Welcome, Guest. Please login or register.
November 16, 2024, 01:18:50 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  double jackpot haywire question about reel eproms
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: double jackpot haywire question about reel eproms  (Read 6758 times)
pauvil
Guest
« on: April 12, 2011, 11:12:09 AM »

I have a double jackpot haywire with a 27c64 reel eprom. I picked it up dirt dirt cheap because the  dreaded 62-1 error code comes up. On the cover of the board is written 4/2/05 SS4871. I'm wondering what my options are as far as a new eprom. Could I go with and what would be the benefits ,if any ,if I went with a 256 or 512 chip? Also what are the differences in the ss file numbers? something to do with payouts?

Thanks
Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #1 on: April 12, 2011, 01:42:09 PM »

No benefits in going with the higher capacity eprom, but it's a good way to get around not having the correct capacity eprom.

The different SS numbers reference the fact that the different chips have different payback percentages. Unlike the S2000 which has several different payback percentages, the S+ only has one per SS chip, so to change the percentage you must swap in a different one.
Logged

Thanks,
Bill
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #2 on: April 12, 2011, 03:37:46 PM »

Using a 512 or 256, I would try to stick to the 27c512 if you must pick one.
Either use a offset c000
or use a dos command to make a 64KB file used temporarily

copy /B SSxxxx.bin+SSxxxx.bin+SSxxxx.bin+SSxxxx.bin+SSxxxx.bin+SSxxxx.bin+SSxxxx.bin+SSxxxx.bin SSxxxx-64KB.bin

Then use the resulting 64KB file as the file for your programmer.

Note in case the chip is being used in a S2000 no need for offset or the 64KB file just load and program the file starting at 0000.
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #3 on: April 12, 2011, 04:00:16 PM »

One slight problem you might run into.   SS4871 is the reel chip for Red White & Blue Deluxe 3 coin 85.244%    Silly Me! Silly Me!

What Game chip do you have ??
« Last Edit: April 12, 2011, 04:05:37 PM by Buzz » Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
pauvil
Guest
« Reply #4 on: April 12, 2011, 06:45:52 PM »

Sorry ss4781 and its wiped blank was on a 27c64
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #5 on: April 12, 2011, 07:27:39 PM »

I would suggest post a Pic. of the machine. SS4781 is for a 2 coin Triple Sapphires.   What are the number's on the SP (game) chip?
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
pauvil
Guest
« Reply #6 on: April 12, 2011, 11:19:01 PM »

Sorry my mistake its an ss 4781 on a 27c64. So what would be the reasoning any, for even going with a bigger chip? Also is there any way to tell by the numbers what the payout and what the pay out percentages are. In other words what if so do the numbers stand for if anything.

Thanks
Paul
Logged
pauvil
Guest
« Reply #7 on: April 12, 2011, 11:36:32 PM »

Didn't see the answer about the chip size sorry. Ill check the sp later when I get home sp3842 ig I remember correctly.

Thanks
Paul

Logged
pauvil
Guest
« Reply #8 on: April 13, 2011, 12:04:32 AM »

The chips themselves dont say anything I can barely make out the numbers of the chips as far as the 27c64 goes. They have white tape covering the windows. I'm just going by what is written in marker where the gaming comission tape seal was. The date is 2005 as well. I will check for sure later and let you know. Its a 2 coin double jackpot haywire. 10 mhz board. I will take a pic when I get home later.


Thanks
Paul
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266



« Reply #9 on: April 13, 2011, 12:24:53 AM »

So what would be the reasoning any, for even going with a bigger chip? Thanks
Paul

27C512 chips are generally easier and cheaper to find. And it's easier to manage things if all of your chips are the same (reel and game). Functionally, there is no difference.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266



« Reply #10 on: April 13, 2011, 12:27:00 AM »

Ill check the sp later when I get home sp3842 ig I remember correctly.



You can use the self test to determine exactly what is in there.
http://www.newlifegames.net/spset/SPSS.htm
Logged
pauvil
Guest
« Reply #11 on: April 13, 2011, 02:54:08 AM »

here is a pic of the cover with the writing. I was able to get in touch with one of our members and hes hooking me up with the right chips.
I will be going with these:
Type 2,21
SP1274 Game chip
SS4270 reel chip



* mb.jpg (475.23 KB, 2048x1536 - viewed 287 times.)

* outer cover.jpg (1251.52 KB, 2048x1536 - viewed 315 times.)
« Last Edit: April 13, 2011, 03:01:14 AM by pauvil » Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin


« Reply #12 on: April 13, 2011, 04:54:20 PM »

For what it's worth, trays and chips get swapped a lot.  What's written on a tray doesn't always mean that's what chips are in the sockets.
Logged

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
pauvil
Guest
« Reply #13 on: April 13, 2011, 05:06:13 PM »

That sseems to be the case here. I will be getting my chips soon. Regardless the post was very helpfull as to me gaing a lot of knowlege and some great links to other info. Thanks for all your help guys. We can close this one out.
« Last Edit: April 13, 2011, 10:54:38 PM by knagl » Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266



« Reply #14 on: April 13, 2011, 05:37:52 PM »

What's written on a tray doesn't always mean that's what chips are in the sockets.

As well as the DIP switch settings.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.103 seconds with 21 queries.