1976 Bally qtr slot

[Marc]

I have a "tilt" light on that does not allow play. How do I reset to remove tilt?

[proten]

     

[knagl]

I've moved this to the Bally section.  You'll need to post more information about your machine, such as a model number, a picture or two if you can, and any information you have as to what may have caused the "tilt" light to come on.

[Marc]

I was told it was a 1976 Bally.  I can't find a serial number anywhere.  Takes 1 -3 qtrs.  it was gift and the previous owner didn't know anything other than info here.    The box is particle board wrapped in fake wood.  I wish I knew more to tell.  Please let me know where a SN would be.

Any info would be much appreciated.

Marc

[RiseLikeRa]

To me it looks like a Bally 1090.  Look for a push button usually located inside the cabinet along the right side.  They are usually silver in color.  If you find one push it.  If you find more than one push them all.

Ra

[Amachanic]

First check the condition of the power cord. Since they come out from under the machine, they are usually damaged. Once that's done look inside behind the hopper and check the fuses.

Gary