Conflicting Bally ID tag

[MarkInAz]

Looking over this recent acquisition(by my neighbor) we noticed this ID tag.  We know it’s a Bally machine so why the IGT tag also?  

[stayouttadabunker]

The two companies were actually in cahoots with each other until the "BIG FALLOUT"...
Bally didn't like the way IGT put their big blue metal tags partially covered over the little black Bally tags?

[FOXSSLOTS1]

IGT used to take anything in trade - then refurbish and resell - hence the igt tag.

[Op-Bell]

IGT used to take anything in trade - then refurbish and resell - hence the igt tag.

As demonstrated by the 1981 date on the Bally tag, and 1988 on the IGT.

I'm pretty sure the companies were not friendly in 1988. That was the period of IGT's most aggressive rise and they were driving Bally bankrupt. They were probably refurbishing machines mainly to deny Bally new sales.

[MarkInAz]

Thanks & happy karma to all.  What do you think of my neighbors machine?  $50 bucks.  I think his wife is less than happy with me since introducing him to the joys of slot machine refurb.  We still have to fix the hopper controll board, bad triac I think.  Its a cool machine, cant wait to see the mechanical digital display fire up.  I hope we don't have to wait for a jack-pot to get an output from it.  Any ideas? 
Question- both triacs were shorted but the fuse didn't blow.  That shouldn't happen.  That fuse should have popped when the power switch was flipped on by the looks of the E-1000 schematic.  When I replace those two triacs I think I'll cut open the factory installed jumper in the S-1 position in case the disable signal is stuck high from the MPU.  Any ideas or advice on that circuit?

[Op-Bell]

$50 was a steal, even with the cracked glass.

I can't quite make out the display technology. Is it mechanical seven-segment? Whatever it is, it's very unusual. There's an active collectors community for old obsolete displays - I'd hazard a guess that they're worth considerably more than he paid for the slot.

[MarkInAz]

It lives again    The digits are a progressive, its so cool.   

[Op-Bell]

Mechanical seven segment displays, very cool! Do they stay when the power goes off, or do they reset to blank?

I would not be very pleased to win 14 cents for three triple bars    There must be a keyswitch to set up the jackpot reset value.

[StatFreak]

What a grand old machine.
Even with the crack in the glass it looks classy.
I'm pretty sure that I've seen that type of digital display before in a Bally EM in a slot shop that sold mostly EM machines back in 1995.

[stayouttadabunker]

I think I've seen those displays in old pinball machines?

[jay]

Arn't they a florescent or similar gas tube... in a 7 segment display.

[MarkInAz]

They remind me of the old "digital" alarm clocks from the 70's.  These ones are 7-segments, but electromechanical.  The individuals segments of the digits are flipped into view by small solenoids I think.  We found that after killing power the digits remain visible.  When power is reapplied the "counting" resumes from the last point.  We now have the jackpot all the way up to $1.23   

Ya know, the glass in this machine IS in great shape.  That "crack" must be a reflection from something in the background.