Welcome, Guest. Please login or register.
November 23, 2024, 08:41:21 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S2000 Battery Change - Help Needed		 0 Members and 8 Guests are viewing this topic. « previous next »
Pages: 1 [2] 3 Go Down Print
Author Topic: S2000 Battery Change - Help Needed  (Read 20662 times)
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #25 on: September 28, 2011, 09:40:31 PM »
I have to ask this, you didn't by chance switch the base chip for a key chip did you??
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #26 on: September 28, 2011, 09:43:58 PM »
i think you better off picken up another mpu and trying it.......
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #27 on: September 28, 2011, 09:50:36 PM »
Quote from: DJDOOGIE on September 28, 2011, 09:23:13 PM
Ok old battery was reading 2.88 and 2.90 new battery was 3.1 I ran the reset 6 times and now all i get is display netplex link is down.  Frustration...  I wish it would do the same thing it might be easier to fix. lol.  So  I will wait and see what you all think. 

Display netplex down is usually a power supply problem
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #28 on: September 28, 2011, 09:51:35 PM »
I so badly wish that you bad a clear and key chip handy.  Now that we know your battery is good, I personally would attempt a clear and key before buying another MPU.

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #29 on: September 28, 2011, 09:53:17 PM »
One thing for sure, with a 2.8 voltage reading -
the problem was NOT the battery... rotflmao

  I'll bet he has a folded-leg-under-the-eprom syndrome
                                    or
               a pulled out chip socket contact.


I gotta stop *picken* my nose... Cry Laughing
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #30 on: September 28, 2011, 10:10:23 PM »
Well the old saying still is king . Only having one machine and diagnosing the problem a bitch. In my opinion if only one machine is what you have then EXTRA parts need to be gotten . As in   A   key chip  / clear chip / extra power supply / CPU board /  stereo  amp board / reels / assorted buttons / bulbs/ and so on .    Just like having a second machine .    One  thing is for sure  .  Something will fail and then its a bitch with out extra parts to swap out to try   
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #31 on: September 28, 2011, 10:12:42 PM »
 +1 (Karma, or whatever) Agree with Post Agree with Post Agree with Post YOU ROCK!!!

I TOTALLY approve of what you just said...
THAT'S why my walk-in closet has more...uh... *shut*... than clothes in there! lol
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #32 on: September 28, 2011, 10:16:51 PM »
thats very true you need extra parts...... i swapped out so far within a year on my machine,  the mpu board,software chips,speakers,amp,entire bv unit,cashbox,reel strips,backlite reels,and bezel........only thing i didnt replace was the power supply........
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #33 on: September 28, 2011, 10:25:09 PM »
Quote from: staz on September 28, 2011, 10:16:51 PM
thats very true you need extra parts...... i swapped out so far within a year on my machine,  the mpu board,software chips,speakers,amp,entire bv unit,cashbox,reel strips,backlite reels,and bezel........only thing i didnt replace was the power supply........

That's probably next... bust gut laughing

GO shopping right now! young man!  boss
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #34 on: September 28, 2011, 10:27:24 PM »
i no whats next the damm round bulb in my topbox thats gonna be a bitch to replace....... i gotta take everything appart........ hopefully they last a few years lol......
Logged
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #35 on: September 29, 2011, 12:58:11 AM »
Buzz I have no idea what that is.  The guy I bought it off off said he will send me a whole new tray to try next week.  I so need to learn more about this thing.
I need to find a slot owners convention/swap meet to get and know how to use  A   key chip  / clear chip /  pick up an extra power supply / CPU board /  stereo  amp board / reels / assorted buttons / bulbs/ and maybe a glass kit or two so I can change out games.
« Last Edit: September 29, 2011, 01:16:42 AM by DJDOOGIE » Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #36 on: September 29, 2011, 01:12:49 AM »
tray means a mpu.......
Logged
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #37 on: September 29, 2011, 01:20:45 AM »
Quote from: DJDOOGIE on September 29, 2011, 12:58:11 AM
...and maybe a glass kit or two so I can change out games.

