Welcome, Guest. Please login or register.
November 01, 2024, 01:30:56 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  Need advice on a Triple Play machine Please!
0 Members and 14 Guests are viewing this topic. « previous next »
Pages: 1 ... 3 4 5 [6] 7 8 9 ... 11 Go Down Print
Author Topic: Need advice on a Triple Play machine Please!  (Read 117887 times)
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084



« Reply #125 on: June 24, 2011, 07:43:04 PM »

Wow, I can't believe I missed those two quarters, thanks!  I looked all around with a flashlight and I don't see anymore so hopefully that's it.

Awe, Come on.
There has to be more. I could see those two and I'm a 1,000 miles away. bust gut laughing rotflmao Crazy
Logged

Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #126 on: June 24, 2011, 07:47:55 PM »

That type of board may have a screw holding it in place .. in front at the bottom towards the front of the machine.
Logged
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #127 on: June 24, 2011, 07:53:34 PM »

yea, it was kind of hard to look under where the board was.  Tilted the machine, didn't hear or see anything.  Will take pics.


* coins.JPG (1371.38 KB, 3072x2304 - viewed 415 times.)

* coins2.JPG (1392.15 KB, 3072x2304 - viewed 378 times.)
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #128 on: June 24, 2011, 07:55:07 PM »

more


* coins3.JPG (1282.97 KB, 3072x2304 - viewed 391 times.)

* coins4.JPG (990.76 KB, 3072x2304 - viewed 382 times.)
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #129 on: June 24, 2011, 07:56:44 PM »

LOL Neon, yea but I look with my eyes closed apparently...



* coins5.JPG (944.08 KB, 3072x2304 - viewed 352 times.)
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #130 on: June 24, 2011, 08:04:50 PM »



 rotflmao  rotflmao  rotflmao

Sorry, I know it's an innocent question, but the icon above is what they'll do right before they hang up the phone on you.  Medeco is known for some of the highest security standards.  Even a legitimate locksmith won't go anywhere near that lock without documentation that you're the registered owner of it, despite you having possession of it.

Okay, good news on your board pictures -- the chips that you need to operate the machine are still in there!  (They're the GAME and REEL chips under that red tape.)

Before you put the MPU board back in place, please do as Neonkiss suggested a few posts earlier, and WITH THE POWER UNPLUGGED, remove the stray coins that are still in the machine.  Be sure to check as best as you can under the motherboard (where he underlined in red in the second picture in his post) for coins there, as those can really cause a problem -- perhaps even tilt the machine on its side a little (careful, it's heavy, and the door may try and slam shut on your fingers) to try and free any potential stuck coins.

Oh, also, for your future knowledge, take a look at the MPU board and notice the blue knob at the top of the board that slightly sticks out through the metal tray.  That is the volume control for your machine.  You'll likely want to adjust that in the future once we get your machine up and running.  For now, rotate it gently and you'll feel it won't spin a full 360 degrees -- there are stops at the loudest and quietest (off) settings.  For now, rotate the knob so that it's in the middle of each extreme (a "medium" volume).

Oh crap, I'm glad I mentioned it on here.  I would have felt really stupid if they laughed at me.  You know, before I found this board, I called IGT cause I saw that was on the machine and I was talking to a lady, trying to get her to tell me how to get inside the machine and asking about the power cord and stuff and she was like "UHHhhhhh...do you work for a casino?"  I was like no girl, I'm in my house and I promise it's not stolen!  She said she couldn't help me to call a locksmith and an electrician. haha she prolly thought I was crazy calling her.  I'm glad I found ya'll instead!
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084



« Reply #131 on: June 24, 2011, 08:12:06 PM »

I assume you don't have a voltage meter?
Before you put the MPU back it would be good to test that battery voltage.
If you don't have one, no big deal. The machine is smart enough it SHOULD give you an error code that the battery is low, IF it is.

FYI the attached photo shows the white test button mentioned before. It's hard to find if you don't know what your looking for.
With everything back together and power on that button should give you a credit with every push. That is with the door open.


