Welcome, Guest. Please login or register.
November 07, 2024, 01:18:10 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  NLG Members who host their own Repair Logs of Various Games.
| |-+  Channelmaniac's Arcadecomponents' Old School Repair Logs (Moderator: channelmaniac)
| | |-+  Data East Games
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Data East Games  (Read 16244 times)
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« on: September 16, 2008, 12:23:19 AM »

Fixed: Captain America:
Symptom: Dead, missing parts.

Replaced 2 missing proms with ones pulled from parts Capt America board. Moved over 7 EPROMs from the parts board and burned an EPROM to replace the missing 8th. Fixed a short on the bottom of the board. CPU would not come up. Checked the reset line - it was being held high and never cycled from low to high to have the CPU boot normally. Traced it back and replaced a broken capacitor to fix the board.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #1 on: September 16, 2008, 12:23:34 AM »

Fixed: Robocop:
Symptoms: Dead

Replaced 6 missing EPROMs, installed 2 20-pin sockets and 2 74als245 ICs. Still dead. Found and replaced a bad 20 pin socket on the ROM board. Board now booted but had corrupt background and foreground graphics. Did a physical inspection of the board and found bent pins on one of the graphics processors. Fixed the bent pins on graphics processor IC to fix the background graphics. Found and fixed three burnt traces under the 74LS157 ICs to fix the character/foreground graphics and finish the game.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #2 on: September 16, 2008, 12:23:52 AM »

Fixed: Fighters History Dynamite
Symptom: Dead

A physical inspection revealed 2 gouged traces on the board. Repaired the traces and tested the game.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #3 on: September 16, 2008, 12:24:28 AM »

Fixed: Mutant Fighter
Symptom: Dead

A physical inspection turned up a hit on the bottom board that has pushed the solder on 2 plate throughs together to where they shorted. Dabbed a bit of rosin flux on the lump and used the soldering iron to unbridge them. Game booted but had no audio. Replaced the broken volume control pot (one leg had come loose from the pot) to finish the repair.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #4 on: July 18, 2009, 04:35:50 AM »

Model: Wizard Fire (Dark Seal II)
Symptom: Scrambled sounds

Board was randomly playing incorrect sounds. Resoldered the 2 OKI 6295 sound chips and a 74LS283 IC then tested the game.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #5 on: June 07, 2010, 07:56:04 PM »

Model: Captain America
Symptom: Dead

Board was dead. No power. Replaced 3 broken power filters next to the JAMMA connector and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #6 on: March 04, 2012, 10:41:44 PM »

Model: Captain America
Symptom: Graphic Corruption on player/enemy

One address line was missing on the ROM at C17 and the clock signal on pin 11 was missing on the LS373s at A20 and A12. Cleaned a liquid spill and repaired 2 bad traces and 1 bad plated thru hole under the ROM at C17. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #7 on: March 30, 2012, 07:30:17 PM »

Model: Captain America
Symptom: Dead. Missing parts.

Board was a parts board being resurrected. Replaced 3 missing PALs and 8 missing EPROMs with ones from another parts board. Board still dead. Replaced a missing 5 pin 1k resistor network and resoldered a partially removed one. Board would then boot but had graphic corruption between player/enemy and backgrounds. It also played incorrect sounds.

Fixed bent/shorted pins between the character ROMs and the background ROMs to fix the graphic issue. Resoldered the 75 chip to fix the incorrect sound issue. Installed 2 missing 9 pin 1k resistor networks for player 3/4 controls. Tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #8 on: November 12, 2012, 09:20:41 PM »

Model: Chain Reaction
Symptom: Corrupt Graphics

Patched corroded trace on daughter board and tested.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.087 seconds with 21 queries.