WTS ~ TITO @ Home has arrived

[staz]

Right side top in your picture

i see it...thanks..... do i hook up board before the clear or after?

[FORDSBS]

open door
push white test button until 11 comes in win paid
push max bet- every time it will show you setting
27-26- etc.    credit window will have setting

[staz]

open door
push white test button until 11 comes in win paid
push max bet- every time it will show you setting
27-26- etc.    credit window will have setting

thanks will do that and mark everything down to brians sheet he sent me and see if theres anything different before i do the full clear.......getting back to my progressive will i loose it after full clear or will it remember the value?

[FORDSBS]

It should remember progressive

[staz]

what are the specific settings to enable my printer and have tito work?? i went through all my settings and marked them if they were different from the  sheet i got with the board....sorry for all the stupid questions but im learning lol....

[FORDSBS]

The ones you will be changing are
50hi
50 lo
78 hi
78 lo
73
92
98
19 lo
17

[FORDSBS]

what are the specific settings to enable my printer and have tito work?? i went through all my settings and marked them if they were different from the  sheet i got with the board....sorry for all the stupid questions but im learning lol....

61-2 if printer & no hopper
81-0

You do have 2004 or newer mains in?

[staz]

The ones you will be changing are
50hi
50 lo
78 hi
78 lo
73
92
98
19 lo
17

so all the above i will change to whatever the sheet says correct?

[FORDSBS]

Correct. To set the 78 hi you have to go thru all settings & push max bet until it comes around again then you can enter the 1

All other settings set to whatever was on machine before.

[staz]

what are the specific settings to enable my printer and have tito work?? i went through all my settings and marked them if they were different from the  sheet i got with the board....sorry for all the stupid questions but im learning lol....

61-2 if printer & no hopper
81-0

You do have 2004 or newer mains in?

i have mains that came with the board..... my mains in there now is older wont let me enable printer..... now that im changing out the mains will progressive still be stored??

[FORDSBS]

progressive should still work. If you put wrong settings in you'll have to clear to change.
I run stay in mains in all of mine. That way you don't have to change chips all the time.

[staz]

progressive should still work. If you put wrong settings in you'll have to clear to change.
I run stay in mains in all of mine. That way you don't have to change chips all the time.

the mains he sent me are stay in mains with a #6 dip switch change...... those should work.....

[FORDSBS]

progressive should still work. If you put wrong settings in you'll have to clear to change.
I run stay in mains in all of mine. That way you don't have to change chips all the time.

the mains he sent me are stay in mains with a #6 dip switch change...... those should work.....

# 6 or #8??  To clear you move 8 to on. After clear 8 to off

[staz]

i will tackle this tomm..... thanks again for your help.....   it doesnt look to hard now that im getting familier with it.....next project after i get this working is  how do you get tickets to say stuff on them with a bally? i bet anything it ant easy as a s2000 lol....

[FORDSBS]

2000 is easier. On 6000 I don't bother putting on ticket. It's in the manual how to do it.

[staz]

progressive should still work. If you put wrong settings in you'll have to clear to change.
I run stay in mains in all of mine. That way you don't have to change chips all the time.

the mains he sent me are stay in mains with a #6 dip switch change...... those should work.....

# 6 or #8??  To clear you move 8 to on. After clear 8 to off

its #8 not 6.....i need glasses lol

[bhinkley]

Great news for everyone wanting TITO @ Home or wanting more.  I have found a supplier that can get me a good price on some cheaper parts, so there will be a Black Friday sale this year.  For the Friday after thanksgiving only, boards will be sold for $8 off the regular price ($37 for the board and cable set).  I will be out of town that day, but any order that comes in during that day my time will be honored at that price.  Even if I run out of inventory during the sale (which I don't think I will as I have close to 100 boards on hand right now) I will still honor the price if you place your order during the sale.

[FORDSBS]

  for having Black Friday sale. Looks like I'll have to get another order ready for then.    for giving a good deal.

[Gunnerbill]

Will there be a TITO for the Aristocrat MK6

[proten]

Ill take 2 if they will work on the MK6.

[Gunnerbill]

I have 2 TITO I need to wire up, I need the wiring diagrams for the setup of a Bally Alpha S9000 and for a IGT 3902 (I-Game). Any help please, Thank you

[Tilt]

Bill,

See this post for the Bally Alpha pinouts.

http://newlifegames.net/nlg/index.php?topic=22509.msg181897#msg181897

[TZtech]

Proten/Gunnerbill

Aristocrats talk a proprietary protocol called ASP - to talk SAS a SPC2 board is converted which essentially translates from the one language to the other.
Do your machines have SPC2 boards ?

[Gunnerbill]

@TZtech= yes, Both my MK6 have an SPC board. What else do I need? Anything special with the setup. If I remember right, In Config, and under SPC I have to make it a one or something like that?
@ Tilt = Thank you for the Picture and Wiring Diagram for the Bally. (K+) What is the wiring diagram for the IGT 3902

[TZtech]

Bill - You will need the correct connector to fit the SPC2 board and then we need to figure out where to get power from.
Then it should simply be a case of optioning machine correctly.

Maybe BHinkley will consider a discount to anyone willing to test and document new machines/manufacturers