Welcome, Guest. Please login or register.
September 28, 2024, 09:15:16 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  IGT I-Game and Game King.
| | |-+  Hold button on my gk is "weak"		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Hold button on my gk is "weak"  (Read 2970 times)
vpguy
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Posts: 26
« on: March 20, 2013, 07:20:50 PM »
Out of the 5 "hold" buttons the first one often does not register when hit and can take a few tries. This is pretty classic and I find this a lot in the casinos. Can be really annoying, especially when you are losing bawling

There are 5 buttons above the hold buttons that aren't used. I was wondering if I can swap one of those in place.

The bad button doesn't stick, it's action is fine I just think the micro switch has seen its day. I'm thinking I can just swap it for one of the unused buttons and all will be fine. Make sense?

Thanks

Vpguy
Logged
uniman
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830
« Reply #1 on: March 20, 2013, 08:48:17 PM »
I think that would work. Swap it out with the CHANGE button microswitch.

Nothing more annoying than sticky/faulty hold buttons!! hissy fit
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #2 on: March 20, 2013, 09:08:29 PM »
And make sure you swap the existing bad switches wires to the new switch. Sounds obvious, but people do sometimes forget. New switches can be had for a few bucks if you post a wanted to buy ad here in the classifieds
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #3 on: March 20, 2013, 10:32:30 PM »
One of two things, the feet on the white part of the switch gets worn where it presses on the micro switch, or the micro switch has poor contacts inside of it. A drop of super blue on the feet will build it back up so it will push on the micro switch ( LET SUPER GLUE HARDEN BEFORE REASSEMBLEY ) Or replace micro switch.

One other thing, the lower part of those switches just push up in place, make sure it's pushed up all the way. ( I may be overloading my A$$, I'm assuming they are original IGT switches )
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
azgamingslots
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Posts: 118
« Reply #4 on: April 24, 2013, 09:24:14 PM »
i swapped out the #73 bulbs with led lamps,  looked great, however the led bulbs were longer and hampered the operation of the switch,
to fix situation, i pulled them and ground off the magnifying tip of the leds with angle grinder, works fine now.
Logged
uniman
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830
« Reply #5 on: April 24, 2013, 09:33:46 PM »
 
Quote from: azgamingslots on April 24, 2013, 09:24:14 PM
i swapped out the #73 bulbs with led lamps,  looked great, however the led bulbs were longer and hampered the operation of the switch,
to fix situation, i pulled them and ground off the magnifying tip of the leds with angle grinder, works fine now.

Way to Macgyver it!

For you younger members, look it up!  rotflmao

* macgyver.jpg (32.61 KB, 366x280 - viewed 196 times.)
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 19 queries.