Welcome, Guest. Please login or register.
October 31, 2024, 11:00:36 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT M Slot Reel Games
| | |-+  IGT "M" "Tilt Call Attendant" displaying on Three reel Slot		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: IGT "M" "Tilt Call Attendant" displaying on Three reel Slot  (Read 17745 times)
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« on: September 26, 2012, 02:16:30 PM »
Hi All,
I have a IGT "S" Three Reel slot from around early/mid 1980's that is malfunctioning. Coins are just returned to hopper when inserted, and the message coming up is "Tilt Call Attendant" Can anyone please advise what is wrong and how to correct?
Thank You Very Much!!
--Johnny J.
Logged
Mirage_Chaser
NLG Member 101 to 500 Post
***

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 233
« Reply #1 on: September 26, 2012, 02:24:08 PM »
Could you post a picture of the machine in the error?
Logged
I want to win by winning... (J. Lemos)
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« Reply #2 on: September 26, 2012, 02:36:08 PM »
 ok thank you. here it is attached.

* IMG01232-20120921-1032.jpg (625.58 KB, 2048x1536 - viewed 733 times.)
Logged
Mirage_Chaser
NLG Member 101 to 500 Post
***

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 233
« Reply #3 on: September 26, 2012, 02:41:26 PM »
It does not appear to be on in this picture. I would like to know what shows on the small displays when the machine is in the error.
Logged
I want to win by winning... (J. Lemos)
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #4 on: September 26, 2012, 02:42:45 PM »
I do not think that is a S machine   Scratch Head  but I have been wrong before.
Logged
leapyearguy
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 226
« Reply #5 on: September 26, 2012, 02:47:45 PM »
this is an M slot.
Logged
20 bucks for simple repairs, 30 if you watch, and 50 if you open your mouth.
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #6 on: September 26, 2012, 02:49:53 PM »
Quote from: leapyearguy on September 26, 2012, 02:47:45 PM
this is an M slot.
Thats what I thought
Logged
Mirage_Chaser
NLG Member 101 to 500 Post
***

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 233
« Reply #7 on: September 26, 2012, 02:50:53 PM »
M slot? Never heard of them. Are they predecessors to the S series?
Logged
I want to win by winning... (J. Lemos)
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #8 on: September 26, 2012, 02:51:50 PM »
Quote from: Mirage_Chaser on September 26, 2012, 02:50:53 PM
M slot? Never heard of them. Are they predecessors to the S series?
Yes, they were before the S
Logged
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« Reply #9 on: September 26, 2012, 02:52:05 PM »
\Sorry, I am confused. thought was S...it says inside that it is IGT Model 1633C.....program RS644.....and theres a sticker that refers to "S" model
If you want I can take pic of the display closer
Thanks everyone - maybe I can get somewhere finally!!!
Logged
Mirage_Chaser
NLG Member 101 to 500 Post
***

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 233
« Reply #10 on: September 26, 2012, 03:08:32 PM »
I just really want to know what the display says. The ones that normally display the credits and wins. But I probably will not be much help as I don't know anything about the "M" machines.
Logged
I want to win by winning... (J. Lemos)
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #11 on: September 26, 2012, 04:30:12 PM »
I have the manual for the M...


John check your email... You've Got Mail You've Got Mail
« Last Edit: September 26, 2012, 04:42:51 PM by coorslight115 » Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #12 on: September 26, 2012, 04:40:09 PM »
While the message is displayed, turn the jackpot reset key and read the message again, it should change to the cause.
Logged
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« Reply #13 on: September 27, 2012, 01:13:08 PM »
coorslight:
Thanks so much - I have the manual and will try to resolve, that was very much appreciated!
I truly appreciate everyone else's attempt to help me. Especially for a guy like me who flunked shop in High School and has trouble beyond identifying a hammer and a screwdriver. .
Thanks again everyone!! 
-John
Logged
jbshocks
NLG Member 101 to 500 Post
***

