Welcome, Guest. Please login or register.
November 25, 2024, 04:06:25 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  JCM DBV-45, DBV-145, and DBV-200 Bill Validators.
| | |-+  CBA-135-SG Validator by JCM Need Info		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: CBA-135-SG Validator by JCM Need Info  (Read 26158 times)
Forrhouse
Manufacturing Equipment & Parts to Keep Slots that are No Longer Supported by the Manufacturer running.
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 252
Offline Offline

Gender: Male
Posts: 532


Life is too short, live, love and have a good time
« on: July 18, 2009, 12:07:50 AM »
I have a CBA-135-SG Validator made by JCM. I know it is for Canadian currency, but what is the American money equivelant to it.  Is it equivelant to a JCM-200?  It came out of one of my WMS 401 machines. Can a DBV-200 be put in its place without any change of harnesses or cshboxes, etc.
Thanks,
Eric
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #1 on: July 18, 2009, 02:48:15 AM »
equivalent to a U.S 145 or 200.  the transport is different and I believe some wiring(can't remember 100%) is different as well.  When you have them both you will see what's required.  The entry bezel is different also.


W
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #2 on: July 18, 2009, 03:23:14 AM »
Pretty sure wiring is the same and use a transport out of a Bally 5500  The bezel becomes a problem. Ashyron has the machine, maybe he can post a Pic of the bezel,
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Forrhouse
Manufacturing Equipment & Parts to Keep Slots that are No Longer Supported by the Manufacturer running.
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 252
Offline Offline

Gender: Male
Posts: 532


Life is too short, live, love and have a good time
« Reply #3 on: July 18, 2009, 03:50:18 AM »
I have the Bezel, etc. See the picture below. Does anybody want to trade for a DBV- 200-SG?
So if I understand correctly then that means means I can use the same transport from the CBA-135-SG?
Thanks,
Eric

* CBA135 SH Canadian.jpg (46.09 KB, 364x425 - viewed 359 times.)

* CBA135 SH.jpg (58.86 KB, 532x500 - viewed 391 times.)
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #4 on: July 18, 2009, 02:46:12 PM »
Quote from: Forrhouse on July 18, 2009, 03:50:18 AM
I have the Bezel, etc. See the picture below. Does anybody want to trade for a DBV- 200-SG?
So if I understand correctly then that means means I can use the same transport from the CBA-135-SG?
Thanks,
Eric
No The CBA uses two wire plugs. DBV one. I think I'm right on this one , the two slots on the chassis, the BV head slids on are wider. I think my Son used the bottom plate off of a CBA head  and mounted a 145 or a 200 SG head to it. another machine he just changed the whole chassis with one out of a 5500. PM me when you are up and about.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #5 on: July 18, 2009, 05:01:53 PM »
The transport is different.  I think I used the bottom plate with minor mods.  The best swap is to change the complete assembly.  The plate the bezel fits into on the door has a small opening on a U.S machine and large opening on a Canadian machine.

W
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #6 on: July 18, 2009, 05:44:43 PM »
Wow, Talk about timing.
This was my exact project for today.
I purchased two Transport assemblies for Williams 40X machines. JCM made two types.

1) was the type where the DBV head screwed directly to the transport assembly with 4 screws.
2) Had a quick disconnect of the DBV head, It had a plate screwed to the DBV head and slid into the transport, held by a large thumb screw.

The two I got were the quick disconnect type. Only one had the lower bracket for the disconnect and both were missing the bracket that screws to the DBV head.
I was able to modify two plates from some CBA heads that I had laying around.
I have two CBA heads that I don't need if someone can use them.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
Op-Bell
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 326
Offline Offline

Gender: Male
Posts: 854
« Reply #7 on: July 18, 2009, 06:56:42 PM »
The CBA is wider than the DBV, 71mm instead of 67mm. This carries all the way through the transport and stacker. It's possible to replace the CBA head on a Canadian transport with a DBV head for US currency, but it's not possible to replace a DBV on a US transport with a CBA for Canadian currency, as the paper jams in the stacker. I would change the complete assembly, there's less to go wrong.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #8 on: July 18, 2009, 07:11:24 PM »
It also has different connections as Buzz stated.

