WAMM -IPC Setup

[RICKF]

Hello

I'm new at programing a IGT 2000.  I have a S2000 built in 2002 with a 75510502  Processor board, stepper chip SB100227, Game chips SG000362 with a version chip of VS011GX1.

The machine worked before i started going through the programing setup.  I was trying another processor board and game. I used the key reset.  now i get a message  of WAMM or IPC.  Iwent into 7.1 key chip setup.  WAMM-IPC setup 7.1.4.1 WAMM-IPC version and Get Version UNKOWN. 

My question is: Do I need to install the key chip to make changes to version?  If so, is the correct key chip 45?

Thanks

[Foster]

You need to pick WAMM in 7.1.4

I would get a set of SG000363 or 598 You wont have to worry about picking WAMM or IPC again
if you have  key 31 use it, otherwise the 45 will do.

[RICKF]

Still having problems when using the key 45. I ordered a IVC00097 clear chip.  I also took your sugestion and ordered a set of SG000363 chips. I will eventually get a KEY 31 Chip.   Is there any difference between the SG000362 and SG000363 chip set?

Thanks again for the help

[Foster]

When I used the 362 these are the things that I hated:
1: Every time I changed the game I had to use a key chip and configure my progressive.
2: If a clear was done had to pick WAMM in 7.1.4

Installed the 363 never have to fix either one when I change a game.

I hope I never have to clear my machine again. I have to go through every part of 7.1, 7.2, and 7.3.1, 7.3.3, the only key menu I do not check or change is 7.3.2

Here is the SG000363 PSR

[RICKF]

Is there a list of what SG chips work with what Stepper base chips?

Thanks again Rick

[Foster]

There are some SB chips (themes) that require specific SG chips.
If the theme is a general theme: Double Diamond, Red White & Blue, Haywire, etc) 363 or 598 will do just fine.

[RICKF]

Hi

I changed the SG000362 to SG000363 and got rid of the problem

Thanks again