Welcome, Guest. Please login or register.
March 28, 2024, 10:57:21 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Monitor Repair Log and Database. **Arcade and Gaming**
| |-+  Monitor Repair Tech Support
| | |-+  Tatung 14428 No Power -- Help
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Tatung 14428 No Power -- Help  (Read 3525 times)
jthelman
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 26



« on: March 12, 2013, 06:55:50 PM »

I have a Tatung 14428 monitor that I changed out the chassis and yoke board.  It came on when powered up but made a arcing noise and then stop, picture looked good.  I left the power on for a few hours and everything is working great.  I came back about an hour later and saw a black screen.  Read on a post to replace c106 and c109 capacitors.  It didn't  help and there's not static when I put my arm next to the screen.  Checked fuse on chassis board and okay also checked 110v where the monitor is connected to and is okay .  Anything else that I can check?
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #1 on: March 12, 2013, 07:58:50 PM »

Check the horiz output trans for 130v at the center leg. Also check it for short, center leg to each outside leg
Logged
jthelman
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 26



« Reply #2 on: March 12, 2013, 08:21:30 PM »

Not sure where the horiz trans is or how to check,  I do have volt meter and have some soldering skills.
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130



« Reply #3 on: March 12, 2013, 08:29:03 PM »

Could be a bad flyback transformer.
Logged

One step at a time.
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #4 on: March 12, 2013, 08:47:57 PM »

Horiz output trans, or HOT,  is a large 3 leg transistor mounted to a heatsink right next to the flyback transformer. Common operating voltage is 130vdc measured center leg to ground
Logged
jthelman
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 26



« Reply #5 on: March 12, 2013, 08:59:50 PM »

Thanks for all of the great information, I'll check it out tomorrow.
Logged
jthelman
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 26



« Reply #6 on: March 13, 2013, 09:48:03 AM »

Okay before I start.  I can not test the monitor while it's in the machine, is this what I need to do.   
1.  Take out monitor out of the machine.
2.  Apply 110v power to the chassis board.
3.  Check the horiz output trans for 130v at the center leg.
4.  Also check it for short, center leg to each outside leg
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #7 on: March 13, 2013, 10:26:08 AM »

That would be MY first move. Are you sure you are getting the 110v supply to the monitor from the machine in the first place?
Logged
jthelman
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 26



« Reply #8 on: March 14, 2013, 09:08:45 AM »

Yes, I'm getting 110v to the monitor.  I do have another chassis board that isn't working screen is white, that's why I purchased is other chassis board that lasted 5 to 6 hours and then no power.  Would the board with the white screen be easier to repair?  I'm out of town and won't be able look at the boards until this weekend.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 20 queries.