FIXED...DBV 200 IGT Slant Top issues.

[knagl]

The set chip is marked with
Malaysia
am270512
-2550c
9640mpn
copyright 1986 amd

That tells us who manufacturered the EPROM chip, but doesn't tell us what data is burned on there.  Kind of an obsolete analogy now, but that's kinda like saying that the floppy disk is made by Sony and has a 1.44mb capacity -- that doesn't help to know what is on the disk.     Was there any label on there from the person you bought the chip from, like "SET15" or "SET090"?

Mine does not look like that at all.  Mine does not have a door.

How do you get the money out of the can?  Does the cash can you have fit correctly into the area below the bill validator?  Can you post a picture of the can you have now, and to also help us a picture of what you have installed in the machine to date so we know where you've progressed to?

[motom67]

Box inside of Machine

[motom67]

pic 015.  Box removed.  pic of inside where the two pins from the transporter.  Gear of the transporter on the left. 

Pic 016.  Pic of the cash box are without the cash box inserted.

[poppo]

The transport is seated properly. Someone else will have to chime in on the cash can since I don't have a slant top.

Can you show us a picture of what you meant when you said the can did not have a door (i.e. the inside of the can)

[motom67]

pic 017.  Cash box pic 1.  Behind the circle is a large spring that compresses when pushed with minimal force.  

pic 018.  Cash box pic 2.  This says THIS SIDE UP AND OUT but I put it in the frame as it fits the easiest.  

[motom67]

pic 020:  This is how I put this in. 

pic 021:  This is all the way back.  It feels like it is seated correctly. 

[poppo]

The top picture does indeed look like it is missing the stacker. That spring loaded plate just holds the bills in place against the stacker.

I have no idea about the second picture.  

[motom67]

021

[motom67]

<a href="http://www.youtube.com/v/yPZTIyPG1jI&rel=0" target="_blank">http://www.youtube.com/v/yPZTIyPG1jI&rel=0</a>

<a href="http://www.youtube.com/v/afxRec-qWnk&rel=0" target="_blank">http://www.youtube.com/v/afxRec-qWnk&rel=0</a>

[motom67]

The set chip is marked with
Malaysia
am270512
-2550c
9640mpn
copyright 1986 amd

That tells us who manufacturered the EPROM chip, but doesn't tell us what data is burned on there.  Kind of an obsolete analogy now, but that's kinda like saying that the floppy disk is made by Sony and has a 1.44mb capacity -- that doesn't help to know what is on the disk.     Was there any label on there from the person you bought the chip from, like "SET15" or "SET090"?

Mine does not look like that at all.  Mine does not have a door.

How do you get the money out of the can?  Does the cash can you have fit correctly into the area below the bill validator?  Can you post a picture of the can you have now, and to also help us a picture of what you have installed in the machine to date so we know where you've progressed to?

This is what it said on the chip before I took it off to find the numbers... BILL VALIDATOR SET CHIP.  I got it from ebay. I'm not sure I can post where I got it from.  The seller has no posting on what it type of chip it is.

[poppo]

Well, we really need a slant top expert here. That power up cycle almost sounds normal (actually sounds too short). But I don't know what a slant top is supposed to sound like.

[poppo]

This is what it said on the chip before I took it off to find the numbers... BILL VALIDATOR SET CHIP.  I got it from ebay. I'm not sure I can post where I got it from.  The seller has no posting on what it type of chip it is.

If it let you enable the validator, the set number is really not that important. You can look through the normal self test settings to see if it is actualy enabled and if the denomination is set properly. But someone needs to look at those cash can pictures and see what the deal is.

[JOHN42355]

THE PROBLEM WITH THIS CASH BOX ISSUE, IS THAT IT'S THE WRONG BV CASH BOX. THAT CASH BOX YOU ARE USING IS FOR BALLY AND WILLIAMS. THE IGT ONE LOOKS LIKE A WBA STACKER BOX. HOPE THIS HELPS.

