IGT I+ 25 pin to 19 pin video adapter?

[Worldwide Gaming]

Does such a beast exist? 

[a69mopar]

All you have to do is change the harness on the machine to whichever you want to use.  I have done this before, switch and all.

Thanks,
Wayne

[Worldwide Gaming]

The harness in the machine I'm assuming...

[a69mopar]

Yes.  In the machine.  You may even be able to modify the existing harness.

W

[TZtech]

Here is the pinout from the Motherboards side.

[Worldwide Gaming]

good karma for those schematics!

[blueridgeslots]

The plugs are a different size, and therefore the shelf is different as well, if you try and put the 19 pin connector in the bracket of a 25 pin shelf (or 25 in a 19) they won't fit

[badbaud]

Here is the pinout from the Motherboards side.

Do you have the pin out for the 25 pin plug?

[doyson]

will this help?

                              19 Pin   25 PIn                                 19 Pin     25 Pin                               19 Pin          25 Pin
Red Video                   2          1                 T/S Rdx            11         12               A Gnd             16              22
Green Video                4          3                 T/STdx             9          13               Earth Gnd         1                7
Blue Video                   3          5                 Mreset              8          14              AC in                19              24
V-Gnd                         7       2,4,6               Netplex Gnd     12         15              AC in                18              25
H-Sync.                       5          8                 Netplex 13 v     10         20 
V-Sync.                       6          9                 + 13 vdc          17         21 

doyle

[badbaud]

Thank you, that is what I needed.

[badbaud]

will this help?

                              19 Pin   25 PIn                                 19 Pin     25 Pin                               19 Pin          25 Pin
Red Video                   2          1                 T/S Rdx            11         12               A Gnd             16              22
Green Video                4          3                 T/STdx             9          13               Earth Gnd         1                7
Blue Video                   3          5                 Mreset              8          14              AC in                19              24
V-Gnd                         7       2,4,6               Netplex Gnd     12         15              AC in                18              25
H-Sync.                       5          8                 Netplex 13 v     10         20 
V-Sync.                       6          9                 + 13 vdc          17         21 

doyle

There is one caveat. The monitor I want to power up is a Ceronix.

So before applying any power I unplugged the machine and turned it on then ohm-ed out the power plug pins to the AC power pins on my test cable and got zero Ohms.

Which meant there was no isolation transformer in the machine - it normally runs with a larger, non Ceronix brand monitor, which apparently had it's AC isolation built into it.

This is why the Ceronix monitor has it's AC power pins in a different location.

Pins 18 and 19 are used for AC power. I'm going to install a isolation transformer and connect pins 18 and 19 of the 19 pin monitor plug to pins 24 and 25 of the machine side connector and put a big red flag on it saying "for Ceronix only - must use isolation transformer".

I'll make a second cable for non-Ceronix monitors (pins 14 & 15 to 24 &25).

[doyson]

note pins 18 and 19 have 250 v ac form 13" game king uprights slant tops Bar top and the 19" uprignt
the 17" games and the 19" slant top are using 120 v ac and the ceronix 17" and 19"  have the isolation transformer in side the monitor
and the lcd monitors don't care will work from 100 to 250 v ac
 
doyle