Welcome, Guest. Please login or register.
November 24, 2024, 12:21:51 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Universal Reel/Video Games. (Moderator: uniman)
| | |-+  Universal Ultra Slot Machine
0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] 2 3 Go Down Print
Author Topic: Universal Ultra Slot Machine  (Read 67629 times)
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« on: November 26, 2008, 10:50:01 PM »

Thought I would add some Uni Ultra info.
Sometime in the early 1990's Universal must have realized their slot machine platform from the early 80's, modified several times, just wasn't going to cut it anymore. So they developed a new machine, the Ultra Series. It appears their thought process was the machine with the biggest, widest reels and booming stereo sound wins the player's attention. The earlier Universal had reel strips 1/8" narrower and 1-1/4" shorter than the IGT S+. The Ultra reel strips are 3-3/4" wide and the same length as the IGT. The reel glass is as large as the top glass at 12-3/4" tall. The belly glass is 9-1/4" tall, up from the 8" belly glass of the older Universals. The button deck was also enlarged.
All Ultra slots have backlit reels and stereo sound through two 8 ohm, 10 watt speakers. Universal developed the MPU using the same processor as their earlier games, the Z80. The sound program is located on a 27C256 eprom and there appears to be only one program. There is one "System" or machine chip that serves all games whether one-line, three-line, five-line, nudge, or respin*. (* have yet to find a respin game in the Ultra Series) The machine and "Game" chip are on a 27C512. I have found two versions of the machine chip, more on that later!
There is one more chip called the "Support" chip. I am guessing this chip is for communication to the DBV-145 and it is on a 27C128.
The only other external boards are a very small relay board for the handle, sound board, hopper board on the hopper, and the backplane board. Universal never had an external chip like IGT. 
I believe it cost them!!!  frying pan
All the Ultra's I have seen have been manufactured in 1996. Games were released in 1995 and 1996 as their copywrites indicate. So the Ultra Series was short lived.
Why?
My guess is that the slot machine market was tough in the mid 1990's with WMS introducing the dotmation, IGT the S2000 and vision series, and all the video slots from Aristocrat, etc. And I believe the Ron Harris (Nevada Gaming Tech gone bad) confession in 1995 that he rigged Universal slot machines (older models) did them in.
Mr. Harris rigged Universals because;
1. They had the Z80 processor that was widely used and easily understood.
2. They had no external chip outside the MPU like IGT.
3. And most of all, all unwritten code was not driven to zero!!! What this means is the chip can be easily written to again!  Duh!

The second version of the "Machine" chip I mentioned earlier has all unused code set to zero. So it would seem this was released after Mr. Harris confessed. Too little, too late!

« Last Edit: July 10, 2010, 02:42:19 AM by uniman » Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #1 on: November 26, 2008, 11:39:37 PM »

I love to learn new things, Thanks for you post,  Do you have any pictures of these?

Thanks again,  applause
Wayne
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #2 on: November 26, 2008, 11:45:45 PM »

Listing of known Ultra Games;

An "a" or "b" denotes a clone game.

95010-  Wonder Bar   2 or 3-coin                                            
95016-  Double Marquise   2 or 3-coin
95018-  Twin Crowns    2 or 3-coin
95018a- Twin Cherries  2 or 3-coin
95019-  Triple Crowns  2 or 3-coin
95019a- Triple Cherries 2 or 3-coin
95020-  Title Match 2 or 3-coin, nudge on third reel
95020a- AfterShock 2 or 3-coin, nudge on third reel
95021-   Payload  3-coin, 2-coin?
95027-   Magnificent 7's 3-coin buy a pay
95033-   Super Jackpot 7's 3-line
95034-   Sterling 7's with 4th coin bonus   3-line
95034a- Jackpot 7's with 4th coin bonus   3-line
95034b- Cool 7's with 4th coin bonus       3-line
95038-   Double Lightening 5-line
95039-   Wild Orchid  3-coin buy a pay
95040-   Magic Doubles  2-coin nudge game
   FOUND!! in 2011, thanks KEVBOY !!

