Bally 6000 wba13 problem

[stormrider]

I picked up a unshopped S6000 had a few error codes which I cleared
came with a printer and wba13 no hopper or coin mech so my last problem seems to be
the original wba 13 was missing wire harness and plug on left side so I pulled a working wba13 from another 6000
now the game starts up reels spin wba 13 cycles but does not light up with green arrows.There is power to it
as I can see the 2 orange leds lit up dip switch is set # 2 on, as this was what worked on the other 6000 that is working
anybody help out on this ?

Thanks. Tim

[stormrider]

Did another ram clear to be sure also all dips on wba 13 set to off
Machine starts up fine wba 13 cycles then NO green lights
no errors on the display can't figure this one out 

[Bettor Slots]

Take a look at the MPU and make sure the switch hidden behind the bar and between the Pseudo Coin and Test buttons is in the up position as shown in this picture.

[stormrider]

Jim,

That was it  I can't believe that was the problem
I thought it was only needed to be in the up position it you had a coin mech
since this is coin less I ruled it out in my head 

K +


Thanks.   Tim

[a69mopar]

This is a very common mistake, a lot of people with perfectly good working machines turn this off then dont think about it when the BV doesn't work.

W