Welcome, Guest. Please login or register.
November 23, 2024, 09:22:14 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  My S2000 updates
0 Members and 4 Guests are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: My S2000 updates  (Read 16515 times)
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« on: November 20, 2010, 03:26:44 AM »

I just replaced the vision ready harness with a true S2000 harness
What a chore but well worth it.

Before I did the harness swap I decided to test a new to me 504B that has original IC's from IGT
other than EEPROM error (only lost credits and sound setup) board works great

Then I proceeded to the main event of swapping out the harness.
Other 3 harnesses I made for the original vision ready harness that I am still using.
Topper (originally Spectrum II in it) harness
Stereo speaker harness (not using Amp at this time) have future plans for it.
Power to power dist board (from the senet connector for now)

I got the harness from Slots4home Darrell with quite a few extras.
504B with DD strips from eBay. approx. $60 with nice looking backlit Double Diamond Strips with large symbols.
Now if I could find the 3 or 4 misc harnesses for the top box and a few other things I can say I officially have  a full S2000

Now for the questions
I need to know where the Top Box Power Distribution Board is Powered?
Does the Amp get power from the Power Dist board?
« Last Edit: November 20, 2010, 04:19:01 AM by Foster » Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819



« Reply #1 on: November 20, 2010, 02:25:30 PM »

I just replaced the vision ready harness with a true S2000 harness
What a chore but well worth it.

Before I did the harness swap I decided to test a new to me 504B that has original IC's from IGT
other than EEPROM error (only lost credits and sound setup) board works great

Then I proceeded to the main event of swapping out the harness.
Other 3 harnesses I made for the original vision ready harness that I am still using.
Topper (originally Spectrum II in it) harness
Stereo speaker harness (not using Amp at this time) have future plans for it.
Power to power dist board (from the senet connector for now)

I got the harness from Slots4home Darrell with quite a few extras.
504B with DD strips from eBay. approx. $60 with nice looking backlit Double Diamond Strips with large symbols.
Now if I could find the 3 or 4 misc harnesses for the top box and a few other things I can say I officially have  a full S2000

Now for the questions
I need to know where the Top Box Power Distribution Board is Powered?
Does the Amp get power from the Power Dist board?

Best I can tell it plugs into the bottom middle of the mother board, J2 Netplex 10 pin, along with other wires.

Ron (r273)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #2 on: November 20, 2010, 02:45:03 PM »

The Top Box Power Distribution Board and amplifier get their power through a 10-pin Molex
coming up through out of the back right corner of the topbox.

This is split into 2 Molex plugs:

1) One of the Molex plugs is a 4-pin housing with 2-wires (Red and Black w/Red Stripe) that
plugs into the amplfier at the J8 header location.

2) The other Molex plugs into the right-side of the topbox power distribution board
with a 4-pin Molex housing with 4-wires (Orange/Black w/White Stripe/Red/Black w/Red Stripe)
into the J1 header location.
« Last Edit: November 20, 2010, 02:50:46 PM by stayouttadabunker » Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819



« Reply #3 on: November 20, 2010, 03:08:58 PM »

The Top Box Power Distribution Board and amplifier get their power through a 10-pin Molex
coming up through out of the back right corner of the topbox.

This is split into 2 Molex plugs:

1) One of the Molex plugs is a 4-pin housing with 2-wires (Red and Black w/Red Stripe) that
plugs into the amplfier at the J8 header location.

2) The other Molex plugs into the right-side of the topbox power distribution board
with a 4-pin Molex housing with 4-wires (Orange/Black w/White Stripe/Red/Black w/Red Stripe)
into the J1 header location.

I think he is asking "I need to know where the Top Box Power Distribution Board is Powered?
Does the Amp get power from the Power Dist board? "

I think it's power comes from the mother board instead of the Power Dist board in the bottom.

Ron (r273)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #4 on: November 20, 2010, 03:28:43 PM »

Yes...I agree with you.
The 10-pin Molex up there goes down to the
motherboard like you posted earlier.

Mine gets split as it comes through into the topbox to
both the topbox power distribution board and the AMP.
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819



« Reply #5 on: November 20, 2010, 03:37:21 PM »

Yes...I agree with you.
The 10-pin Molex up there goes down to the
motherboard like you posted earlier.