96000- unknown game
96001- Hot Doubles 2, 3, or 5-coin
96004- Fiery Doubles 2, 3, or 5-coin
96009- Total Impact 2, 3, or 5-coin
96019- Bonus 7's  3-coin
96023-  Eagle Millions   3-line custom game for Soaring Eagle Casino
96025- Super Stars & Stripes 3-coin, 2-coin?

95037     -  Silver Bullet 7's
?     -  Eagle Magic  looks like clone of Double Gold-an old uni game, custom game for Soaring Eagle Casino

Bolded titles I am looking for!To keep it simple above, game chip identification is longer than stated, like      95040-2MR-0002.
95040 is the Magic Doubles game
2MR is a 2-coin multiplier game with a 2500 coin jackpot. (an "R" type game)
0002 designates it as a 97.4% chip from the table list. (my table list is incomplete)

Machine Chips
94033-19
94033-24

Sound Chip
95010-SND-0003

Support Chip
94014-005


« Last Edit: August 28, 2011, 05:27:48 PM by uniman » Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #3 on: November 26, 2008, 11:59:44 PM »

A few pics, just a few;  bust gut laughing

I found a box of the orignal card reader bars as shipped by Universal with the full nameplate. Nice, no holes to cover!


* ultra-eagle-magic.JPG (51.05 KB, 299x639 - viewed 1124 times.)

* ultra-mag7's.JPG (45.92 KB, 309x639 - viewed 1374 times.)

* ultra-silver-bullet-7's.JPG (47.52 KB, 316x637 - viewed 1656 times.)

* ultra-sterling-7's.JPG (54.34 KB, 305x637 - viewed 1372 times.)

* tri-chrs.jpg (47.94 KB, 312x638 - viewed 1256 times.)

* trip-crown.jpg (53.33 KB, 312x638 - viewed 1900 times.)

* ultra-bonus7's.JPG (44.15 KB, 277x594 - viewed 1148 times.)

* ultra-titlematch.JPG (41.17 KB, 319x626 - viewed 977 times.)
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #4 on: November 27, 2008, 12:07:37 AM »

I have few videos on YouTube. If you do a Universal Ultra search you will find them. Believe they were slant tops.



Videos have been removed
« Last Edit: July 10, 2010, 02:45:56 AM by uniman » Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #5 on: November 27, 2008, 01:33:12 AM »

Please forgive me while I babble on about the Ultra Series, writing this for the Universal area.

If your reading this and own a Universal Ultra, please log on and share your machine with us!  yes

Universal Ultra Memory Switch Table
You can access the Memory Switch Table by pressing the green test button 14 times.
There are two 8-bit pages. They are pages 0 and 1. Each page has eight binary bits listed as 0 thru 7.
After pressing the test button 14 times you will see a zero in the Coins Played Meter and Win Meter, and four zeros in the Credit Meter.
Coins Played Meter is the page number (0 or 1)
Win Meter is the bit number (0-7)
Credit Meter is the current bit setting (0000 or 1111)

To access a page (0 or 1), press the Bet One button.
To access a bit (0 thru 7), press the Spin button.
To change the bit setting (0000 or 1111), press the Max Bet button.

What they do;

Page 0
bit 0          Tower Light
0 = Tower light flashes for Jackpot, Call Attendant, and stays on for Door Open
1=  Tower light stays on for Jackpot, Call Attendant, and Door Open.

bit 1        Starting Speed for Max Bet
0 = Normal
1 = High                           Note: Normal is better!

bit 2       The Third Reel Reach Feature
0 = no feature
1 = feature on        (If you get two 7's or higher on first two reels, third reel spins longer with special sound) very nice

bit 3       Reel position Detect Error
0 = Disabled
1 = Enabled   (detects if reels were moved, gives errors 81-84) I've never messed with it

bit 4      1st - 5th Lite Lamps
0 = all lamps always on
1 = synchronizes with played lines

bit 5    Jackpot Tower Lamp
0 = activated for top jackpot hit (either flash or always on from bit 1)
1 = activated for all progressive hits

bit 6    Hit Sound mode
0 = synchronize with payout
1 = no synchronize with payout (Note: not as described, two different sounds for coin-in and payout, both are sync'd)

bit 7   Reel Stop Data
0 = Same as existing models
1 = Smooth type action   (smooth type action??, it shakes at every stop!!)


