Welcome, Guest. Please login or register.
November 22, 2024, 09:48:30 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  Mikohn Progressive Systems.
| | |-+  Cham II in a S2000 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Cham II in a S2000  (Read 22814 times)
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« on: July 15, 2009, 08:00:30 PM »
Hi i got a CHAM II meter... logic board... and power supply and the cables to hooks them all up..

Im missing the piggy back board.. but im going to be getting one...

There is the one plug on the logic board that has the two black ears.. i have that wire also and it plugs right in... im assuming the other end goes to the s2000 machine some how... however the other end of my cable is just cut off.. there are three wires... red.. black.. white..

Does anyone know how to hook this up or if i need anything else? Thanks

-Tom-
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #1 on: July 15, 2009, 08:23:07 PM »
You need the ChamII+ board and ribbon cable to connect to the meter.
check the upload a new file section for a Mikohn ChamII manual.
Logged
The only way to beat the casino is to own it
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #2 on: July 15, 2009, 09:56:17 PM »
I have the board and cables, from the boards interface port that hooks to the s2000, I don't know the wiring for that... Is it the same as the s+ in the manual or different?

-Tom-
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #3 on: July 18, 2009, 06:45:05 PM »
Does anyone know how the 3 wires form the interface port wires into the s2000? i know there has to be someone with this display hooked to a s2000 machine.. I have a red, white and black wire in the cable... Thanks

-Tom-
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #4 on: July 18, 2009, 07:29:30 PM »
i will put up how mine is wired when i get home, make sure you have a cham II + (plus)
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #5 on: July 18, 2009, 07:32:55 PM »
Thanks im pretty sure i have a Plus model. Thanks

-Tom-
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #6 on: July 18, 2009, 07:42:18 PM »
ok on the chame J7 on the row that is away from edge is pins 1 3 5 7 9 11 13

on the motherboard of s2000 J15 on all of mine but some have said its J85, but i have never seen the J85 one. bottom is pin 1

cham pin 13 to MB pin 2
cham pin 11 to MB pin 1
cham pn 3 to MB pin 3

you will also most likely need to program the cham using the psp software and connection a pc or laptop serial port 1 or 2 only to the cham serial port

pc pin 2 to cham pin 2
pc pin 3 to cham pin 3
pc pin 5 to cham pins 1 and 5

if your lucky the psp program will mysteriously appear in the submit a new file section
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #7 on: July 18, 2009, 07:49:08 PM »
Thanks alot.. ill try it when i get home.. the display came out of a programmed machine.. is it possible it will just work when i plug it in?

-Tom-
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #8 on: July 18, 2009, 07:51:32 PM »
mine didnt since it was a linked progressive with other machines (all machines had same progressive amount
yours will most likely have to be redone to be standalone on the cham and linked in the s2000
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #9 on: July 18, 2009, 08:45:55 PM »
Ok I figured out the pins... Is there a certian type of connectors that I can buy to hook these 3 wires to each pin..

-Tom-
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #10 on: July 18, 2009, 08:56:28 PM »
i four pin cd rom audio connector works for the MB side you may have to cut of the key release
then splice to the cable you have
Logged
westec1
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 36
Offline Offline

Gender: Male
Posts: 263
« Reply #11 on: July 18, 2009, 10:14:41 PM »
The connectors that I use for the MB on S+ are from Mouser Electronics

You can find them here: 

http://ca.mouser.com/Search/Refine.aspx?N=3408075&Keyword=571-3-640428-4&FS=True
« Last Edit: July 19, 2009, 02:20:19 PM by westec1 » Logged
Wes propeller
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #12 on: July 19, 2009, 01:27:05 AM »
Quote from: zarobhr on July 18, 2009, 07:42:18 PM

on the motherboard of s2000 J15 on all of mine but some have said its J85, but i have never seen the J85 one. bottom is pin 1


Here's the Vision mobo connector diagram, I believe S2000 is the same. As you stated, it's J15, there is no J85.

* Vision_mobo.JPG (291.38 KB, 1664x2144 - viewed 465 times.)
Logged
Thanks,
Bill
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #13 on: July 19, 2009, 02:14:23 AM »
Thanks for the tip on the connector.. i just happen to have a gutted computer and that cable worked great... however no luck on getting the display to work... all it says is "$0.00" and then it says "C1"

In the options it says Progressive is disabled.. i cant enable it... i put in my Key 31 chip into the game EPROM location and when it the game boot up all it says is NETPLEX is Down... and doesnt go any further... Any ideas... i appreciate the help here alot.. thanks for bearing with me...

