Looking for help with Bally e-2000 series machine

[Amachanic]

Being its Military, don't they have an extra reset key on the right side of the cabinet that had to be used to clear or reset some problems? I had one years ago, but don't remember that much about it.. All I remember was that is was different then the regular 2000 machines.

Gary

[dhellis]

Being its Military, don't they have an extra reset key on the right side of the cabinet that had to be used to clear or reset some problems? I had one years ago, but don't remember that much about it.. All I remember was that is was different then the regular 2000 machines.

Gary

OK, so is the defective machine a Military model? The subject says E-2000 and I thought the Military models are K models (K-610 etc..) I could be wrong because I have never seen a Military model.

[FOXSSLOTS1]

the military machines have unique MPU unique P1 m1 m2 and m3 and unique IO board - so you cannot swap out boards from a non-military.  The military users manual tells how to do tests a little differently than reg e-series.  With a blown hopper board - there could be residual damage to IO and possibly the mpu

[satelliteman]

In light of Barry's most recent comments, it sounds as though this is beyond my capabilities.  It appears this machine will be returned to a dark corner & scavenged for parts in the future.  Doesn't pay to stick any more money into a machine few people care to play.  Everyone wants to play the newer stuff with all the bells & whistles.
Thanks to all for your input in trying to resurrect this machine.  We tried.