[poppo]

THE PROBLEM WITH THIS CASH BOX ISSUE, IS THAT IT'S THE WRONG BV CASH BOX. THAT CASH BOX YOU ARE USING IS FOR BALLY AND WILLIAMS.

Well, that explains that. I'm still puzzled as to why the transport does not cycle more times looking for the 'right' box.   Unless this box is actually jamming the transport gear and that is why it cycles so short.

[motom67]

<a href="http://www.youtube.com/v/_4A4n9RkTo8&rel=0" target="_blank">http://www.youtube.com/v/_4A4n9RkTo8&rel=0</a>

This movie is the machine cycling without the cash can. 

[poppo]

This movie is the machine cycling without the cash can.  

Yeah, now that is more normal (without a can). I think if you get the right can you will be in business.

[JOHN42355]

YEP , HE WILL BE ALL SET WITH THE RIGHT BOX. I AM SENDING HIM THE PROPER BOX, AS I NOTICED HE BOUGHT IT FROM ME, BUT WHEN HE EXPLAINED HE HAD A DBV200 HEAD SET UP , I DIDN'T KNOW THAT IT WAS FOR A IGT SLANT , I THOUGHT IT WAS FOR A BALLY UPRIGHT..LOL ... ANY WAY ONE IS IN THE MAIL..

[poppo]

YEP , HE WILL BE ALL SET WITH THE RIGHT BOX. I AM SENDING HIM THE PROPER BOX, AS I NOTICED HE BOUGHT IT FROM ME, BUT WHEN HE EXPLAINED HE HAD A DBV200 HEAD SET UP , I DIDN'T KNOW THAT IT WAS FOR A IGT SLANT... ANY WAY ONE IS IN THE MAIL..

Great. 

[motom67]

Thank you, Thank you.  I will send a update when I get the product and install it.     Thanks Rudysdeals.com

[JOHN42355]

JUST THINK!!! BY SATURDAY YOU WILL BE PUTTING THOSE HUNDRED DOLLAR BILL'S IN YOU MACHINE... LOL

[Jim]

I thought this was a dead issue after posts #21 and #23.  poppo posted the picture of the correct cash can, and then provided a link with another picture of the right cash can.

For future reference:  that cash can is used in all DBV-145 and DBV- 200, IGT slant tops and upright machines. the WBA series uses one similar, however they are not interchangeable. the outer housing can be used for the dbv's and wba's,(the housing with the door). the inner housing is specific to the unit, however it fits in the same outer housing. the power supplies, which mount to the outer housing, the black covered one with vents can be used for either 145's or 200's. the wba series uses a power supply ( which fits in the same area) that is specific to itself.

Jim    

[motom67]

Can't wait!   

[motom67]

I got the right box  .  It was as pictured earlier.  Thank you!  The system is now in sync with a couple minor faults.  This now brings up a couple questions.  The BV takes large and small bills with no problem.  However, the hopper pays out the coins but I need the machine to give credits instead.  I've read other posts and I think its a DIP switch on the Mother board.  I think..!  I'm wondering how to make the bills turn to credits.  I'm also having issues with the BV face plate.  It doesn't light up at all.  It's connected.  I've also tried swapping it with another and still nothing.  Is there any way to have this corrected?

[knagl]

The quick and dirty way to get bills to credits instead of paying out from the hopper is to press the "Cash/Credit" (or "Cash Out") button once before you insert a bill.

The "correct" and more permanent way to fix it to force all bills to credits is dependent on the SP chip in your machine.  Older chips use the DIP switches to make that change, newer SP chips use a setting in the self test menus.  What SP chip do you have in your game?

(If you don't know, here are directions on how to determine which chips you have: http://www.newlifegames.net/spset/SPSS.htm )


As far as the bezel (the faceplate), first are you sure that it's good?  I know you tried two of them and that would point to something else, but at the same time, if they're broken then no amount of fixing or troubleshooting wiring will make them work.   Second, trace those orange wires that plug into it (I think they're orange, anyway) all the way back to wherever they go to make sure they're not cut somewhere.

[motom67]

SS7851

Not sure the bezels work.  I'll check em out