igt wild cheery Slant tops dbv problems

[Jim]

compare the cash out switch wiring against one another, it is different from all the rest of the switches,  I'm hoping one of them is different, if not then the only other problem that would cause the 8-2 not to change would be the bill acceptor not enabled. But you said it does accept money.   

Jim

[topperrz]

yes it trakes money  took forever  had to disable # 10 switch  but that was suppose to be for 022   and the dbv that was in it was an 022 but did nothing when i had # 10 switch on

[rickhunter]

I think I got it.  Set mpu board switch #4 to off (the switches on the board in the tray).  I think earlier you said you had it to "on".  If you set it to "on" you cannot change 8 2.  Try it.

From the PSR:

If DIP switch 4 is on, the bills-to-hopper option is automatically enabled and all inserted bills are paid from the hopper, regardless of the game's credit type.  If DIP switch 4 is off, the operator can specify in self test how inserted bills are paid.  Payment can follow the player-initiated credit type, it can be set to override the game's credit type and always pay cash only, or it can be set to override the player-initiated credit type and always pay credits only.

the later on it says:

Bill Acceptor
Pay Mode <0> [8]   This option can be changed only if DIP switch 4 is off.  Changes to this option are ignored when the credit type is noncredit.  The options are pay coins from the hopper {2}, convert bills to credits {1}, or follow the player-initiated credit {0}.  If set to follow the player-initiated credit, bills are converted to credits if the player has selected the credit mode, or paid from the hopper if the player has selected the noncredit mode.

[topperrz]

let me try that and also  I can put the DBV 200 # 10 switch on or off and it takes the bills

[topperrz]

First off I want to thank everyone for there input and help i have the DBV 200 in the 5c WC machine and it is now working as i turned off number 3 switch on MB and it now goes to credits instead of payout as i was able to change it off 82  it works in machine with # 10 on or off   so that 1 has me a little baffled then the 145 should have worked also  the 145  does work in the 2C machine though  also the bottom light on the candle is now working once i turned 7-0  to disable drop drawer as it had no sensor on door  so didn't recognize to begin with   now  the only thing left is i still have the transporter frame with the harness in it and wires are broke away from connector  what is this used for and do i need it and if i do   does anyone here have it for sale so i can get these machines finished and also want to put DBV 200 back into 2C  and rid the 145 altogether

thanks
Mike

[knagl]

Are they two little orange wires that are broken?  If so, and we're talking about the same thing, those are the wires for the LED lights in the bill validator bezel (the plastic that is usually red or yellow and says something like, "insert bills $1 to $100").  The LEDs are supposed to light up when the validator is enabled and ready to accept a bill (ie. the machine is idle, not in a tilt condition, and not at the credit limit).  They're not necessary to have (it will work without it), but it's nice as it's how the machine would have worked in the casino, and it also helps for troubleshooting of bill validator issues.

[topperrz]

No that wire comes from the DBV itself and hooks up inside where the power supply is behind front glass. the harness I am referring to actually sits in the framing where you slide the DBV Transporter in   2 wires go to 1 side  2 wires go to other side on bottom of framing comes up the back side and plugs into the right side of the transporter right next to where plug goes into the DBV on Rt side   and wire actually feeds down below where you slide cash box into

[topperrz]

I see which it is now  it is the harness for the 2 sensors that tells machine that the cashbox is in place underneath the DBV Transporter but the ends that came loose are the ones right above cashbox and next to the DBV yellow orange red Brown

[topperrz]

Does nobody here have the wire harness that connects to the cashbox optics as mine broke away from connectors  and also looking for a good deal on the DBV 200  I have eveything else working thanks to all the helpo in here