Welcome, Guest. Please login or register.
October 31, 2024, 11:24:50 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  BALLY Game Maker. (Moderator: tacman)
| | |-+  coin comparitor question		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: coin comparitor question  (Read 4176 times)
brianfink
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 348
« on: August 19, 2011, 12:31:14 AM »
My machine has a coin comparitor and no cod board so I set the EEPROM for coin comparitor only and it seems like the coin comparitor is on (green light) when the door is open and off (red light) when the door is closed. So I set the EEPROM for coin comparitor and cod board and it works some of the time (even though there is no cod board) but it has a high rejection rate, and I set the sensitivity as low as possible. Do I just need a new comparitor, or do I need a cod board and new harness, or is there some setting to make it work properly with EEPROM set to coin comparitor only.  The coin comparitor is a model MC-16 R2, 24VDC INHHI, 6.0G The machine is model V7217ST the year is 03

* game maker keno plus 006.jpg (957.66 KB, 1600x1200 - viewed 402 times.)

* game maker keno plus 005.jpg (869.88 KB, 1600x1200 - viewed 386 times.)
« Last Edit: August 19, 2011, 05:45:31 PM by brianfink » Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #1 on: August 19, 2011, 08:13:15 AM »
Type of Gamemaker and comparitor?  And  Please Post Pictures
« Last Edit: August 20, 2011, 05:56:06 AM by StatFreak » Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #2 on: August 19, 2011, 11:37:17 AM »
Quote from: brianfink on August 19, 2011, 12:31:14 AM
My machine has a coin comparitor and no cod board so I set the EEPROM for coin comparitor only and it seems like the coin comparitor is on (green light) when the door is open and off (red light) when the door is closed. So I set the EEPROM for coin comparitor and cod board and it works some of the time (even though there is no cod board) but it has a high rejection rate, and I set the sensitivity as low as possible. Do I just need a new comparitor, or do I need a cod board and new harness, or is there some setting to make it work properly with EEPROM set to coin comparitor only. 
I have a few COD boards around for sale, just PM me.  However try another sample coin to start troubleshooting from there, if there is a coin optic board make sure the coin guide is the right size otherwise it bounces around and misses the optics.
Logged
brianfink
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 348
« Reply #3 on: August 19, 2011, 05:53:12 PM »
I posted picks and model numbers in my original post and I tryed different coins with the same results 
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #4 on: August 19, 2011, 05:59:22 PM »
Quote from: brianfink on August 19, 2011, 05:53:12 PM
I posted picks and model numbers in my original post and I tryed different coins with the same results 
well thats the all in one model, I would try to get another one to replace it.
Logged
azgamingslots
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Posts: 118
« Reply #5 on: November 11, 2011, 10:20:42 AM »
the only time a cod board is necessary is the slant tops with a cc 16 comparator.  .  the uprite 7000 uses a cc62 comparator.
looks like yours is a 7200 using a comparator with internal optics.  no cod board necessary. 
if you are having problems its probably the optics in the bottom of the comparator.
the later sigmas used this type -real pain in the ass.  make sure there is a coin in the reader or it will fail out.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.112 seconds with 20 queries.