WTB FRONT DOOR DECAL FOR IGT S-PLUS

[pinballmike49]

WANT TO PURCHASE THE FRONT DOOR STICKER FOR A UPRIGHT IGT S-PLUS. THIS IS THE LONG STICKER THAT STATES THIS MACHINE ACCEPTS 1-5-10-20-50-100 BILLS ECT. WOULD LIKE TO FIND A NOS ONE, THANKS MIKE.

[stormrider]

WANT TO PURCHASE THE FRONT DOOR STICKER FOR A UPRIGHT IGT S-PLUS. THIS IS THE LONG STICKER THAT STATES THIS MACHINE ACCEPTS 1-5-10-20-50-100 BILLS ECT. WOULD LIKE TO FIND A NOS ONE, THANKS MIKE.

Here's one on ebay


http://cgi.ebay.com/IGT-S-Bill-Validator-sticker-1-5-10-20-50-100_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem25513ca56eQQitemZ160276718958QQptZLHQ5fDefaultDomainQ5f0QQsalenotsupported

[jay]

you can also get lighted ones.....

[rickhunter]

The electroluminescent ones are the coolest, but I think there's a minimum order.  I forget exactly where they were purchased from, but some of the members here might have some extra ones that they may want to sell.

I purchased the regular ones brand new, they were in fact drop shipped from sunkist graphics, from this guy.  He was pretty cool to deal with about 2 years ago.

http://www.casinonetworkinc.com/

[ashyron]

I bought this one and eventually it'll come in.

[blueridgeslots]

Top is Factory IGT (New Jersey Version)  bottom is aftermarket, both new with film on the front

[Magicslots]

Those lighted ones are really cool. If anybody has an extra to sell, I am interested in one. Providing it doen't cost two arms and two legs...it
would be kind of hard to get around then   Seriously...I am looking for one for my S+

[idesign]

Those lighted ones are really cool. If anybody has an extra to sell, I am interested in one. Providing it doen't cost two arms and two legs...it
would be kind of hard to get around then   Seriously...I am looking for one for my S+

I think they are only for the S2000 as I recall.  The voltage in the S+ won't work with these.

[stormrider]

Those lighted ones are really cool. If anybody has an extra to sell, I am interested in one. Providing it doen't cost two arms and two legs...it
would be kind of hard to get around then   Seriously...I am looking for one for my S+

I think they are only for the S2000 as I recall.  The voltage in the S+ won't work with these.

I have a lighted one installed on a S+ bought it sometime ago from Jim at blueridge
at the time it was the last one he had.

[idesign]

You are right.  I just checked one I had and it works off of 110V so no problem using it on an S+.

[knagl]

Top is Factory IGT (New Jersey Version)  bottom is aftermarket, both new with film on the front

Do machines in New Jersey not accept $1 bills?

You are right.  I just checked one I had and it works off of 110V so no problem using it on an S+.

I thought they were designed for the S+, no?  I know it was plug-and-play in my S+ with no modification needed.

[jay]

When you say plug and pray.... did you have to drill a hole in the door ? and did you steal the 110 from the belly florescent, if so was there a inline connector provided or was this a mod ?

Inquiring mind wants to know.....

[blueridgeslots]

Top is Factory IGT (New Jersey Version)  bottom is aftermarket, both new with film on the front

Do machines in New Jersey not accept $1 bills?

You are right.  I just checked one I had and it works off of 110V so no problem using it on an S+.

I thought they were designed for the S+, no?  I know it was plug-and-play in my S+ with no modification needed.

No $1 in Jersey allowed, $5 is the smallest, now on the other hand, there are places that allow max of a $20 such as WV Lottery

also, there is no need to drill any hole in the door, the connection is made via a flat ribbon cable that is fed through the bezel opening, it is made into the decal, when installed correctly you can't see it, and connects right inside the door to the control box, the 110 is picked up on a S+ at the back of the power supply (Right Rear Corner), on a S-2000 off the Power Dist Box in the center of the back wall (behind the hopper), the control signal is picked up from the BV entry bezel light bulbs

[pinballmike49]

Just wanted to say a door decal was located from Darell at Slots FOR HOME. Thanks to everbody for their input on my request.

