WTS ~ TITO @ Home has arrived

[bhinkley]

Yes you can.  The board does not "void" the tickets, so they are re-usable until they wear out.

[slotsx2]

I have a stack of tickets. Sometimes they work, sometimes that SAME ticket will NOT work....

[bhinkley]

I have a stack of tickets. Sometimes they work, sometimes that SAME ticket will NOT work....

It still sounds like your bill validator is an issue.  If the tickets are working at all the system is functioning.

[FORDSBS]

 

[slotsx2]

I took a bill validator out of one of my Alphas, same thing!!
Also, I can sit and put 20 after 20, 10 after 10, 50 after 50 and not ONE spits back out! I also can put one ticket or money in, and cashout. Then I can put another ticket or bill in, cash out and get a hand pay the second time!

[bhinkley]

As I discussed on the phone with you though, some bill validator heads are very picky with tickets.  I suggest getting a head that has been tested working with tickets to see if that resolves your issues.

[slotsx2]

The bill validator out of my Alpha works PERFECTLY! It's the SAME MODEL as the one in my S6000!

[slotsx2]

OK, heres my delimna ....
I put the TITO in my S2000 which works PERFECTLY without the TITO installed!
My S2000 has an enhanced Board with an Enhanced sound simm..... Have others had success with the TITO and an S2000 using the enhanced MPU?
I set ALL settings per the piece of paper I received. Here's where I stand!

If I press Cashout, it displays the following looped message, "PRESS CASHOUT FOR HANDPAY, SORRY, THE PRINTER IS NOT AVAILABLE, PRESS PLAY MAX CREDITS TO CANCEL"
I did a 4.7.2 Printer test and it printed a blank ticket as it should! If I push cashout again, if does a handpay!

I am using Key 45 and Clear 224 with the following checksums - Key 45 000A0BD7CHKSUM, Clear 224 002968DDCHKSUM

Thanks,
JR

[bhinkley]

I have tested and sold boards that I have personally installed on the enhanced MPU following the exact instructions that were sent with your boards, and they function fine right out of the gate.

[Foster]

I have an enhanced mpu and my own TITO, progressive and player tracking system and it works great
you have to set it for System Validation
Disable Bally Miser to free up Channel 3 and set SAS primary to channel 3 and address 001
also the other SAS settings cashless, progressive, etc , etc set to primary.

[FORDSBS]

99% of the time it's operator error.

[rickhunter]

I have one running right now with it.  Enhanced board with 5 reel led. 

[slotsx2]

7.1.3.5 System Bonus Legacy
7.1.5   SAS Aft Controller
7.2.1.1 SAS Validation Type - System Mode
7.2.2.1 Printer Enabled
7.2.3.1 Voucher Redemption - SAS
7.2.3.2 Voucher Limit Follows Credit Limit
7.2.4.1 Remote Handpay Reset Enabled
7.2.5   Coinless Mode Disabled/Enabled - Tried both ways, same results, same error message!
3.1.4   Field Locked In Coinless Mode.....
        
        Credit Limit  100000
        Jackpot Limit 100000
        Bill Limit    3000

3.4.1.1.1  SAS Address - 001
3.4.1.1.2  SAS Channel - 3
3.4.2.2    Bally Miser Channel - OFF

[Styx]

We had a machine that would do a perfect test ticket, but hand pay every time. It was the machine settings that had the asset number and serial number reversed. It needed a ram clear to correct the settings.

Not likely the issue here, but thought I'd throw it out there. Check all the info on the test ticket and see if anything is not quite right.

-Styx

[Foster]

Asset number and serial number do not matter in system validation,
I would change 7.1.5 to SAS EFT (it should not matter, but it might fix it)
System validation does not even use the serial number or asset number to function, it only needs the ticket number and amount

[Styx]

So is it a different system when it's a home machine? We have advantage in ours on the floor, and I think it was because the advantage numbers did not match those of the machine. The advantage numbers were correct in our case, the error was in the machine settings.

I'm not familiar with the way it works with home machines, but I am curious to know.

-Styx

[bhinkley]

Home machines are actual machines that used to be in casinos.  We just use a more simple version of the protocol and validation settings to communicate, but if you unplugged a machine in a casino from the mainframe and plugged my board in it would work if the settings were changed to match what I use.