W
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Forrhouse
Manufacturing Equipment & Parts to Keep Slots that are No Longer Supported by the Manufacturer running.
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 252
Offline Offline

Gender: Male
Posts: 532


Life is too short, live, love and have a good time
« Reply #9 on: July 18, 2009, 07:48:32 PM »
Well, the machine that my cba-135 came out of has the Canadian transport, stacker and whatever else goes with it.
So would it just be better to replace the cba-135 witha DBV-200-SG like op-bell says is possible.  Would there be possibility of jamming with this setup?  It sounds like I would need a different harness to connect the 200 head. Am I correct.
Thanks,
Eric
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #10 on: July 19, 2009, 04:36:06 AM »
I am using a DBV200-SG in my Canadian Wms 401 with the Canadian transport and front bezel. I used the bottom plate that held the old head and drilled extra holes in the bottom of the dbv200 to match, since the screw holes didn't line up. I had to take care to make sure that the final position of the head lined up correctly with the transport before drilling. I also had to cut off the front lip of the dbv200-SG because there was no room behind the Canadian bezel for the lip. The harness in my machine had already been changed out, so I can't speak to that. I've had absolutely no issues with this setup and have had the 200 head in the machine for over two years.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #11 on: July 19, 2009, 06:04:05 AM »
Stat,

I am sure that I am speaking for Eric  yes yes yes when I say that a picture may be worth a thousand words, but many very detailed high resolution pictures from an awesome camera  Hail would be worth +KARMA POINTS!!!  propeller propeller propeller (Of course I am speaking for Eric, and I have no selfish motivations for myself,  no no no but in case you know I would read the post out of general interest!  Help You know my email as well! A detailed word doc with captions, detailed instructions, zoom pictures, engineering templates, 3D SolidWorks CAD Drawings, etc, etc, etc. is totally optional!!! bust gut laughing bust gut laughing bust gut laughing bust gut laughing bust gut laughing

CaptainHappy CaptainHappy  rotflmao

Quote from: StatFreak on July 19, 2009, 04:36:06 AM
I am using a DBV200-SG in my Canadian Wms 401 with the Canadian transport and front bezel. I used the bottom plate that held the old head and drilled extra holes in the bottom of the dbv200 to match, since the screw holes didn't line up. I had to take care to make sure that the final position of the head lined up correctly with the transport before drilling. I also had to cut off the front lip of the dbv200-SG because there was no room behind the Canadian bezel for the lip. The harness in my machine had already been changed out, so I can't speak to that. I've had absolutely no issues with this setup and have had the 200 head in the machine for over two years.

Quote from: Forrhouse on July 18, 2009, 07:48:32 PM
Well, the machine that my cba-135 came out of has the Canadian transport, stacker and whatever else goes with it.
So would it just be better to replace the cba-135 witha DBV-200-SG like op-bell says is possible.  Would there be possibility of jamming with this setup?  It sounds like I would need a different harness to connect the 200 head. Am I correct.
Thanks,
Eric
Logged
  Come sail away, Come sail away Come sail away with me..
Forrhouse
Manufacturing Equipment & Parts to Keep Slots that are No Longer Supported by the Manufacturer running.
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 252
Offline Offline

Gender: Male
Posts: 532


Life is too short, live, love and have a good time
« Reply #12 on: July 19, 2009, 08:33:42 PM »
Hi Stat and Mark. Sounds interesting and like a great job Stat.  If you have time a picture of the 200 mounted would be great.
My only confusion is the lip that was cut off. Stat, by lip do you mean the bracket with the spot for the screw that fastens it to the transport?  Is your front bezel like the one I have in the picture? A big thanks to all who have helped me with this.
Thanks
Eric
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #13 on: July 19, 2009, 08:46:15 PM »
Quote from: Forrhouse on July 19, 2009, 08:33:42 PM
...
My only confusion is the lip that was cut off. Stat, by lip do you mean the bracket with the spot for the screw that fastens it to the transport?  Is your front bezel like the one I have in the picture?
...