-Tom0
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #14 on: July 19, 2009, 06:09:33 AM »
I have not tried this before, but I thought of the usual "make sure there are no credits on the machine advice."

Also did you do a NETPLEX AUTO CONFIG from the setup menu?

Just a few tired thoughts.. I am sure that someone has much better suggestions and directions.

Regards,

CaptainHappy CaptainHappy
 nlg ADMIN
Logged
  Come sail away, Come sail away Come sail away with me..
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #15 on: July 19, 2009, 09:28:37 AM »
I don't know S2000 but here are a few things that may help point you in the right direction.

A ChamII+ is not a Netplex device ... on a S+ this is considered a linked progressive (even though it is standalone). I believe (not absolutely sure)  that there are Netplex progressives that integrate different than the ChamII+

The C1 is however indicitive that it is not talking to the slot specifically the data return.

The 0.00 and other values, messages etc get programmed via vi a PC running the DOS program called PSP.
Though PSP you set:
      Base Amount (the amount the progressive reverts to before after it is won) - normally this is about equal to the top award.
      Current Amount - this is any value you want but generally it is equal or above the base amount.
      Incremental percentage - I use 4% this way each quarter gets me a penny on the display .... casinos use any where between 1/8 of this ---- 8 coins = 1c to 100 coins = 1c depending on how active the progressived is.

     There are lots of other cool things to play with in PSP as well but those are the main ones..
Logged
The only way to beat the casino is to own it
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #16 on: July 19, 2009, 10:36:53 AM »
I am trying to hook up the same thing. Does the CHAMII+ require a CON1 or CON2 to run in a S-2000? Scratch Head

Ron
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #17 on: July 19, 2009, 10:43:56 AM »
no it does not.

also on the progressiive setep on the cham, using the switch and buttons make sure it is in standalone
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #18 on: July 19, 2009, 11:13:40 AM »
Quote from: zarobhr on July 19, 2009, 10:43:56 AM
no it does not.

also on the progressiive setep on the cham, using the switch and buttons make sure it is in standalone



That clears it up for me, that's why all the settings are done with a key chip in the S-2000....... Duh!

Thanks zarobhr!

Ron
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #19 on: July 19, 2009, 02:02:54 PM »
A CHAMII (non plus) is a link only and requires a CON2 to drive it.
A CHAMII+ can be set into linked mode and be driven from a CON2 as well.

A CON1 to the best of my knowledge can not drive a ChamII.



 
Logged
The only way to beat the casino is to own it
sommer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 60
Offline Offline

Gender: Male
Posts: 151
« Reply #20 on: July 19, 2009, 05:14:13 PM »
trying to hook up my cham II..
i need help on j-85 connection pin#number?is #1 from top to bottom or bottom to top?? and j-15 progressive on MB, what's that for?? i tried that j-15 connector nothing happened..
thanks
sommer
Logged
IGT S-2000...
Sorry about my grammar..lol..it is my second language.!!lmao...
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #21 on: July 19, 2009, 05:16:43 PM »
i have never seen the j85 only the j15 if you have j15 thats what you hook up to the cham II + , do you have cham II or Cham II +
Logged
sommer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 60
Offline Offline

Gender: Male
Posts: 151
« Reply #22 on: July 19, 2009, 05:55:17 PM »
Quote from: zarobhr on July 19, 2009, 05:16:43 PM
i have never seen the j85 only the j15 if you have j15 thats what you hook up to the cham II + , do you have cham II or Cham II +
j-85 at power supply. i have cham II stand alone.  yes

* j-85~15.JPG (71.61 KB, 640x480 - viewed 448 times.)
Logged
IGT S-2000...
Sorry about my grammar..lol..it is my second language.!!lmao...
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #23 on: July 19, 2009, 05:58:21 PM »
Quote from: jay on July 19, 2009, 09:28:37 AM
A ChamII+ is not a Netplex device ... on a S+ this is considered a linked progressive (even though it is standalone). I believe (not absolutely sure)  that there are Netplex progressives that integrate different than the ChamII+

Great point Jay, I did not pay enough attention to the CHAM II+ in the title, and I assumed it was the netplex spectrum meter because of Tom's mention of netplex. I should have looked better!  Duh! frying pan Thanks for catching that! applause

CaptainHappy CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #24 on: November 12, 2009, 03:51:38 PM »
sommer,
Did you get this Cham II or Cham II + to work yet? Scratch Head 3
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.094 seconds with 20 queries.