Use extreme caution in this arena...especially if you get addicted to things easily or are the least bit OCD.  Smiley

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #38 on: September 29, 2011, 01:26:46 AM »
That's for DA.... SURE!   Cry Laughing
Logged
WGAS!
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #39 on: September 29, 2011, 01:33:51 AM »
DJDOOGIE, I'm not an S2000 expert, but I seem to recall Foster saying that running a Netplex auto-configuration might solve this problem.
I see that he posted earlier in this thread, so perhaps he'll jump in and either confirm my suggestion or correct me.

You said that you had reseated the connectors in your first post, but didn't report the Netplex problem until reply #24. Is it possible that you might have jiggled something loose? You might want to double check the connections again, particularly the Netplex connectors. (Do this with the power OFF.)


I would also suggest trying a clear and key before buying replacement components.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #40 on: September 29, 2011, 01:54:39 AM »
 DJDOOGIE  A clear chip does exactly that clears all errors from the machine. Key chip is needed to reprogram the machine. If you will PM me your address I will send you a set.

I'm still not convinced you have a bad MPU. When your doing what you call a hard clear and it tells you to press the test button for 3 seconds ( it always takes about 6 seconds ) and then close the main door, does the display change to something else ??  When you latch the door, are you sure your getting the latch all the way down to the bottom ??

Boy I forget easy.   Do this, just lift the door latch then close it, ( you don't have to swing the door open ) do this 4 or 5 times
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #41 on: September 29, 2011, 06:00:51 PM »
Doug  I will mail you the clear and key chips this afternoon.

Today I turned on a S 2000 machine ( like yours ) and got a " Net Plex Down " error. ( like your getting ) I thought what the Hell it was working untill I got to switching Base chips around trying to help Joey.  Looking around I found the problem, NO  MPU installed in the machine. This made me think, are you sure you have your board all the way in ??
If it is, pull it back out and inspect all the pins on the back plug and make sure one didn't get bent.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #42 on: September 30, 2011, 12:55:51 AM »
Buzz,
After late last night I went over everything I could touch inside all connectors connected, nothing looked bent, felt loose etc.  Game has been playing great left it on last night and still plays good except taking my money lol.  I turned it off tonight we will see tomorrow how long the gremlins stay away.  Thanks again to everyone that helped. 
Doogie
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #43 on: September 30, 2011, 01:03:03 AM »
Boy I'm supprised, I thought it was still down.  I am glad it's working but please tell all of us what you did to get it working.   Clap Clap Clap
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #44 on: September 30, 2011, 01:10:50 AM »
Looks like my IGT voodoo dance worked out for you!  Wink

Glad she's running!

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #45 on: September 30, 2011, 02:12:02 AM »
I didn't do anything magical I just made sure things were tight opening the door numerous times (I didn't know all I had to do was unlatch it) asked WTF alot with no reply from the machine or the dog.  I didn't find anything loose but it works and it usually does for a little while no specific time or nuber of spins. I will turn it on when I go for my run in the morning and see if it works when I get back. 
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #46 on: September 30, 2011, 02:53:16 AM »
I should have explaned, opening the latch and closing it clears one error and only one at a time. That was the reason for asking you to do it 4 or 5 times.  If you have more than one error they stack on top of each other.

Good work 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #47 on: October 01, 2011, 12:53:47 AM »
Good to know thank you.  it is still working too  yay.
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #48 on: October 04, 2011, 03:24:44 PM »
Buzz got the chips.  Thank you so far all is well not one error and this is the longest the game was played with out an error so they worked.  I sent you a PM too.
Doogie
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #49 on: October 04, 2011, 04:36:50 PM »
Quote from: DJDOOGIE on October 04, 2011, 03:24:44 PM
Buzz got the chips.  Thank you so far all is well not one error and this is the longest the game was played with out an error so they worked.  I sent you a PM too.
Doogie


Doug  "Your welcome"
 
 If that's you in your avatar, and I think it is, your more than welcome to just about anything I have.  Having spent 8 years in the service I know the BS you have to put up with.   Soapbox Alert
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Pages: 1 [2] 3 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.127 seconds with 20 queries.