[Styx]

So because you use a simpler version of settings, not everything is in play like asset and serial numbers etc? Good to know. I imagine it must also be a much simpler communication system too, since it's not connected to advantage, a bank, or floor?

I'd make some wisecrack about how there must be WAY fewer error codes to deal with, but I'd like to keep the karma I already have. My smart ass is 

-Styx

[bhinkley]

You are correct.  Much fewer error codes because most commands are just ignored.  The board simply looks for the commands related only to the TITO and ignores everything else, with the exception of the free credits by hitting the change button.

[FORDSBS]

Get them before sale goes off. Here's Brian's post.

For anyone that has not bought, or is looking to buy more....  Here is an opprotunity you cannot pass up.

There has been a change effective immediately to pricing on TITO @ Home.  Now the cables are included with the board for the same low price (a savings of $5-10 per board depending on what type of machine you are running the board in).  This means you get the board and all the cables you need to run it for the low price of $45.

I will also be offering custom free credit amounts.  You pick the amount (choose between 500, 1000, 2000, 5000, or 10000 credits per button press for the feature when you have it enabled)

Now for the deal you just can't pass up....

From tomorrow (9/13/13) until the end of October (10/31/13) all orders will get 10% off the purchase price.  This is a special spooktacular sale going on to clear out some boards and get more in to get ready to go simply because I love Halloween so why not have a sale.   applause

To purchase all you have to do is send me a personal message letting me know how many boards, and what platform they are for (IGT S2000, IGAME, Bally s6000, Bally Alpha, Bally Evo, Bluebird) and also what state they would be getting shipped to.  As I have officially started a business with my state all sales to Minnesota residents sadly I have to charge sales tax on, but all others I am still free to not charge tax.  Once you send the info I will respond to you with how much the total including priority mail shipping with tracking number is (it is just a flat rate $6 shipping anywhere in the continental USA).

[bhinkley]

Get them before sale goes off. Here's Brian's post.

For anyone that has not bought, or is looking to buy more....  Here is an opprotunity you cannot pass up.

There has been a change effective immediately to pricing on TITO @ Home.  Now the cables are included with the board for the same low price (a savings of $5-10 per board depending on what type of machine you are running the board in).  This means you get the board and all the cables you need to run it for the low price of $45.

I will also be offering custom free credit amounts.  You pick the amount (choose between 500, 1000, 2000, 5000, or 10000 credits per button press for the feature when you have it enabled)

Now for the deal you just can't pass up....

From tomorrow (9/13/13) until the end of October (10/31/13) all orders will get 10% off the purchase price.  This is a special spooktacular sale going on to clear out some boards and get more in to get ready to go simply because I love Halloween so why not have a sale.   applause

To purchase all you have to do is send me a personal message letting me know how many boards, and what platform they are for (IGT S2000, IGAME, Bally s6000, Bally Alpha, Bally Evo, Bluebird) and also what state they would be getting shipped to.  As I have officially started a business with my state all sales to Minnesota residents sadly I have to charge sales tax on, but all others I am still free to not charge tax.  Once you send the info I will respond to you with how much the total including priority mail shipping with tracking number is (it is just a flat rate $6 shipping anywhere in the continental USA).

Only 10 days left on this sale!!  It is a great buy.  Now is your chance to get the TITO @ Hone for the lowest price of the year.  There won't be a price this low again for a long time.  I still have 38 boards complete and ready to ship as of the time of this posting and parts on the way for a bunch more.  On 11/1 the price goes back up to $45 each board.  I will still include the cables in the price of the board for now, but that could change if the price of those parts goes back up, so now is the best time to get your boards ordered while I can offer the rock bottom pricing.

[slotman357]

These are not TITO with two boards that are Velcro's together are they? If not, do you supply step by step instructions on the set up. Is there any more price break for multi orders.

[bhinkley]

These are not TITO with two boards that are Velcro's together are they? If not, do you supply step by step instructions on the set up. Is there any more price break for multi orders.

They are a single board.  No Velcro involved.  They do come with instructions for all machines that are fully supported.  Yes there is a price break for multiple board orders.  10% off orders once you order the 5th board.

[FORDSBS]

I got 4 more last week & just ordered 4 more. SALE WILL SOON BE OVER!!!!!!

[FORDSBS]

Thanks Bob. Got my other 4 today.