[ashyron]

Just wanted to say a door decal was located from Darell at Slots FOR HOME. Thanks to everbody for their input on my request.

I probably should keep my big mouth shut but I'm learning quickly who to buy things from and he is one I won't buy from anymore.   It an attitude thing.  If you don't have a good attitude, why do you work with the public.  Heck, I don't work with consumers cause I frankly don't like them, so I stay away.   It took 2 years to figure that out.   Oh the stories.  So far my favorite person to get things from is Jim at Blue Ridge Slots because he doesn't overcharge for things I buy.   At least I don't think he does.  And he has a good personality and good attitude.  It's just my 2 cents worth.

[pinballmike49]

Sorry to hear about some problems you had before. Not long ago I was trying to locate a round top box for a S-plus machine with many negative results. I  thought I had one from one of the major vendors in California. The person stated he had one for $75.00, NO PROBLEM LETS SEND IT OUT. This person stated it would take a few weeks as they were moving their location, NO PROBLEM I'LL WAIT. After a few weeks and no call backs I waited. approximately seven weeks later I called and a person answered the the phone, wife or girlfriend ? She advised they were out of the round top boxes a long time ago. Just lately a call was placed to Darell at SLOTS FOR HOME. He advised he had a complete round top box with hardware for less than $75.00 and I was very well pleased when it arrived. Last night I checked my email and noticed Darell sent me a note. He stated a front door sticker is on its way to you at no charge, Way can I say ? I just want to thank all the members that tried to help me out with my request.

[ashyron]

So did you ever get it?  It doesn't sound like you did.  Have you ever found one?

[pinballmike49]

Sorry to say the complete write up didn't go in, it showed as a double click  The above write-up was corrected in the modify mode. Time for a new key board ?

[jay]

WWG perchance ?

[brichter]

Just lately a call was placed to Darell at SLOTS FOR HOME. He advised he had a complete round top box with hardware for less than $75.00 and I was very well pleased when it arrived. Last night I checked my email and noticed Darell sent me a note. He stated a front door sticker is on its way to you at no charge, Way can I say ? I just want to thank all the members that tried to help me out with my request.

Yup, Darell is a good guy. I wish he had more stuff so I could buy it all...

[knagl]

When you say plug and pray.... did you have to drill a hole in the door ? and did you steal the 110 from the belly florescent, if so was there a inline connector provided or was this a mod ?

As Jim said, no holes required, and it came with a 110 plug that plugs directly into the S+ power supply.  No modification of any kind required.  It was a very easy install, and I'm very pleased with the results.

WWG perchance ?

    Sounds like something they'd do, but pinballmike said he was dealing with a vendor in California.  WWG is in Minnesota.

[knagl]

No $1 in Jersey allowed, $5 is the smallest

Very interesting.  Thanks for the info, Jim.

[stayouttadabunker]

Those front panel DBV decals, I remember on the old site,
there was some discussion about the flashing module being updated so that it flashed more slowly, perhaps?
Does anyone have one of the updated ones actually set up and working...
it would be cool to see the difference between the old DBV sticker and the newer updated one.
I could make a short video clip of my older one...I think it goes too fast across the denominations really...

[rocky mountain slots]

i have brand new door decals for s2000 anybody what to buy one

[Ron (r273)]

Those front panel DBV decals, I remember on the old site,
there was some discussion about the flashing module being updated so that it flashed more slowly, perhaps?
Does anyone have one of the updated ones actually set up and working...
it would be cool to see the difference between the old DBV sticker and the newer updated one.
I could make a short video clip of my older one...I think it goes too fast across the denominations really...

You mean this one?

<a href="http://www.youtube.com/v/lKLzBQLGnLI&rel=0" target="_blank">http://www.youtube.com/v/lKLzBQLGnLI&rel=0</a>