* test button.JPG (1087.89 KB, 1200x900 - viewed 350 times.)
Logged

Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin


« Reply #132 on: June 24, 2011, 08:25:37 PM »

FYI the attached photo shows the white test button mentioned before. It's hard to find if you don't know what your looking for.

Hmm, that looks familiarTongue Out
Logged

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #133 on: June 24, 2011, 08:32:03 PM »

Yea, the test button doesn't do anything.  There's another button I pressed but I dunno what it's for.  It's in front of the MPU when you open the door.

This is a pic.

Oh, and no voltage meter.  Maybe I need a new battery?


* button.JPG (925.61 KB, 3072x2304 - viewed 371 times.)
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin


« Reply #134 on: June 24, 2011, 08:43:31 PM »

Yea, the test button doesn't do anything.  There's another button I pressed but I dunno what it's for.  It's in front of the MPU when you open the door.


That's the "self test" button for the rest of the machine (I pointed it out in this post).

Without the reels spinning up and you getting some life out of the LED displays on the front of the machine, I wouldn't expect either of the self test buttons to do anything.  You've got a bigger issue going, but we'll figure it out in time.

While you may need a new battery, that's not the only problem you have, and what you've described so far isn't symptomatic of a low battery.  Additionally, as Neonkiss mentioned above, generally you'll get an error code on the LED displays that indicates the battery is low.

Even though the fuses look good visually, it wouldn't hurt to get some replacements and put them in since you don't have a voltmeter to test your current ones.  Sometimes fuses can look good but still be blown.
Logged

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #135 on: June 24, 2011, 09:00:48 PM »

ok well unless I can get someone to go to the store for me tonight to get some new fuses and a meter, I guess we'll have to resume this tomorrow.

*sigh*

All I wanna do is pull the handle lol
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens


« Reply #136 on: June 24, 2011, 11:05:51 PM »

We will make a slot tech out of ya yet!
Logged

** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #137 on: June 24, 2011, 11:58:50 PM »

Okay,
I "looks" like your MPU is okay.
Re-install it with the power "Off".
You've swapped the top and bottom fuses and turned on the power switch right?
Can you tell us what happened ?

As far as I know - there's still no zero in the "Coins Played" window when
the door is opened and the machine is powered up.
In fact, there are no lights lit up on any part or the display panel right?

On the motherboard ( the board you were looking for quarters underneath)
there is a white Molex connector that has 2 green wires, two orange wires, a blue, and red wires.
6 wires are going into that white Molex power connector.
Wiggle that connector a little bit then turn on the power switch.

After you do that, gently feel the 3 reels to see if they are sort of "locked" into "place".
They "can" move if you really want to move them but there should be
some resistance in which they want to stay still.
I need to tell if there is power going to the reels.
If so, then we have to trouble shoot elsewhere.


I'd like you to wiggle the Black connector on the motherboard that has the ribbon cable plugged into it.
That cable is for your bill acceptor and display panel.






* Em's S+ motherboard power Molex.jpg (663.85 KB, 1024x768 - viewed 399 times.)
« Last Edit: June 25, 2011, 12:11:35 AM by stayouttadabunker » Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084



« Reply #138 on: June 25, 2011, 12:06:24 AM »

I think she's OK
Reply 79

OMG you guys, thanks to your directions and those pics I got it all plugged in and I have Power!!!

Well, sort of...When you flick the power switch on, the reels jiggle and place where it says 25 cents lights up!


Logged

Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #139 on: June 25, 2011, 12:13:05 AM »

I think her fuses are okay too Neon.
But without the display, we don't know if she's sitting on a [61] or a [61-x] error code?
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #140 on: June 25, 2011, 12:21:09 AM »

I think her fuses are okay too Neon.
But without the display, we don't know if she's sitting on a [61] or a [61-x] error code?


Mark  I know you know S+ machines, just don't forget there is a molex on the mother board that controls the display. I just spent months trying to figure out my S+ 5 reel with no display. JIM put me on the right path on that one. I told him the problem and right off he said " you have two plugs switch"  he was right.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #141 on: June 25, 2011, 12:31:23 AM »

It's possible Buzz because that darn plug fits two positions on the motherboard.
I don't think they were switched though - do you?
It doesn't appear to me that anyone would have switched it because when it was auctioned off -
all they did was take a pair of pliers and cut the power wires sticking out of the machine!