Page 1

bit 0        Reel Pre-move
0 = Normal Start
1 = Delayed start action when game starts (Now this is a strange one!  Scratch Head Every 51 spins the reels reverse about 1/2 inch and then go forward as normal. I found the code in the game chip, and yes, every 51st spin???)

bit 1    Super Reach
0 = No change
1 = More reel speed reduction after normal reach feature (I have found this only on Super Jackpot 7's. Very cool feature! Special sound with the third reel in slo-mo. It is random and does not happen with every reach feature. Generated more often with wins than loses.)

bit 2   Random Nudge
0 = no action
1 = nudge action (This works on mixed bars or two mixed bars with wild/multiplier symbols only. And only on single line games, but not Twin Crowns or Twin Cherries.) Cool feature but do not know how it could be applied in a casino without major explanation?

Bits 3,4,5,6,7 on Page 2 not used.

If you clear the RAM, these settings are lost, must re-enter.

« Last Edit: August 01, 2010, 12:11:21 PM by uniman » Logged
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113



« Reply #6 on: November 27, 2008, 04:44:44 AM »

Good Old Universal

Over here we know them as the 8116, 8800,9400 and 9600. This was the first machine I got training on and  worked on when i started in the casino biz (Sun International - South Africa - 1998)
At that time they had almost 90% market share in the SA casino's and there are still plenty of the ultra's in SA. Very easy to fix and pretty reliable exept for the slantop. Removing the backplane board from that is a nightmare
and should have EPROM listings somewhere. Will try and locate them.
Have softcopy manuals for the Ultra -Drop me a line if anybody needs them.
Should have EPROM listings somewhere. Will try and locate them.

Regards
Ian
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #7 on: November 27, 2008, 12:19:30 PM »

TZtech,
Eprom listings would be great!  applause applause applause
Copious amounts of Karma if you find them.  Hail Hail Hail

I do not believe the 9600 ever made it to the United States. I have a partial browser based manual for the 9600 and looks like an upgrade of the 9400.
I have a soft copy manual for the Ultra, but it was faxed, by Universal, and the schematics are very difficult to read.
If you have legable schematics I'm interested!
Also have no info on progressive two-way communication.

Here is a manual pic of the 9600 Slant Top and manual page.

By the way, what is a Condor? Is that a brand of bill validator?


* 2_SLANT.JPG (17.96 KB, 267x400 - viewed 971 times.)

* MANUAL_1.JPG (209.9 KB, 595x479 - viewed 1152 times.)
Logged
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113



« Reply #8 on: May 21, 2009, 04:26:52 PM »

Hello Uniman

Better late than never. Have a look at this site. It lists all the universal games approved for the western cape province in South Africa.
http://www.wcgrb.co.za/Downloads/LOC/200904/Aruze-Software.pdf

There are a bunch of Universals (Now Aruze) other product in there but it does have 95XX ,96xx,97xx and even 02xx listings. As far as i know the paytable chips are identical worldwide.
Also found a 8116 gamebook. As soon as i have scanned it i will post it.

PS - Condor is a make of programmable coin acceptor. The universals over here all use CBV bill validators.

Regards
Ian
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #9 on: May 21, 2009, 11:06:18 PM »


FANTASTIC !!! applause applause applause applause applause applause applause applause applause applause applause applause applause applause applause
It was worth the wait. Thank You!

All games listed as 95000's and 96000's I'm sure are Ultra Series. I see they made Double Jokers Wild, Phantom Spin, and Double Thunder in Ultra Series. Never seen one.  bawling
The hunt begins!!

 Hail Hail Hail            Thanks again! The copious amounts of Karma begin!     Hail Hail Hail

Uniman
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!