Mine gets split as it comes through into the topbox to
both the topbox power distribution board and the AMP.

Yep! Mine too.   yes
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #6 on: November 20, 2010, 10:43:21 PM »

Thank you guys,
I had suspected that was the power source but I wanted to make sure I was on the right track using that for the power.
Right now I am using the SENET port on the left side of the top box.
Now to work on that harness and a audio harness that is going to the be trick since I did notice that the amp board has different inputs at different levels of attenuation.
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #7 on: November 20, 2010, 11:46:44 PM »

Power harness for Dist board and Amp Done

I have been playing with various connections to the amp to see what may also fix the buzz static in the speakers with the amp
It is being introduced by the amp itself
I hear no buzz static with a 504B all I did hear on a 501 and 502 was a like a motor or mechanical noise effect when the reels spin maybe that supposed be there.
So far no luck getting the amp to only amplify the sounds from the machine without the unwanted buzz or static.
Will let you folks know what may work besides using the resistors
« Last Edit: November 21, 2010, 04:24:25 AM by Foster » Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #8 on: November 22, 2010, 03:09:11 AM »

I got the amp working with not static.

Use the input harness from IGT or make one that matches it.
No resistors needed unless you want to have more variable volume control
I cant go above 2 or 3 without it being way too loud.

Another question I need to make sure I have the left channel sound going to the left speaker and the right channel sound going to the right speaker.
The MMLB2 sound file test are no help they play out of both speakers.

The stereo sound test plays 3 tones but which of the high tones is for which speaker?
I know the low tone is for the non existent sub woofer in the tray. (that is next in my plans.
« Last Edit: November 22, 2010, 05:49:10 AM by Foster » Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819



« Reply #9 on: November 22, 2010, 11:33:46 AM »

I got the amp working with not static.

Use the input harness from IGT or make one that matches it.
No resistors needed unless you want to have more variable volume control
I cant go above 2 or 3 without it being way too loud.

Another question I need to make sure I have the left channel sound going to the left speaker and the right channel sound going to the right speaker.
The MMLB2 sound file test are no help they play out of both speakers.

The stereo sound test plays 3 tones but which of the high tones is for which speaker?
I know the low tone is for the non existent sub woofer in the tray. (that is next in my plans.


The 4 pin Molex plug on the sound board (J1) Pin #1 is white w/ blue stripe is the left speaker facing the machine.

Pin #2 is green, of course the ground.

Below pin #1 is the white w/green stripe is for the right speaker facing facing the machine,

Beside that is the green, ground wire.


The tray speaker, 2 pin molex  J5, is white w/yellow stripe and green w/yellow stripe.

Hope this helps.


Ron (r273)
 
<edit>  Look in Electronic Diagrams & Parts: Vision/S-2000 Upright manual page 146.
« Last Edit: November 22, 2010, 12:03:07 PM by r273 » Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #10 on: November 22, 2010, 10:50:58 PM »

Thanks
I had to make my own harness for the speakers

Eventually I will try to get the original ones from someone on here.

For Future Reference when the stereo test is done
The sounds are Left, Right and Tray speaker in that order. I do not have the tray speaker but Can still hear it (lower volume in the main speakers)

I did reference the vision top speaker diagrams probably the same as the S2000 versions but none stated which is left or right.
I had figured that Channel A is left and Channel B is right.


Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819



« Reply #11 on: November 22, 2010, 11:28:40 PM »

"I had figured that Channel A is left and Channel B is right."

You are correct. The diagrams are for S-2000/Vision so they are pretty close to the S2000.

Ron (r273)
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #12 on: November 24, 2010, 05:50:50 AM »

I rerouted the printer harness from the reel shelf to the top box.
Removed my custom harness for the printer
I saved the harness that came with the printer.

Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #13 on: March 22, 2011, 12:03:09 AM »

Thanks to Bob P. (Samron Slots)
The S2000 almost has 2 complete top boxes.
I think I have a bad amplifier.
I was hearing the tray speaker test in my main speakers.

When I replaced the amp with the one I got from Bob in use I cant hear it anymore.

Soon it will have a tray speaker.

I still need another netplex cable.

