Welcome, Guest. Please login or register.
November 23, 2024, 03:06:17 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  S+ DBV won't work? please help.		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: S+ DBV won't work? please help.  (Read 13096 times)
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« on: March 19, 2011, 11:32:45 PM »
I got a S+ that had a dead battery (12) code, I installed a new onw and used a set chip to change the denomination to .25. I enabled the dbv per instructions, got to the 61-1 ding then closed the door and turned the reset key one time. The machine works fine with quarters and pays out correct, but the dbv will not light up or take bills, any help on this?

Thanks
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: March 20, 2011, 12:12:50 AM »
When you turn the machine on or remove and install the cash can doe the BV cycle?
Look at the left side of the head. any LED's on

also be sure the transport is fully seated at the back. if it is not seated the BV will not enable, since it can not cycle the cash can stacker.
it helps to reach in and press it down from the left side.

Also check SP PSR to see if it needs ID 23 or 22 for BV
Switch 1 - 10 off is ID 23 on is ID 22.
 
You've Got Mail
« Last Edit: March 20, 2011, 12:20:32 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #2 on: March 20, 2011, 12:23:53 AM »
I push the cash stacker all the way in, close the door, it cycles like it is ready to accept bills, but there is a red led light on inside the bill chute. It will take in a bill but sends it back out. Also how do I check the SP PSR? for ID 22 or 23?

Thanks
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #3 on: March 20, 2011, 12:26:31 AM »
unless you are using a odd or old SP chip it probably is ID 23, but if you post the SP chip number I can check and send you PSR if I have it.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #4 on: March 20, 2011, 12:28:49 AM »
sp is 1271
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #5 on: March 20, 2011, 12:29:33 AM »
Quote from: BR549 Auto Sales on March 19, 2011, 11:32:45 PM
I got a S+ that had a dead battery (12) code, I installed a new onw and used a set chip to change the denomination to .25. I enabled the dbv per instructions, got to the 61-1 ding then closed the door and turned the reset key one time. The machine works fine with quarters and pays out correct, but the dbv will not light up or take bills, any help on this?

Thanks

Did you use a set 15? if so what SP and SS chips are you using?
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #6 on: March 20, 2011, 12:30:15 AM »
Quote from: BR549 Auto Sales on March 20, 2011, 12:23:53 AM
Also how do I check the SP PSR? for ID 22 or 23?

You can always power the machine off and flip DIP switch 10 the opposite way on the bottom of the BV head. You will need to check it anyway once you find out what it should be set to. In case you don't know, all you need to do is take the one screw off the bottom front center of the head bracket to remove it.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #7 on: March 20, 2011, 12:36:46 AM »
Quote from: BR549 Auto Sales on March 20, 2011, 12:28:49 AM
sp is 1271


Here is the PSR
* SP1271_-_backup.pdf (541.49 KB - downloaded 178 times.)
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #8 on: March 20, 2011, 12:37:42 AM »
All 10 dip switches should be off (and the other 6 too).

<eidited> since it is taking bills, just spitting them out, the trasport is probably seated ok.
« Last Edit: March 20, 2011, 12:44:28 AM by poppo » Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #9 on: March 20, 2011, 12:41:02 AM »
all dip swithes are in the off position
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #10 on: March 20, 2011, 12:43:30 AM »
With the set chip did you change the 9-0 to a 9-1? With NO CREDITS on the machine and with a set 15 NOT a set90???
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #11 on: March 20, 2011, 12:45:24 AM »
it may have had credits on the machine, now that you ask
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #12 on: March 20, 2011, 12:46:54 AM »
Quote from: BR549 Auto Sales on March 20, 2011, 12:45:24 AM
it may have had credits on the machine, now that you ask

Do it again!!!! nothing will take with credits on the machine!!!! There you Go !!
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #13 on: March 20, 2011, 12:49:28 AM »
Quote from: coorslight115 on March 20, 2011, 12:43:30 AM
With the set chip did you change the 9-0 to a 9-1? With NO CREDITS on the machine and with a set 15 NOT a set90???