« Reply #10 on: May 22, 2009, 01:22:11 AM »

Jim, is there a way to tell which listings are Unis, aside from the 95000 and 96000 values in the third column?
Logged

I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113



« Reply #11 on: May 22, 2009, 08:45:56 AM »

Hi SB

Anything with a hardware LOC of ZT0058 or ZT0057 is a Ultra. ZT0057 is the slantop and ZT0058 is the upright. There was also a model called the sunrise (ZT1900). Cant remember what the difference was to the ultra but the SW works across all 3 platforms.

Regards
Ian

Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #12 on: May 22, 2009, 11:59:33 AM »

Hi SB

Anything with a hardware LOC of ZT0058 or ZT0057 is a Ultra. ZT0057 is the slantop and ZT0058 is the upright. There was also a model called the sunrise (ZT1900). Cant remember what the difference was to the ultra but the SW works across all 3 platforms.

Regards
Ian

Thanks Ian,
I notice only the Game or sometimes called the Personality chips are listed. Did they list the Machine or System chip associated with the games or the sound chip(s)? 

I know in the US the (Machine) System chip was 94024 for all games. And, all games I've found use the same sound chip.
What I find puzzling is there is a sound test for "respin sound", yet no sound is there?
I see Phantom Spin is one of the games listed and that game respins. Maybe you need that Game chip installed to hear that test? Or maybe a special sound chip?

From what I can tell, the Sunrise Slot is the Ultra with a newer version of Main PCB.
Logged
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113



« Reply #13 on: May 22, 2009, 12:58:14 PM »

Hi

Yes - Each game has to be approved individually. If you go to the site www.wcgrb.co.za you can actually select what category of approval you are looking for. Under the Aruze tap there should be a system approvals selection which should give you a PDF of all the system chips.
There is also info for IGT, Aristocrat etc etc but please note these will be different from whats available in the states.

Regards
Ian
Logged
bikerman
NLG Member 101 to 500 Post
***

Total Karma Storms: 0
Offline Offline

Posts: 136



« Reply #14 on: August 26, 2009, 08:43:53 PM »

Is it worth getting  universal machine? I have a guy that is looking to sell a firey doubles machine that is ot working.
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #15 on: August 27, 2009, 12:36:08 AM »

Is it worth getting  universal machine? I have a guy that is looking to sell a firey doubles machine that is ot working.

I assume this is an Ultra Series.
Depends on the price and what's wrong with it.
If you can get an IGT S+ for the same price, I would say get the IGT. (Can't believe I said that)
The reason is parts are very hard to find. The dollar bill validator cannot be upgraded to accept newer bills.
If the main board is bad, good luck finding another.

Now the good points; very rare machine, few were made. So you would be the only one I know who owns a Fiery Doubles. They are that rare. Stereo sound and big backlit reels are nice.
If the problem with the machine is constant error codes like hopper jam, reel error, etc, chances are the problem is the board making good contact with the backplane. This problem can lead you on a wild goose chase real quick.
Logged
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #16 on: August 27, 2009, 01:28:24 AM »

If you can get an IGT S+ for the same price, I would say get the IGT. (Can't believe I said that)

Did you really just say that?!?!?

 Scratch Head

Dan #2
Logged

A great man once said, "I was told last time I would get a piece of cake."

pistachio62
Guest
« Reply #17 on: March 25, 2010, 01:03:46 AM »

I just bought a Universal slot machine, it's a Super Stars & Stripes, and I'm having an issue with it... It turns on, but it appears as though its calling for an attendant for repair. Its flashing a bunch of numbers that don't have any relation to the codes on the inside of the machine. The coin rejection solenoid keeps clicking back and forth and the light on top is flashing. None of the fuses are bad and none of the buttons on the inside are working. I was wondering if anybody knew what was going on? Thanks, I know this is an old topic, but still... The codes are as follows first it flashes a 1 and a 3 and then 0 and a 1, then 00 in the first spot and then a 1 in the third spot with a 0 in the fourth. Thanks in advance...
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #18 on: March 25, 2010, 02:09:51 AM »

