Welcome, Guest. Please login or register.
November 22, 2024, 11:51:50 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally E1000/2000 Reel reader control cards.		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally E1000/2000 Reel reader control cards.  (Read 2312 times)
litterbox99
New NLG Member 1 to 100 Post
**

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 100
« on: February 12, 2012, 12:44:43 AM »
I'm trying to diagnose an E2000 slot that's giving me a
41 -2 error on reel card one.  I've swapped a know working
card to the same position and the issue still exists.

In order to eliminate the reel reader control PCB,
can I swap the controller board out with one that
has DIP switches ? This one does not have DIP's.

Are the controllers interchangeable ?
Logged
dhellis
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 56
Offline Offline

Gender: Male
Posts: 172
« Reply #1 on: September 22, 2012, 11:15:36 PM »
Quote from: litterbox99 on February 12, 2012, 12:44:43 AM
I'm trying to diagnose an E2000 slot that's giving me a
41 -2 error on reel card one.  I've swapped a know working
card to the same position and the issue still exists.

In order to eliminate the reel reader control PCB,
can I swap the controller board out with one that
has DIP switches ? This one does not have DIP's.

Are the controllers interchangeable ?






If I am not mistaken, the reader card that includes the dip switches only has two cables that attach to it, the other one has 3 cables that attach

Are your sure that the replacement card is good? I would split the card and then view the infrared transistors and see if the are illuminated. If not
then your card might be bad.
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #2 on: September 25, 2012, 10:44:25 PM »
You have adjusted the reader about 1/16" from the reel? Maybe the connector to the reader has a bad connection? Maybe leave the readers where they are swap the wire connecctors and see if the problem follows the the connector?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 20 queries.