Yes, my bezel is the same. The lip I am referring to is the bill intake on the front of the dbv head. The CBV135 has a flat face, just like the dbv200SS for the IGT. Bally and Wms DBV200s (SG & SH) have a short black plastic ramp that sticks out from the front of the head into which the bills are inserted. This must be cut off if you want to use the Canadian door hardware and bezel. I'll post some pictures shortly.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Forrhouse
Manufacturing Equipment & Parts to Keep Slots that are No Longer Supported by the Manufacturer running.
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 252
Offline Offline

Gender: Male
Posts: 532


Life is too short, live, love and have a good time
« Reply #14 on: July 19, 2009, 10:13:20 PM »
Ok, I understand now. I appreciate the help.
Eric
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #15 on: July 19, 2009, 10:44:53 PM »
Quote from: Forrhouse on July 19, 2009, 10:13:20 PM
Ok, I understand now. I appreciate the help.
Eric

Are you saying that I don't need to post the 19 pictures that I've taken? bawling bawling

Too late!

Here is the front of the machine with the door closed and opened.

* D3C_5335.sm.jpg (816.64 KB, 1800x1195 - viewed 439 times.)

* D3C_5336.sm.jpg (618.37 KB, 1800x1195 - viewed 398 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #16 on: July 19, 2009, 10:48:50 PM »
..the left and right harness connections...

* D3C_5337.sm.jpg (649.8 KB, 1800x1195 - viewed 442 times.)

* D3C_5341.sm.jpg (713.46 KB, 1800x1195 - viewed 384 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #17 on: July 19, 2009, 10:50:11 PM »
...some closeups of the harness wiring...

* D3C_5358.sm.jpg (593.68 KB, 1800x1195 - viewed 507 times.)

* D3C_5359.sm.jpg (603.21 KB, 1800x1195 - viewed 415 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #18 on: July 19, 2009, 10:51:04 PM »
...closeups of the left harness wiring front and back...

* D3C_5362.sm.jpg (545.92 KB, 1800x1195 - viewed 398 times.)

* D3C_5363.sm.jpg (641.54 KB, 1800x1195 - viewed 415 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #19 on: July 19, 2009, 10:52:42 PM »
one more...

* D3C_5361.sm.jpg (472.59 KB, 1800x1195 - viewed 426 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #20 on: July 19, 2009, 10:54:24 PM »
The underside of the assy showing how the head is attached via the special plate that goes with the Canadian transport, and the front of the transport with the head removed. Note that the bottom of the metal deck that holds the dbv head is smooth with no screw holes and has a hole for a tongue in the back center.

* D3C_5340.sm.jpg (747.4 KB, 1800x1195 - viewed 475 times.)

* D3C_5343.sm.jpg (846.46 KB, 1195x1800 - viewed 483 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #21 on: July 19, 2009, 10:58:40 PM »
Here is the underside of the dbv head with the special plate attached. Note the two-pronged tongue at the top that fits into the hole on the transport and the two screws securing the plate to the head. I had to drill new holes in the base of the head to match up to these screw holes. The head needs to be carefully aligned with the transport before marking the location of these holes.

Another alternative would be to cannibalize the lower outer shell of the CBV and replace the stock shell of the dbv200. The screw holes would then be in the right place and the head should be correctly aligned, as long as the replacement shell is fitted correctly to the dbv200. This might or might not work in your case.

* D3C_5346.sm.jpg (569.02 KB, 1800x1195 - viewed 350 times.)

* D3C_5347.sm.jpg (606.4 KB, 1195x1800 - viewed 1320 times.)
« Last Edit: July 19, 2009, 11:06:35 PM by StatFreak » Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #22 on: July 19, 2009, 11:02:43 PM »
Here are the left and right sides of the head with the bezel/facade removed and with the bottom plate still in place. In the first picture, the front is facing right, in the second, left.

* D3C_5351.sm.jpg (722.45 KB, 1195x1800 - viewed 423 times.)

* D3C_5356.sm.jpg (562.24 KB, 1195x1800 - viewed 401 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #23 on: July 19, 2009, 11:04:32 PM »
Here are closeups of the cut-off front lip.

* D3C_5352.sm.jpg (586.15 KB, 1800x1195 - viewed 383 times.)

* D3C_5353.sm.jpg (571.41 KB, 1800x1195 - viewed 392 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #24 on: July 19, 2009, 11:07:56 PM »
Finally, a shot of the back of the bezel/facade and the right side pin connections

* D3C_5348.sm.jpg (842.97 KB, 1195x1800 - viewed 413 times.)

* D3C_5357.sm.jpg (627.63 KB, 1800x1195 - viewed 355 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.167 seconds with 20 queries.