Welcome, Guest. Please login or register.
October 31, 2024, 10:14:58 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  SIGMA Video Games.
| | |-+  Sigma SG112B Problem		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Sigma SG112B Problem  (Read 3505 times)
dcslots
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 126
« on: January 19, 2011, 02:09:39 PM »
This is going to be a very broad question, as I am trying to help someone who is not in the US and does not speak english.

They are running Sigma SG112B Video Poker, Coin In.

They are getting the following errors:

Coin In drop/Jam
Time Out Error

No idea how to tech a Sigma (last one I actually worked on was a treasure tunnel, which is an entirely different animal).

Any ideas on how to begin fixing this or where to start checking? 
Logged
The other night upon the stairs, I met a man who was not there.  He was not there again today.  I wish I wish he'd go away.
tacman
NLG Document, Media Gallery and FAQ Writer
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #1 on: January 19, 2011, 02:52:21 PM »
 You've Got Mail

 Dan (tacman)
Logged
Coinopcollector
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 25
Offline Offline

Gender: Male
Posts: 38
« Reply #2 on: February 28, 2011, 10:47:28 AM »
Hello, the error you are talking about is caused because of the coin diverter is eather stuck or not in the good position for the coins to drop into the good direction.
What i am trying to explain is, if the coin diverter is stuck for the coins being dropped to the hopper and the machines software thinks it should be directed to the cashbox in the bottom cabinet, you get this error because the bottom coinoptics do not get a pulse of a coin passing trough.

Most of the time, the coin diverter has a bad solenoid or the solenoid is just stuck from not being used often enough.
Sometimes a little wiggling on the diverter solves this problem but if you have a solenoid that has been to hot or that's used to far, you will get this error back soon.
Solution, change the solenoid from the coin diverter.

Hope this helps your customer.
Kind regards, Didier - Belgium.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.083 seconds with 19 queries.