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 463
« Reply #14 on: September 27, 2012, 02:30:32 PM »
If you check page 4-2 of the manual you will see a diagram of the cam shaft.  This cam shaft spins over on start up to reset the kickers.  On 4-5 you will see a cam follower.  These all rot and fall apart.  If yours has the machine won't reset the kicker and can not fire to spin the reels.  These followers are no longer available but there are options.  Many guys buy a set of bally hopper bearings to replace them.  That is what I did on my M+.  On my M model I just turned some new plastic rollers on my lathe. So basically any roller of the right size will work. Do you hear anything at start up?  I am wondering if the cam is ever turning.  If the rollers are ok and the kickers are resetting and firing the reels it is possible that they are not  firing hard enough.  In this case clean and lightly lube the the kickers.  You may also need to remove the reel shaft and lightly lube the bearings if the reels are moving slow.  If you can determine the error message it will help point you in the right direction.
Logged
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« Reply #15 on: September 27, 2012, 02:39:53 PM »
jbshocks:
Thanks so much for that detailed explanation and the pic - nice machine! I'll get on this today; I agree that I need to first see the message that displays after turning the reset button. I greatly appreciate your info!
John
Logged
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« Reply #16 on: September 27, 2012, 06:22:55 PM »
uh oh..........i was looking for the "reset" and discovered I dont have the key..........................any suggestions??

thanks everyone!!!
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #17 on: September 27, 2012, 06:42:41 PM »
Quote from: JOHNNYRES on September 27, 2012, 06:22:55 PM
uh oh..........i was looking for the "reset" and discovered I dont have the key..........................any suggestions??

thanks everyone!!!

PM me your address and I will send you one.
Logged
jbshocks
NLG Member 101 to 500 Post
***

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 463
« Reply #18 on: September 27, 2012, 06:46:22 PM »
while waiting for a key you can short the wires on the reset switch to get the codes.
Logged
JOHNNYRES
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 9
« Reply #19 on: September 27, 2012, 07:11:12 PM »
Coorslight:  i just emailed my address/number to you- THANKS!!
jbshocks: Thanks, but with the lack of knowledge I have i will probably blow up the machine or electrocute myself; thank you anyway!

This is a great site!
Logged
Chuck_shelby
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 4
« Reply #20 on: September 27, 2013, 11:23:23 PM »
I just got an m machine. It has the call attendant tilt message on it. I reset it and it goes away for awhile.  I'm also missing the led display. It came on for awhile and then went away. I'm also looking for a manual.

Thanks for any assistance.
Logged
Chuck_shelby
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 4
« Reply #21 on: September 27, 2013, 11:27:26 PM »
I think I have the possibility of getting more of the m series that don't work. Would this be a good idea for spare parts?
Logged
Tilt
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 366
Offline Offline

Gender: Male
Posts: 724
« Reply #22 on: September 27, 2013, 11:45:19 PM »
 NLG Welcome  I emailed you a manual to the address in your profile.  These machines frequently have problems with the rollers on the reel kickers deteriorating that will cause reel tilts.  Read through the M-slot section and you'll see quite a bit of information about them.  If you can get another M-slot for the right price it might be worth it to pick one up for parts.  You don't see a lot of parts for these older machines around too much anymore.
Logged
Chuck_shelby
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 4
« Reply #23 on: October 01, 2013, 12:04:29 AM »
The manual looks great.  Do you known if  keys ar standard across all slots. Still haven't  got a key. They are trying to find them. They do have a key in a similar m slot.
Logged
dsagal79
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 7
« Reply #24 on: November 18, 2013, 11:10:27 PM »
C
Quote from: coorslight115 on September 26, 2012, 04:30:12 PM
I have the manual for the M...


John check your email... You've Got Mail You've Got Mail

Can you send me the manual?  I just bought one and when I got it home I got the same message.

Thanks in advance!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 20 queries.