Welcome, Guest. Please login or register.
November 22, 2024, 05:29:21 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  bally 5500 ram clear chips		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: bally 5500 ram clear chips  (Read 14491 times)
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« on: March 31, 2012, 06:51:18 PM »
where can i purchase these chips?? thanx budmannick
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #1 on: March 31, 2012, 09:11:07 PM »
For the S5500 or the V5500 Chips ?
Logged
One step at a time.
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #2 on: March 31, 2012, 09:52:33 PM »
hi the s5500 for a slot sorry.. budmannick
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #3 on: March 31, 2012, 10:01:38 PM »
http://rudysdeals.com/index.php?route=product/product&path=66&product_id=154
Logged
One step at a time.
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #4 on: April 11, 2012, 07:49:51 PM »
ok purchased ram clear chips that i didn't need(have 920000 series e-proms). set the jumper for ram clear on bottom right corner of board installed board held puesdo coin and reset in and powered up held for approx. 2 mins.. nothing.. no lamp flash.. when i released the buttons i have 83f code. question 1 is there a different process to do a ram clear?? and if not who can i get to service or replace this board. the battery is new. thanx budmannick
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #5 on: April 11, 2012, 08:40:30 PM »
Redo the clear

SafeRAM Clear Procedure

Complete - Press and hold the PSEUDO COIN and
TEST buttons, then switch power ON. When the message
CH C displays in WIN PAID, release the PSEUDO COIN and
TEST buttons. The CH C message is followed by CL C.
Full - Press and hold the PSEUDO COIN button, then
switch power ON. When the message CH F appears in
WIN PAID, release the PSEUDO COIN button. The CH F
message is followed by CL
Partial - Switch power ON. The message CH P
displays in WIN PAID. The CH P message is followed by
CL P.
If an error was detected during SafeRAM Clear
as designated by E C, E F, E P in WIN PAID, repeat the
operation.
« Last Edit: April 24, 2012, 08:58:46 PM by proten » Logged
One step at a time.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #6 on: April 11, 2012, 09:29:08 PM »
one little hint when you press the Pesudo and test bottons, press them hard enough for your finger tips start hurting then press  a little harder. then turn the power on. I've been known to put on a glove.
« Last Edit: April 12, 2012, 01:14:41 PM by Buzz » Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Mr. Dinoman
Mr. Dinoman
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 542
« Reply #7 on: April 12, 2012, 01:09:29 PM »
Did you try using your original mains?...What happened with those or are you using the purchased clear chips?...If both are doing the same thing, you have other problems...
Jimmy
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #8 on: April 23, 2012, 12:34:51 PM »
ok i have tried all the clear procedures with the original mains in place. complete reset shows nothing until i release the buttons then i get the 83f code. full reset shows CH F when i release the pseudo coin i get 83 F.  partial shows 83 F when i turn power on. all this with original mains and safe ram jumper in place?? thanx budmannick
Logged
Mr. Dinoman
Mr. Dinoman
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 542
« Reply #9 on: April 23, 2012, 01:03:35 PM »
Can you post a photo of you MPU board and a close-up of your mains... Please Post Pictures
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #10 on: April 23, 2012, 01:13:18 PM »
i will try to get pictures this afternoon. thanx budmannick
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #11 on: April 24, 2012, 06:49:26 PM »
heres the pics thanx budmannick

* pic 1 (1).JPG (982.22 KB, 2048x1536 - viewed 674 times.)

* pic 1 (2).JPG (970.83 KB, 2048x1536 - viewed 711 times.)
Logged
Mr. Dinoman
Mr. Dinoman
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 542
« Reply #12 on: April 24, 2012, 07:11:34 PM »
Did you check your battery voltage?
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #13 on: April 24, 2012, 07:39:25 PM »
why yes i did.. new battery 3.6 volt. i removed the battery jumper while it is just setting around. i put it back when i try something else..  thanx budmannick


















































volt
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #14 on: April 24, 2012, 07:55:23 PM »
With the 920000 installed, move the jumper to both post and turn the power on, without pressing the Pesudo and test buttons   see if it will do a partial clear. If it does your not holding the two buttons in hard enough for a full clear.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #15 on: April 24, 2012, 08:52:03 PM »
it will not clear. did a complete, full, and partial with same results. thanx budmannick
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #16 on: April 24, 2012, 09:04:13 PM »
use a ohm meter to check that the Pesudo and test buttons are working.
Logged
One step at a time.
Mr. Dinoman
Mr. Dinoman
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 542
« Reply #17 on: April 24, 2012, 10:06:45 PM »
You must leave the battery jumper on in order to do a Ram Clear and keep it on...As soon as you remove the battery jumper and turn the machine off you will get the 83f error...
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #18 on: April 25, 2012, 12:43:44 PM »
hi again checked both switches and they are fine. i only remove the battery jumper when the board is just sitting around waiting to try the next step. this machine was brought to me by a guy who bought it not working.. was told the battery was replaced but they couldn't get it to boot up 3 yrs ago. so i know very little about it. so here i am thanx again budmannick
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #19 on: April 26, 2012, 06:42:27 PM »
sooo who repairs the 5500 series slot boards or has a replacement board?? thanx budmannick
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #20 on: April 26, 2012, 07:00:09 PM »
I think I have a replacement board.
I'll put a fresh battery in a board and check it out.

One thing I would check on your board is the solder connection to the battery.
The traces are very weak on those boards and after several battery change they sometime break.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #21 on: April 26, 2012, 07:28:16 PM »
i will check that tomorrow. i cut the leads on old battery and soldered to them to the new battery, but i will look at it tomorrow. thanx budmannick ps i believe the board is recognizing the battery because if i put the board in without the battery jumper on the display shows an 81 code, with jumper on 83F????????????
Logged
budmannick
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 18
« Reply #22 on: April 30, 2012, 04:29:14 PM »
hi guys i checked my rams and have the battery voltage on both rams. does anyone service these boards? or any other suggestions?? thanx budmannick ph 330 904 4319
Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #23 on: April 30, 2012, 09:03:42 PM »
I have a few 5500 boards but check with lemans1969 first.  I know she has a pretty good stock
Logged
GEMINIS02
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 9
« Reply #24 on: May 01, 2012, 01:38:18 PM »

good morning SLOTMAN

I also I have a problem with bally 5500 to notify the SAS system.

could help with the version SE 960000.

sorry for my English

thanks.

GEMINIS02
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.093 seconds with 20 queries.