need help with mustang

[StatFreak]

grrob24
« on: May 02, 2007, 07:01:49 PM »   

--------------------------------------------------------------------------------
 I have a univesial mustang from 1994.It reads error code 62 off-line error.I will take any help I can get or someone that can work on them close to Indy.
Thanks

uniman
« Reply #7 on: May 25, 2008, 09:13:42 AM »   

--------------------------------------------------------------------------------
Recently found out that error 62, off-line error, is a loss of communication between the mpu and the bonus game. First thing I would
check is the battery on the bonus game board.
-better late than never-

[StatFreak]

uniman
« Reply #1 on: October 12, 2007, 02:58:12 PM »   

--------------------------------------------------------------------------------
I looked at this Universal Mustang yesterday. Heard about them, never seen one before.
This machine is in excellent shape and very clean.
It has the 8800 board of which I have absolutley no information.
It also has pashinko style reel strips, LED bonus round that consists of three 1's, 2's, and 3's. You need to match all of the same number to win bonus.
Saw it on Craigslist. The guy wants $950.00 for it.

[gordy]

1. shut off.    2. in the upper unit there are 2 bds  an upper and a lower. on the back left corner of the lower bd are 2 buttons   The inner one is marked "All Clear"  Press it down for 15 sec.and continue to hold it down while turning on the machine. Keep holding it for 5 sec.  3. Release the button. The display should say "ram clear end ", but the" tilt" still comes up and the hatefull "62".     4.Shut off. Slide hopper out and put finger into the hole going into the CPU. Press in the button in the hole. Hold that button and turn on machine. now take finger off button.   5. Put hopper back in. Mach. should work. Sometimes takes several tries.  Gordy   610 687 2282