Now to locate that spare candle, fan, fluorescent light harness. It it was made from the vision version.
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602



« Reply #14 on: March 22, 2011, 12:31:03 AM »

Thanks to Bob P. (Samron Slots)
The S2000 almost has 2 complete top boxes.
I think I have a bad amplifier.
I was hearing the tray speaker test in my main speakers.

When I replaced the amp with the one I got from Bob in use I cant hear it anymore.

Soon it will have a tray speaker.

I still need another netplex cable.

Now to locate that spare candle, fan, fluorescent light harness. It it was made from the vision version.

I have a spare candle you can have.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #15 on: March 22, 2011, 12:34:06 AM »

coorslight115 Tbank you!
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602



« Reply #16 on: March 22, 2011, 12:50:13 AM »

coorslight115 Tbank you!

Glad to help ! propeller yummy
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #17 on: March 22, 2011, 01:06:50 AM »

Now if  ever get the chance to play with vision stuff HINT HiINT
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #18 on: March 31, 2011, 04:14:58 AM »

I got the tray back with speaker from Buzz,
What a difference it makes (I like the bass only from the tray
I tried the full range from the 3 pin connector it added too much volume, and I could not go any lower than 1.

I am still pondering converting it to the short reel glass and installing the multi-denom touchpad parts.
The printer will have to stay in the top box.
I am not a metal worker nor do I have the tools or such to do it.
« Last Edit: March 31, 2011, 05:02:28 AM by Foster » Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #19 on: April 19, 2011, 12:16:17 AM »

Swapped out the motherboard and 504B MPU for new to me 1270 Enhanced board.
It was a small chore.

Those connectors got closer to the MPU cover.

Turning around the Comm connector did not help either.
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #20 on: April 19, 2011, 12:23:23 AM »

Swapped out the motherboard and 504B MPU for new to me 1270 Enhanced board.
It was a small chore.

Those connectors got closer to the MPU cover.

Turning around the Comm connector did not help either.

Are you saying that the design of the newer motherboard makes things a little harder to plug into?
Sounds like a little bit of a screwed up design huh?
It's not like there's enough stuff to plug into that board! lol
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #21 on: April 19, 2011, 12:27:15 AM »

They moved the connectors a bit closer to the cover so you have to unplug them before extracting the cover
The communications board connector got rotated 180 degrees.
So the ribbon cable has a twist in it now.
Unless some one can send me the newer version.

And it can theoretically handle 15 reels. 3 connectors with 5 reels each.
That would either be one tall or wide machine

Chip Info
Game Chips    SG000598
Base Chip       SB100026
Version Chip    VS011GX1
Sound SIMM    DSV00022

Yes it will allow $100000 BV limit. I didnt try any higher since all I still have is a 5 5 2 display
I want a 6 6 3 so bad.


« Last Edit: April 19, 2011, 01:36:59 AM by Foster » Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
morspeed
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 470



« Reply #22 on: April 19, 2011, 04:27:50 AM »

Foster, you should be able to find a 6-6-3 fairly easily. Did you try LA Slots? I bought a few from them at a good price. they have a parts email. I can pm it to you. Don't want to post it in the open for spam.
-T
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #23 on: April 19, 2011, 04:32:20 AM »

That will work.
I would have to acquire some other parts to completely go to the short reel glass.
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #24 on: April 19, 2011, 11:35:14 AM »

Yes it will allow $100000 BV limit. I didnt try any higher since all I still have is a 5 5 2 display
I want a 6 6 3 so bad.

I'll tell you what...I wanted a 6-6-3 "bad" obsessed drool  too and got one last year.
I'm not too, too thrilled about it really...  arrow

Pros:  Nice to display larger numbers for penny amount games.  yes

Cons: The digits are much smaller and a touch little bit offset to the right hand-side.  no

If you're accustomed to the 5-5-2 display - you'll notice this right away  banghead
and it just doesn't look too good unless you use a slightly darker
shade of red plastic over the display.

Since I couldn't find one - so,  idea light bulb I used a piece of light shade of auto-tint plastic/vinyl sheet
behind the red plastic which now looks pretty good.  yes

What I haven't tried when swapping games is whether or not the 6-6-2 display
is backwards-compatible with the 5-5-2 games?  Scratch Head  Scratch Head 2 Scratch Head 3
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.126 seconds with 20 queries.