I just bought a Universal slot machine, it's a Super Stars & Stripes, and I'm having an issue with it... It turns on, but it appears as though its calling for an attendant for repair. Its flashing a bunch of numbers that don't have any relation to the codes on the inside of the machine. The coin rejection solenoid keeps clicking back and forth and the light on top is flashing. None of the fuses are bad and none of the buttons on the inside are working. I was wondering if anybody knew what was going on? Thanks, I know this is an old topic, but still... The codes are as follows first it flashes a 1 and a 3 and then 0 and a 1, then 00 in the first spot and then a 1 in the third spot with a 0 in the fourth. Thanks in advance...

First of all, welcome to NLG pistachio62.  wave
You mention "first spot" & "third spot" & "forth"??   Not sure what that means? There are the COINS PLAYED, LAST GAME, WIN METER, and CREDIT METER.
But it really sounds like you need to perform a RAM clear. It is a very simple procedure. Click this link; http://newlifegames.net/nlg/index.php?topic=1295.0

Normally you should see codes 13 and 50 flashing when starting up the machine. Code 13 is "power interupt" and 50 is "door open".
After a RAM clear you should see codes 19 (All Clear) and 50. Close and lock the door and the 50 should go away and 51 will flash. Code 51 is "door closed".
The Insert Coin light should be flashing. When the Insert Coin light is flashing it should then accept coins.

Perform the RAM clear and let us know what happens.
Uniman

One more thing, your machine is an ULTRA SERIES, right? 
Logged
pistachio62
Guest
« Reply #19 on: March 25, 2010, 02:14:12 AM »

Thanks a ton, I did mean Coins played, last game, win meter, and credit meter, I just wasn't looking at the machine, and got lazy... Sorry... I'll Try this tomorrow and come back with the results, thanks again...

Sorry, I'm not quite sure how to tell if it is an ultra series, but i'm pretty sure it is...
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #20 on: March 25, 2010, 02:24:27 AM »

Thanks a ton, I did mean Coins played, last game, win meter, and credit meter, I just wasn't looking at the machine, and got lazy... Sorry... I'll Try this tomorrow and come back with the results, thanks again...

Sorry, I'm not quite sure how to tell if it is an ultra series, but i'm pretty sure it is...
Hey, no problem. Just want to make sure we are talking about the same thing.
If it is ULTRA SERIES it will say so in the upper lefthand corner of the reel glass.

Another common problem with the Ultra's is the main board not making good contact with the backplane. If after your RAM clear it is still acting up try gently rocking the board by pressing on the white pull tabs on the board. DO THIS WITH THE POWER OFF. Then power up again with a RAM clear.

One more thing, I've been having trouble logging on at various times. If I don't reply within about 36 hours you can email me. Click on my name to get my email address.
Logged
pistachio62
Guest
« Reply #21 on: March 25, 2010, 02:30:42 AM »

I'll Have to check tomorrow if it is an ultra series... Whats the difference if its not, I really think it is, but still what is the difference?
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830



« Reply #22 on: March 25, 2010, 02:34:10 AM »

Totally different MPU board, reels, hoppers, etc. RAM clear is one button instead of three.
But I suspect yours is an Ultra, don't think they made SUPER Stars & Stripes until the Ultra came out.
Logged
pistachio62
Guest
« Reply #23 on: March 25, 2010, 02:39:04 AM »

I know it is an ultra, it has the same mother board as the picture that was on the reset Ram page... and will do on the e-mail deal... Sorry I didn't address that in the last message...

I have another question if thats okay... How much is a Universal machine thats in pretty good shape worth? Are they rare at all or whats the deal with them as far as pricing goes... I didn't pay that much for this one... Also are bill acceptors common in these machines?

Oh and thanks again.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #24 on: March 25, 2010, 02:46:00 AM »

Pistachio, can you show us a nice picture of it? Please, pretty please? obsessed drool smiley drool Jumping for Joey
Logged
Pages: [1] 2 3 Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.119 seconds with 20 queries.