how do you install new software in a avp2.0 6.0gk to a 6.2 gk

[lencinas]

can someone give me instructions please thank you

[4 Deuces]

Hi lencinas,

You will need ...
1)  GK 6.2 license USB - this is most important or you won't be able to play your game.
2)  The 6.2 software on either USB or CD-ROM.
3)  Key 28 software (this should be included with the 6.2 software).
4)  eKey USB for accessing the menu to choose the 6.2 software and key 28.
5)  A six-pin jumper (you can use three 2-pin jumpers) to allow the hard drive to be written to.

Once you get all of these, then there are instructions here ...
http://newlifegames.net/nlg/index.php?topic=24980.msg194133#msg194133

   WARNING: Do NOT attempt erasing or clearing anything until you verify you have valid license.  It's possible to clear your machine and not be able to restore your games without the proper keys or licenses.

Hope this helps.  :Dave

[4 Deuces]

Just realized the other topic of clearing RAM and EEPROM so you can configure an existing game.

To install a new game (doing this from my failing memory) ...
1)  Turn off machine.
2)  Insert the GK6.2 disc or USB drive in one of the slots on the backplane located on the left side of the cabinet.
3)  Insert eKey in brain box.
4)  Insert six-pin jumper in brain box (or three 2-pin jumpers stacked).
5)  Turn on the machine.  You will be prompted to install.  The machine will install the new software and associated key 28.
6)  You will be prompted to remove eKey, installation media and write-enabled jumpers.  Remove and turn off machine.

Now you can follow the instructions at ...
http://newlifegames.net/nlg/index.php?topic=24980.msg194133#msg194133

NOTE: DO NOT ATTEMPT THIS UNTIL YOU KNOW FOR SURE YOU HAVE A LICENSE KEY.

:Dave