Bally 1090 slot, reel wiring.

[duvaloutlaw]

Hello everybody, Can anyone help me with a wiring schematic for the beau plugs on the reel unit. I have a few broke wires that need identification. I  am working on replacing  the male and female on the 18 pin side, the 24 pin side just needs cleaning. the broke wires are behind in the cab behind the reels. Thanks. I have just joined but been a lurker for a while now.

[Amachanic]

There is a person on EBay that sells wiring schematics for Bally slots. The other place to check would be Foxsslots. You can find a link to his EBay store on the home page under sponcers.

Gary

[duvaloutlaw]

Thanks, I'm going to check those out.

[FOXSSLOTS1]

love to sell wire diagrams but all you have to do is look at the wiring on the female plugs.

[Amachanic]

Duh...    Thanks Barry

[duvaloutlaw]

there were a few broke stragglers near the plug that i cant find where they were connected. I'm going to try to post a few pics of my problems,,thanks. no rush, i'm super grateful to just have people to bounce things off of. thanks again guys

[duvaloutlaw]

the project,

[duvaloutlaw]

I'm working on the new cabinet beau plug now, i can transfer all but about three from the old connector and i will post whats left. the number 8 wire in the wall strip is missing too. the reel plug came out great.

[duvaloutlaw]

in progress, one wire at a time and the finished plug.

[duvaloutlaw]

the update; the plugs work now and the reel unit can be taken in and out as needed....whats different now, the music plays now, the tilt light is on, it will coin in and spin and play music. the coin acc light does not come on, and the coil on the lock out arm has no power, its not froze and still moves nicely with no burn marks. but no power.

can anyone help with the lock out coil on the arm mech, or the tilt light?

thanks, Bruce. -sorry for the cell phone pics they are a lil blurry at times-

[duvaloutlaw]

It's up and running, pays out, all three multipliers work. there are still a few loose wires that need to be traced and figured out. and a few minor problems like the light. there were two broke wires on the coin hopper and a reel beau plug was replaced....lotsa cleaning and a lil bit of oiling. then bang, she was back. ill post a few update pics later today.