Welcome, Guest. Please login or register.
November 23, 2024, 03:21:54 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally 6000 w/wheel-code 8100		 0 Members and 3 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 6000 w/wheel-code 8100  (Read 11539 times)
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« on: March 10, 2011, 11:09:32 PM »
A friend called. His Bally 6000 w/wheel on top. The wheel keeps turning & he has a code 8100.
Any idea what he should look for? Thanks for any help.
Ford
Logged
Mr. Dinoman
Mr. Dinoman
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 542
« Reply #1 on: March 10, 2011, 11:36:10 PM »
Error 81-00 is a low battery error...Check the voltage of the battery on the MPU...If low he will have to replace and most likely have to do a partial or full ram clear...
Hope this helps...
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #2 on: March 10, 2011, 11:41:02 PM »
Thanks. I'll let him know. I'll most likely have to go do it.
Logged
Mr. Dinoman
Mr. Dinoman
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 542
« Reply #3 on: March 10, 2011, 11:54:13 PM »
Do you have the clear ram chips and/or manual for the machine?
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #4 on: March 10, 2011, 11:59:26 PM »
Yep. Thanks. All I need is time to go look @ it.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #5 on: March 16, 2011, 09:53:46 PM »
I put a new battery in & had to reprogram it. Now I get code 9.1.0 on machine (which is no communication)
& progressive comes up 0000 then goes to C1.
I say thanks for any help. It seems that somehow there should be a way to reset to make communication.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #6 on: March 16, 2011, 11:18:08 PM »
the progressive controller lost it settings.  You need to program it again. 

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #7 on: March 16, 2011, 11:24:48 PM »
That's what I was afraid of. I don't have setup to program it.
Is there a way that can eliminate the progressive & not lose wheel?
Logged
PWRSTROKE
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 246
Offline Offline

Gender: Male
Posts: 1860
« Reply #8 on: March 16, 2011, 11:30:10 PM »
Yes there is I did it a couple months ago.  Let me pull my notes and I will respond if no one else does. The game WILL work without the progressive meter being set up.  Get back with you-B.
Logged
PWRSTROKE
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 246
Offline Offline

Gender: Male
Posts: 1860
« Reply #9 on: March 16, 2011, 11:49:21 PM »
In your Menu options from my scribble on notes here under xtra 11d- then navigate (a manual helps) I have a lot of listings but the pertinent ones should be progressive type using serial michon--set to 4,  # of JP progressive- set to 1, 78 Lo -1,73-0 .  These were some of my notes without me digging the thing out and firing it up.  Mine works fine without the progressive meter configured.  It still lights up I think it sits on zero and does nothing but the machine WILL function.  The configuration for the progressive can be programmed from a few of our vendors here for the complete operation.   I will dig out some more notes and pull the actual machince and confirm the settings as time allows.  Thanks B.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #10 on: March 16, 2011, 11:55:12 PM »
Thanks Pwrstroke & a69mopar. I can't get to look @ machine again until Sat.
Logged
PWRSTROKE
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 246
Offline Offline

Gender: Male
Posts: 1860
« Reply #11 on: March 17, 2011, 12:03:13 AM »
I will find the rest of my notes on what I did----------also if you asked nicely if he is available talk to Chris.  I will pm you the number and you would be armed with all the info you ever needed to fire that old girl up with progressive in-op.  I have purchased from him as well and He is good fella.  B.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #12 on: March 17, 2011, 12:30:53 AM »
When you perform a complete saferam clear, don't set the progressive settings.  Option 2 should be 0000 or off, option 7 should be 0000 or no progressives.  There's no reason to set 78 when not using a progressive.  You can pretty much just set your limit settings and printer settings if there is one in it.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #13 on: March 17, 2011, 12:35:07 AM »
Thanks. I think with what you & Barry told me I can get it going.
Will keep you in touch.
Ford
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #14 on: March 17, 2011, 12:39:18 AM »
Would be a shame though to not have the progressive running?  Ship me the Mikohn board Ford and I will charge the battery and re-program it for him.  I can mail it direct back to your friend to reinstall.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #15 on: March 17, 2011, 12:39:56 AM »
What I posted was to set the machine as non progressive.  To program the progressive is another thing.

Have a great night,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #16 on: March 17, 2011, 12:43:56 AM »
Quote from: Bettor Slots on March 17, 2011, 12:39:18 AM
Would be a shame though to not have the progressive running?  Ship me the Mikohn board Ford and I will charge the battery and re-program it for him.  I can mail it direct back to your friend to reinstall.
Thanks Jim. I'll mention it to him and see which way he wants to go.
Ford
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #17 on: March 17, 2011, 01:01:47 AM »
Here's my 11d settings after the clear if it helps you in the field Ford (this assumes progressive is running - Otherwise follow Wayne's comments on the #7 setting) (also some unnecessary settings, but ones I like added):

Machine with coin mechanics:

9 = 4

2 = 4

7 = 1

78lo = 1

51 = 9999

54 = 0

56 = 160 (set this for max you want the hopper to pay out, anything higher goes to hand pay)

58 = 1000

73 = 0

61 = 1

81 = 1

69 = 0  (assumes coin acceptor is by Coin Mechs Inc.) (use 69 = 1 if by IDX)


Machine no coin mechanics / hand pay upon cash out:

9 = 4

2 = 4

7 = 1

56 = 0

51 = 9999

58 = 1000

78lo = 1

73 = 0

61 = 1

81 = 0
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #18 on: March 19, 2011, 08:12:52 PM »
Got it running today. He did not want to do anything to progressive now so I set it up like a regular without progressive.
It would have been nicer with progressive but he said maybe later. It's his machine to do as he wants.
Thanks for offer Jim & all you guys that helped. +1 (Karma, or whatever)
Ford
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.118 seconds with 21 queries.