Welcome, Guest. Please login or register.
June 28, 2017, 04:32:09 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  NLG Members who host their own Repair Logs of Various Games.
| |-+  Channelmaniac's Arcadecomponents' Old School Repair Logs (Moderator: channelmaniac)
| | |-+  Universal Arcade Games
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Universal Arcade Games  (Read 1590 times)
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2127


Few things are better than fixing an old game...


WWW
« on: December 02, 2012, 12:44:01 PM »

Model: Mr. Do's Castle
Symptom: Upgrade to NVRAM

Removed and reprogrammed ROMs 1 through 4 with the JROK code for adding the High Save Score feature. Removed 1 SRAM and replaced it with a socket and a customer supplied DS1220 NVRAM chip.

Board would not boot with the DS1220 in the socket. Installed a 9 pin 470 ohm resistor pack to tie the first 8 address lines high and tested successfully with the DS1220 in the socket.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2127


Few things are better than fixing an old game...


WWW
« Reply #1 on: January 01, 2013, 05:20:53 PM »

Model: Mr. Do
Symptom: No sync

Board had been modified to put separate H and V sync out. Removed 2 jumper wires and resoldered two cut chip pins to remove mod. Tested. board.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2127


Few things are better than fixing an old game...


WWW
« Reply #2 on: January 04, 2013, 04:17:04 PM »

Model: Cosmic Avenger
Symptom: Will not coin up

Boardset requires +5v on the coin inputs when idle and is detailed in the owner's manual wiring diagram. Either wire +5v straight to the switches or simply use a 1K ohm resistor on each coin switch input on the PC board to tie the inputs to +5v.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2017


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.09 seconds with 21 queries.