As long as you're going to run through it again, remember: After you set the denomination to 25, be sure to press the white test button to lock in the change before turning off the machine.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #14 on: March 20, 2011, 12:50:34 AM »
I'll try that in a few minutes, thanks
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #15 on: March 20, 2011, 12:52:49 AM »
However he did say it was taking bills, but spitting them back out. If the BV was not enabled, it would not be taking them at all. But he may not have saved the demonination if he powered down after changing it without pressing the self test again.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #16 on: March 20, 2011, 12:54:12 AM »
I wonder if it could be he is using the latest and greatest version of US Currency.

My DBV-200 hates the newer versions.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #17 on: March 20, 2011, 12:55:10 AM »
Quote from: poppo on March 20, 2011, 12:52:49 AM
However he did say it was taking bill, but spitting them back out. If the BV was not enabled, it would not be taking them.

Yes it will take them. He enabled it but it did not know what to do with it because the credits on the machine confused the setup


I went thru this about a year ago and 100 posts to get it straight. Clear, set 15 and no credits fixed it. It took bills all along! but gave them back
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #18 on: March 20, 2011, 12:58:57 AM »
Quote from: coorslight115 on March 20, 2011, 12:55:10 AM
Yes it will take them. He enabled it but it did not know what to do with it because the credits on the machine confused the setup

Huh?  Scratch Head If he was able to enable it, then the machine had no credits. And no it won't take bills at all if dissabled. I just double checked.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #19 on: March 20, 2011, 12:59:29 AM »
Quote from: coorslight115 on March 20, 2011, 12:55:10 AM
Quote from: poppo on March 20, 2011, 12:52:49 AM
However he did say it was taking bill, but spitting them back out. If the BV was not enabled, it would not be taking them.

Yes it will take them. He enabled it but it did not know what to do with it because the credits on the machine confused the setup

 Scratch Head  I've never tried to use a set chip with previous credits on the machine, but since the chip allows the denomination to be changed, I would think that IF it worked, it would also wipe out any previous credits by necessity.


It occurs to me that since he changed the battery, one or more of the basic settings might be preventing the machine from taking bills. Once we've confirmed that he set the denomination to 25¢, he should go through the settings.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #20 on: March 20, 2011, 01:03:03 AM »
Quote from: StatFreak on March 20, 2011, 12:59:29 AM
Scratch Head  I've never tried to use a set chip with previous credits on the machine, but since the chip allows the denomination to be changed, I would think that IF it worked, it would also wipe out any previous credits by necessity.

Good point. The set chip always wipes out the credits. It's some settings in the self that you can't change with credits on the machine.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #21 on: March 20, 2011, 01:03:24 AM »
Well I have heard all this before, Maybe Stat can find the old thread last year where I went thru this. If he comes back and sayes it worked OK....If not next step is a clear then set15. Trust me untill you read the old thread.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #22 on: March 20, 2011, 01:05:35 AM »
Quote from: StatFreak on March 20, 2011, 12:59:29 AM
Once we've confirmed that he set the denomination to 25ยข, he should go through the settings.

Yep. If for some reason the credit limit is 0 it will spit bills back out.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #23 on: March 20, 2011, 01:07:49 AM »
Quote from: coorslight115 on March 20, 2011, 01:03:24 AM
If not next step is a clear ....

Ugh! Clear should be a LAST resort.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #24 on: March 20, 2011, 01:09:04 AM »
Rather than look for the old thread, here is a "saved" post that I have handy in my list of "Quick Replies" Tongue Out
Maybe I should post it in another thread and sticky it?

Stat garfield



Typical home use settings for the SP1271 family of S+ game chips


<EDIT> I posted the information and stickied it for future reference. Click on the above link to go there.
« Last Edit: March 20, 2011, 01:24:55 AM by StatFreak » Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.123 seconds with 20 queries.