Welcome, Guest. Please login or register.
October 09, 2024, 01:21:27 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  NLG Members who host their own Repair Logs of Various Games.
| |-+  Channelmaniac's Arcadecomponents' Old School Repair Logs (Moderator: channelmaniac)
| | |-+  Capcom CPS1 / CPS2 Games
0 Members and 2 Guests are viewing this topic. « previous next »
Pages: 1 2 [3] Go Down Print
Author Topic: Capcom CPS1 / CPS2 Games  (Read 103366 times)
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #50 on: February 11, 2012, 04:13:36 AM »

Model: X-Men vs. Street Fighter
Symptom: RAM Error

The RAM error would follow the cart and not the A board. Replaced bad Object RAM (64K surface mount) at location 3A and 4A on the cartridge board. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #51 on: February 24, 2012, 06:11:41 AM »

Model: King of Dragons
Symptom: Corrupt video

Board had sparkles and lines on the screen. If pin 24 on the Video RAM from P1 through P7 was touched the screen would go crazy with sparkles and dots. Removed corrosion on pins 41 and 42 of 2H on the A board and jumpered the two traces to the chip's solder pads. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #52 on: March 08, 2012, 02:16:01 AM »

Model: Captain Commando
Symptom: Dead. Has physical damage

Replaced 1 broken 20 pin socket, 1 broken ferrite filter, and 1 missing PAL on the C board. Replaced 2 broken 4.7k resistor packs on the C board, straightened the kick harness connectors, then modified the C board to run with phoenix ROMs. Replaced 1 broken ferrite filter on the B board. Installed phoenix ROMs and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #53 on: March 08, 2012, 02:17:36 AM »

Model: 3 Wonders
Symptom: Garbage on screen. Locks up.

Replaced bad A board to fix graphic corruption. Modified the C board and installed phoenix ROMs to fix lockup/crashes. Tested by playing all three games to the end.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #54 on: March 08, 2012, 02:18:22 AM »

Model: Punisher
Symptom: Dead

Modified C board and QSound board to work with phoenix ROMs. Installed phoenix ROMs and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #55 on: March 08, 2012, 02:19:18 AM »

Model: Knights of the Round
Symptom: Dead

Modified C board to work with phoenix ROMs. Installed phoenix ROMs and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #56 on: April 14, 2012, 09:39:51 PM »

Model: D&D 2 Shadow over Mystara
Symptom: Dead

Removed battery from board. Reprogrammed EPROMs with the Phoenix code. Game crashes. ROM10 was too slow and was replaced with a 120ns EPROM. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #57 on: April 22, 2012, 12:01:25 AM »

Model: 3 Wonders
Symptom: No sound

Jumpered burnt trace under the Z80 sound chip. Replaced bad sound program ROM. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #58 on: August 21, 2012, 04:50:16 PM »

Model: Final Fight
Symptom: Graphic corruption

Game had flashing sprites for some characters and objects.

C board was missing a signal on pin 41. Traced it back to a bad trace on the A board. Repaired trace and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #59 on: August 29, 2012, 03:48:54 AM »

Model: Cadillacs and Dinosaurs
Symptom: Dead

Board had suicided. Modified the C board and QSound board. Replaced 2 ROMs on the ROM board and one on the QSound board with phoenix code. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #60 on: December 28, 2012, 04:52:17 AM »

Model: Super Street Fighter II Turbo
Symptom: Dead

A/B board set came from a local auction buy. Battery was rolling around inside cart.

Removed ROMs 3-8, erased them, and reprogrammed them with suicide free code. Board booted but had distorted sound and incorrect graphics. Programmed and installed missing BGSG1 PAL on daughter board. Reset improper jumpers JP10 through JP29 and board booted with proper sound and graphics. Tested game.

NOTES: BGSG1 PAL controls sound ROM decoding. BGSG2 PAL controls graphic ROM decoding. Board appears to have been a swap where someone was attempting to fix another cartridge. That's the only explanation I could think of for all the incorrect jumper settings and the missing PAL.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #61 on: December 28, 2012, 05:48:02 AM »

Model: 1944
Symptom: Dead. Blue Screen.

Erased ROM 3 and reprogrammed it with suicide free code. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #62 on: September 17, 2013, 02:41:34 AM »

Model: Dungeons and Dragons: Tower of Doom
Symptom: Dead

Reprogrammed ROMs 3, 4, 5, and 7 with suicide free code, and ROM 6 with European region code. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #63 on: September 18, 2013, 11:12:51 AM »

Model: The Punisher
Symptom: Dead

Removed batteries from the C board and Q sound board. Modified both boards to use phoenix code and replaced the necessary EPROMs with faster ones using the phoenix code. Tested.

NOTE: Do not use any non-AMD EPROM slower than 150ns and AMD EPROM slower than 120ns when phoenixing CPS1 or CPS1.5 games as they will experience random crashes.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #64 on: September 18, 2013, 11:13:35 AM »

Model: Captain Commando
Symptom: Dead

Removed battery and modified C board to use the phoenix code. Reprogrammed 2 EPROMs with phoenix code and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Pages: 1 2 [3] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.092 seconds with 20 queries.