Let me look at some schematics...I don't have an S+ at hand or nearby at the moment.
I don't have the motherboard layout drawing of all the header connectors here at home...

Add>>>
The only thing I found was the old early S+ manual which shows Em's particular bill acceptor display panel.
All my S+ info is at work...argh!!! >>>

* S+ MPU board layout.pdf (159.32 KB - downloaded 253 times.)
* splus_techadjust.pdf (585.02 KB - downloaded 300 times.)
« Last Edit: June 25, 2011, 01:02:57 AM by stayouttadabunker » Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!


« Reply #142 on: June 25, 2011, 01:52:12 AM »

Am I the only one that thinks that, given the overall condition of the inside of this machine, it would be prudent to actually remove the mother board to check for coins and other contaminants beneath it rather than be satisfied with a flashlight search?

I realize that Emelie is inexperienced, but she now has detailed pictures documenting where the motherboard harnesses are plugged in, and more helpers than Santa Clause a week before xmas. Tongue Out

I'll defer to the group.
Logged

I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #143 on: June 25, 2011, 01:55:49 AM »

She doesn't have to disconnect anything, 3 screws and it will lift high enough to see under it.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens


« Reply #144 on: June 25, 2011, 01:57:47 AM »

I think this thread will break a record 10 pages already
Logged

** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #145 on: June 25, 2011, 02:03:03 AM »

I think this thread will break a record 10 pages already

Allow me to begin Page.11   rotflmao

Stat,
I'm not quite sure anyone wants Em to stick a screwdriver anywhere in there!
She's got two small kids, the hubby's sleeping all the time and
we keep telling her to turn "Off" the power!!!   Tongue Out
Logged
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe


« Reply #146 on: June 25, 2011, 01:46:07 PM »

Great Job so far Emelie!  Clap  Looks like you are well on your way to getting your machine up and running.

Let's summarize what we know so far ...

When the power is turned on: The reels stiffen up and the 25 cent Display illuminates. - This would indicate that the middle fuse is Good, since that allows voltage to the MPU and panel lamps.

You have no LED displays and I am assuming the Top Candle lights are also not working:  This may indicate that you are missing your 24 Volt power supply source.  That source comes through your TOP Fuse.

As Bunker had instructed you to do, you Switched the TOP and BOTTOM Fuse, and nothing different was noticed:  This tells us that the TOP fuse was good. If the Bottom fuse was bad you would not see any signs of Power.

The Fact that you have no Fluorescent Lighting behind the top or bottom glass, could be caused by Bad Starter, Bad/Missing Fluorescent tubes, or Bad power supply - BUT this is not Important right now to get your machine running.

Your next step will be to purchase an in-expensive digital volt meter.

Logged
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #147 on: June 25, 2011, 07:34:09 PM »

I kinda mishandled the fuses after I switched them so I don't know where they originally came from.  I just stuck them in whichever hole when I switched them back. 

I'll get a volt meter.  You get that at a hardware store, right?

I'm not working on my machine today.  Very tired and I think I'm taking the kids to the movies tonight.  Update tomorrow Smiley

Em
Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe


« Reply #148 on: June 25, 2011, 07:58:01 PM »

If you just switched the top and bottom fuses, they are the same value fuse.  You can leave them were they are.

You probably can find a digital Volt meter at a hardware store.  A lot of stores now carry the inexpensive voltmeters.

Radio Shack and Automotive section of many Department stores should also have them.

You should be able to find one for Under $20.   
Logged
emelie
Add me on Facebook!
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Female
Posts: 127



WWW
« Reply #149 on: June 25, 2011, 08:03:17 PM »

Yea it's just the top and bottom ones so I'm still good Smiley

Logged

Feel free to add me on FB Smiley

http://www.facebook.com/#!/profile.php?id=573565049
Pages: 1 ... 3 4 5 [6] 7 8 9 ... 11 Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.101 seconds with 20 queries.