Welcome, Guest. Please login or register.
November 22, 2024, 05:35:00 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally S6000 noisy reel		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: 1 2 [3] 4 5 6 ... 8 Go Down Print
Author Topic: Bally S6000 noisy reel  (Read 77844 times)
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #50 on: October 17, 2009, 01:05:09 AM »
Ok I'll take a close look at the backplane board and let you know if I see anything.  Also I'll try to post a video or sound clip of the noise.  This will be my last post untill sunday evening because I'm going to Atlantic City this weekend. Ok dabunker and jdkmunch On that note I been to Atantic City since I had this problem and I listened every close to multiple Bally S6000 machines and none of them make the noise mine is making so I can assure you the problem is real.
So please hang in there I need all the help I can get. Wish me luck this weekend. Thanks to all.    Mike
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #51 on: October 17, 2009, 01:09:40 AM »
Quote from: StatFreak on October 17, 2009, 12:59:57 AM
Quote from: dpalmi on October 16, 2009, 01:52:26 PM
Quote from: stayouttadabunker on October 16, 2009, 01:04:10 PM
It is possible to wiggle the harness while the reels are spinning during actual "game" mode...
but he would have to make a bypass harness for the door optics to get his hand in there with the door open...

I have not worked with Bally's - but if it was on my IGT, I would just remove the reel glass itself - 4 screws...

Dan #2

I noted that daddy has gone beyond this test, but for future reference, Bally 6000s don't have door optics. One only has to pull out the white cherry switch to play the machine in normal "closed door" mode with the door open. No manipulation of glass or belly is necessary.
David,
   You must be thinking of S5500 machines, the S6000 does have optics.

Thanks and see you soon.....
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #52 on: October 17, 2009, 01:12:12 AM »
I should mention that when I want to fool a S6000 to think the door is closed, I hang my flourescent trouble light beside the receiver optics on the cabinet, it then thinks it's closed.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #53 on: October 17, 2009, 01:44:23 AM »
When I wanna fool my S+ into thinking the door is closed, I slam my garage door shut...
doesn't work though.... arrow Tongue Out
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #54 on: October 17, 2009, 06:55:20 PM »
Quote from: a69mopar on October 17, 2009, 01:09:40 AM
Quote from: StatFreak on October 17, 2009, 12:59:57 AM
Quote from: dpalmi on October 16, 2009, 01:52:26 PM
Quote from: stayouttadabunker on October 16, 2009, 01:04:10 PM
It is possible to wiggle the harness while the reels are spinning during actual "game" mode...
but he would have to make a bypass harness for the door optics to get his hand in there with the door open...

I have not worked with Bally's - but if it was on my IGT, I would just remove the reel glass itself - 4 screws...

Dan #2

I noted that daddy has gone beyond this test, but for future reference, Bally 6000s don't have door optics. One only has to pull out the white cherry switch to play the machine in normal "closed door" mode with the door open. No manipulation of glass or belly is necessary.
David,
   You must be thinking of S5500 machines, the S6000 does have optics.

Thanks and see you soon.....
Wayne

Another case of CRS. I did/do not remember seeing optics on Buzz' S6000s. Getting older sucks. knockout
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #55 on: October 19, 2009, 04:49:29 PM »
Ok heres A video of the noise. Mike

<a href="http://www.youtube.com/v/Hsb7WUA5kY0&rel=0" target="_blank">http://www.youtube.com/v/Hsb7WUA5kY0&rel=0</a>
« Last Edit: October 19, 2009, 11:14:28 PM by a69mopar » Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #56 on: October 19, 2009, 05:06:42 PM »
Jeesh! Sounds like elephant blowing it's trunk!
But I'll tell you what...mine sounds exactly the same...
Yours is a touch louder because they're spinning a little faster than mine?
Play both videos over and over and compare...
not too much difference except I had some music playing in the background and
yours has 4 reels!  yummy

