Going crazy trying to set accounting denom on S2000 cant do it.

[cowboygames]

Try it once more from scratch and when you get there, clear both succesive errors with the jackpot rest key. They will show up back to back after you put the SB chip back in post clear. Then you should be able to key it normally.

[SLOTMAN]

Ok, GOT IT!!! First I want to thank everyone for their help.  I believe the problem was somewhere in the coin handling, I was able to reseat the connector and then set the denomination.

Buzz: Your technique of going directly to key chip from the clear chip without putting in the SB chip also worked like a champ.  I did clear, key and after the inital reboot it went right to key chip config

[cowboygames]

Good job slotman! Hell of a way to spend a Saturday though

[brianfink]

when you do a key 97 it should clear your denoms and machine type. If you are not using a printer and you are only using one denom you should not even need to do a key 17. just try to do your key 97 when you get to machine type mismatch go to key chip config and set accounting denom coin denom and machine type. after you close the door all errors should go away and unless you want to set up a printer or multi denoms or game selection. after the machine is up and running with no errors you can do a key 17 at any point as long as you dont have any credits or errors on the machine.