Welcome, Guest. Please login or register.
November 22, 2024, 07:56:47 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally 5500 to 6000 Conversion		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 5500 to 6000 Conversion  (Read 2758 times)
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« on: February 02, 2009, 04:32:08 PM »
Does anyone know if a Bally 5500 can be converted into a 6000 - Aside from the physical differences can the MPU be changed or does it require much more like motherboard and wiring??
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #1 on: April 12, 2010, 02:24:39 AM »
Munch, I know it's been a year, but as long as I'm here, the short answer to your question is that the MPU board is the same for both slots. It's the back plane board and all of the harnesses that are different. The 5500 also has a reel deck, where the 6000 just has a bar in front and in back and the reels hang over an empty hole. The dbv is mounted in a different location as well and the bezel is in the door, not next to the reels.




Wayne, thanks for the heads-up.


Moved to Bally Reel Slots board. garfield
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Laredo
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 29
« Reply #2 on: April 12, 2010, 04:32:24 PM »
Quote from: jdkmunch on February 02, 2009, 04:32:08 PM
Does anyone know if a Bally 5500 can be converted into a 6000 - Aside from the physical differences can the MPU be changed or does it require much more like motherboard and wiring??

I believe that the SMI chips are the same for both.  However the base chips are different sizes.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.096 seconds with 20 queries.