bally 6000 error 36

[darckcrane]

replaced a printer in a bally 6000 and the power supply when it came up I tested it and after i hit cashout it came up with a error 36 tried switching printers checked dip switches and wires with the same type of machine and everything looks the same but i cant seem to clear the error and i have never seen this one before can anyone help?

[kenokarz]

make sure you have the paper in the right way, than push and hold the reset button on the mpu board ,for 30 sec release reset close door all should be well
ps make sure machine is on when doing this 

[darckcrane]

checked the paper and tried your suggestion but still did not work after the reset as it goes to cash out and then that error comes back.

[slotsx2]

5-36 is printer failure

[a69mopar]

5-36 is printer failure

The 5x just means that the code shows when the door is open.

replaced a printer in a bally 6000 and the power supply when it came up I tested it and after i hit cashout it came up with a error 36 tried switching printers checked dip switches and wires with the same type of machine and everything looks the same but i cant seem to clear the error and i have never seen this one before can anyone help?

When you say you changed the printer, did you change the entire unit, or just the pull out section.  The ribbon cable or the board at the back can go bad also.

Was the printer working in the other machine?

What mains?

Thanks,
Wayne

[slotsx2]

Thanks for the help with my error 23 there 69!

[a69mopar]

Thanks for the help with my error 23 there 69!

Not sure if you're being sarcastic, however you should tell me what model machine you have.  Hey wait, I see a post, I will reply to.

Thanks,
Wayne

P.S. this thread will be moved to Bally Reel Games.