Welcome, Guest. Please login or register.
October 14, 2024, 10:48:54 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  NLG Members who host their own Repair Logs of Various Games.
| |-+  Channelmaniac's Arcadecomponents' Old School Repair Logs (Moderator: channelmaniac)
| | |-+  Midway Games
0 Members and 4 Guests are viewing this topic. « previous next »
Pages: 1 ... 4 5 6 [7] Go Down Print
Author Topic: Midway Games  (Read 159888 times)
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #150 on: August 07, 2013, 09:27:48 PM »

Model: Galaga
Symptom: Dead. Garbage on screen

Replaced all 24/28/40/42 pin sockets on the CPU and video boards. Replaced all the old style resistor packs on the video board. Installed new interconnect cable and replaced a bad 74LS245 on the video board. Repaired 2 broken traces on the video board. Tested. Recapped the audio section and replaced the 2 470uf power filter caps. Retested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #151 on: August 10, 2013, 01:53:51 AM »

Model: Galaga
Symptom: Missing player/text graphics

Fixed 3 broken pins on the 54xx, 1 ea. on 2 of the 8xx chips. 1 trace on the 51xx chip where the socket was replaced by 2 old single wipe cut down sockets. The CPU sockets were dual wipe and OK. Replaced the 28 and 42 pin sockets and all the old style resistor packs. It booted with a ROM 03 error. Pulled the ROM at 3L out of the socket and fixed a bent pin. Replaced the 24 pin sockets to finish the CPU board.

Replaced the 24/28 pin sockets and the old style resistor packs on the video board. Fixed a broken pin on the 00xx and 05xx chips. Fixed a bad trace on the 1K resistor pack. Tested the boardset and found the sound for the player ship being captured by the enemy was incorrect. Replaced mismatched sound ROM at 3E and retested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #152 on: October 03, 2013, 03:00:50 AM »

Model: Pac Man
Symptom: Graphic Corruption

Socket on 5F was previously replaced.

Found 3 damaged traces on 5F. Jumpered traces and tested. Graphics were better but still slightly corrupt. Removed socket from 5F, removed damaged trace causing short, and reinstalled socket. Tested. Sound was corrupt. Replaced bad 74LS86 at 4F and retested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #153 on: October 03, 2013, 03:02:46 AM »

Model: Pac Man
Symptom: Dead

Fixed 3 broken solder joints on the Sync Buss Controller board. Game would boot the Six Pac mod, but had graphic corruption. Replaced bad CPU and retested. The upper address lines were not working correctly and bank switching was failing.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #154 on: October 17, 2013, 03:26:35 AM »

Model: Mortal Kombat
Symptom: Low audio

Cleaned under a leaky 220uf cap on the audio board, recapped the audio board, and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #155 on: October 17, 2013, 03:27:26 AM »

Model: Mortal Kombat
Symptom: Crackling and low audio

Cleaned under the leaking 100uf and 220uf caps on the audio board, recapped the audio board, and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #156 on: October 17, 2013, 03:28:26 AM »

Model: Mortal Kombat
Symptom: Low audio until board warms up

Cleaned under the leaking 220uf cap on the audio board, recapped the audio board, and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #157 on: October 17, 2013, 03:29:34 AM »

Model: Mortal Kombat
Symptom: Low and crackling audio

Cleaned under 3 220uf, 1 2200uf, and 5 100uf caps that were leaking on the audio board. Recapped the audio board and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #158 on: October 17, 2013, 03:30:11 AM »

Model: Pac Man
Symptom: Burnt edge connector

Repaired the edge connector with copper tape and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #159 on: October 20, 2013, 10:43:58 PM »

Model: Ms Pac Man
Symptom: Burnt edge connector

Repaired edge connector with copper trace tape. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #160 on: October 20, 2013, 10:44:58 PM »

Model: Ms. Pac Man
Symptom: Dead

Replaced missing Z80 Sync Buss Controller module and the 28 pin socket in mounts to. Replaced a bad 74LS283 in the sound circuit. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #161 on: October 20, 2013, 10:45:43 PM »

Model: Carnevil
Symptom: No sync.

Replaced bad 7407 IC and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #162 on: October 26, 2013, 02:50:06 AM »

Model: Rampage World Tour
Symptom: Random errors that change with board flexing

Reflowed U1, U13, U24, U25, U32, U33, U36, U37, U38, U39, U65, and U66. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #163 on: October 26, 2013, 02:50:49 AM »

Model: NBA Hangtime
Symptom: Bad background noise in audio

Replaced bad TL092 OpAmp at U92. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #164 on: October 27, 2013, 01:26:36 AM »

Model: Galaga
Symptom: Freezes, randomly coins up by itself.

Board has had repair attempts before. All the 2147 RAMs were pulled and 2x 2148 RAMs installed by another tech.

Replaced all the 24, 28, 40, and 42 pin sockets. Replaced all the old style resistor packs. Found a 2.2K pack that had a broken pin causing the freezes and a 5 pin 1K pack with 2 broken pins causing color issues that the previous tech replaced the RAM for. Recapped the board. Repaired bad pin on the 52xx causing the coinup issues. Repaired a bad pin on the 04XX chip. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #165 on: October 27, 2013, 08:04:29 PM »

Model: Galaga
Symptom: Freezes and resets on its own

Board had been worked on in the past by another tech.

Replaced the 24, 28, and 40 pin sockets on the CPU board. The resistor packs were of the proper type and the remaining sockets were machine pin and did not need replacing. Found all of the 24 pin sockets on the EPROMs were incorrectly installed, standing off the board about 1/16", and two of them had pins that had broken off under the socket causing the bad behavior. Tested board.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #166 on: October 28, 2013, 11:02:02 PM »

Model: Rampage World Tour
Symptom: Graphical Corruption during game

Board had stripes and bleeding colors throughout playfield and outside of the playfield around the screen borders.

Replaced U32, U10, U11, U14, U15, U38, and U75. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #167 on: December 30, 2013, 12:46:07 AM »

Model: Mortal Kombat 4
Symptom: No sync, burned component.

Rebuilt burnt traces and pads, replaced a burnt 0 ohm resistor in the video ground circuit, and replaced a missing surface mount capacitor. Tested board. Replaced bad surface mount 7407 IC to fix missing sync. Retested to find sync fixed but some buttons not working. Cleaned JAMMA edge connector and tested board again.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Pages: 1 ... 4 5 6 [7] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.076 seconds with 20 queries.