Uh,...when copying and pasting from youtube...
just paste the part between the "  " marks ( from  http to 5kY0 ) ,
so you post up one single screen instead of two!
<a href="http://www.youtube.com/v/eWIQp7Aollc&rel=0" target="_blank">http://www.youtube.com/v/eWIQp7Aollc&rel=0</a>
« Last Edit: October 19, 2009, 05:12:42 PM by stayouttadabunker » Logged
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #57 on: October 19, 2009, 05:16:35 PM »
I guess  I need to wait on a69mopar for a verdict.  Being I was just in atlantic city this weekend and listened to many S6000's I can tell you That noise IS NOT the norm.  Mike
Thanks for the Youtube posting tip.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #58 on: October 19, 2009, 05:25:22 PM »
I wonder if it's a bit quieter with the door closed?
I took the video with the door wide open and fairly close up.
Plus, the insulation/rubber around the door may be worn out or loose too.
That rubber acts as a sound barrier somewhat...
Plus, our machines seem a lot louder at home where it's not as noisy as a full-blown casino floor.
Logged
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #59 on: October 19, 2009, 07:14:18 PM »
Its noisy even with the door shut.  And what you say about home vs a casino is true, but I went as far as putting my ear next to the reel glass to get a good listen.   Mike
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #60 on: October 19, 2009, 07:45:35 PM »
I have to agree with Stayout,  I had a 5500 and it sounded exactly like that.  I have a 6000 with 3 reels and it's much quieter but it still has that same sound.    I'm getting a 4 reel kit.  I'll post the sound it makes as soon as I get it.   It's annoying as all hell I know.  When I got my 5500 it drove me nuts.  I wound up talking to Slots4Home and he sold me new reels that were much quieter. 
Logged
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #61 on: October 19, 2009, 07:54:27 PM »
Ok, but why the last spinning reel making the noise.  It may be a common problem, but still a problem.  Mike

PS. Stayout mention  insulation/rubber around the door, but I don't have  insulation/rubber around my door??
« Last Edit: October 19, 2009, 08:09:57 PM by daddy2yea » Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #62 on: October 19, 2009, 09:05:31 PM »
I'm shopping with my wife (mandatory).  Will check when I get home

W
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #63 on: October 19, 2009, 09:36:00 PM »
Quote from: a69mopar on October 19, 2009, 09:05:31 PM
I'm shopping with my wife (mandatory).  Will check when I get home

W

Well now,... don't go spending everything!.... Tongue Out
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #64 on: October 19, 2009, 09:44:02 PM »
You said you swapped all reels and have the same result.  I think they all are making the exact same sound and it just appears that the last reel is making the noise.    I can hear from the video that the sound seems a little lower as each reel stops.
Logged
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #65 on: October 19, 2009, 10:02:04 PM »
NO, belive me there not making the same noise.  There a test  that spins and stops all the reels simultaneously  that I have done. And it clear its the 4th reel making the noise.  Mike
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #66 on: October 19, 2009, 10:14:37 PM »
I wonder if anyone else has a short video they can post for some more sound comparison?
Whoever has the loudest one gets a free Bally machine from Joey! yes


(By the way, he never gives one away...I keep on trying to give him hints but...) rotflmao
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #67 on: October 19, 2009, 10:24:34 PM »
Give me till Thursday and I'll post mine.  Right now they are in a cold dark FedEx warehouse.

Logged
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #68 on: October 19, 2009, 11:22:10 PM »
If look on youtube there a guy that got a video of an Andy Capp S6000 Machine, And if you listen real close you can hear a hint of the noise mine is making.
Mike
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #69 on: October 19, 2009, 11:29:44 PM »
This one?
He hits a bonus spin at 2:13
Who is this "Mitchellenterprises" guy?>>>


<a href="http://www.youtube.com/v/KyYpVMRGfuQ&rel=0" target="_blank">http://www.youtube.com/v/KyYpVMRGfuQ&rel=0</a>
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #70 on: October 19, 2009, 11:36:35 PM »
Mike,
  Your machine is nowhere as loud as I expected,  I know that 4 reel machines are noisier and I don't have any shopped currently for comparison, but if you have tape between the basket and strips, it shouldn't be as noisy as it is currently.  Bunker, your machine is a little noisy, I'd do the things that we said in the post and it should be better.  And both should make sure your reel strips are tight before you tape them (scotch permanent 2 way, or reel strip tape).  I'm thinking "power issue" on this.  I'll take a video of some that are quieter, but they will be 3 reel machines, which are quiter.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #71 on: October 19, 2009, 11:55:24 PM »
dabunker the "Mitchellenterprises" guy is www.slotsdirect.com    Wayne how do you check the power issue.  Also is there any kind of Door seal on these machines.    Mike
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #72 on: October 20, 2009, 12:03:57 AM »
<a href="http://www.youtube.com/v/Fs_pYex-E_U&rel=0" target="_blank">http://www.youtube.com/v/Fs_pYex-E_U&rel=0</a>   this may take a bit to upload, but here's the link.

Do you have a voltmeter?

no seal

w
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
daddy2yea
Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 248
« Reply #73 on: October 20, 2009, 12:32:37 AM »
Yes, I have a  voltmeter.  And let me say Wow your machines look great.   Mike
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #74 on: October 20, 2009, 02:08:56 AM »
On the left lower corner of the backplane board there are voltage probe points that are clearly marked what voltage they should be.  Check them with your meter and report back.  you can ground to the p.s.

Have a good night,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Pages: 1 2 [3] 4 5 6 ... 8 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.154 seconds with 21 queries.