Welcome, Guest. Please login or register.
November 23, 2024, 02:36:26 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  SIGMA Reel Games.
| | |-+  Sigma Manuals SG50/SG32/ SG150		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Sigma Manuals SG50/SG32/ SG150  (Read 25988 times)
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« on: November 30, 2009, 03:50:10 PM »
clown2948/icu44444/gordy/pinball paul/ kmjm:

I compared my SG50 manual to the manual posted in the "submit file section" page for page  it is the same with the exception of a few pages that only apply to some display codes pertaining to 9 line operation. the SG/50 is a wide body machine, the SG/32 is the narrow body machine, the SG/150 uses a #340023 revA1 board, I saw that same board used in a SG/32, the main difference I noticed was that the piggyback board that was used on the original SG/32 board was incorporated into the board layout of the 340023 board, and a adapter harness from the piggyback to the plug on the logic board. So for those of you looking for info on your machine, as far as resets, meaning of errors and to clear errors etc. Get the manual that is in the file section. Should answer alot of your questions and concerns.

Hope this helps

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561
« Reply #1 on: December 08, 2009, 05:35:43 AM »
K+
Thanks Jim, I love the 150 and 300's . I actually swithed a 300 (Smokin 7's) to a 50 (Double Cherries) . Never meesed with the 50 before,but I know about the piggyback on the boards now Smiley
Logged
B-52BadByron
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 213
« Reply #2 on: February 24, 2010, 12:38:00 AM »
Where is the "submit file" section in this forum?  I looked under submit a new file and the manuals were not there.  I am new to this forum so please be specific as to how to get to the manuals.   Scratch Head

Thanks
Logged
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561
« Reply #3 on: February 24, 2010, 01:53:45 AM »
Up top under the list of vendors it says submit a new file  Crazy Which one are you looking for?   wave
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #4 on: February 24, 2010, 01:54:07 AM »
Quote from: B-52BadByron on February 24, 2010, 12:38:00 AM
Where is the "submit file" section in this forum?  I looked under submit a new file and the manuals were not there.  I am new to this forum so please be specific as to how to get to the manuals.   Scratch Head

Thanks

That was it. Files are uploaded there by members from their personal collections in response to specific member requests, and are then purged at regular intervals. We do not have a permanent repository of files. If there is a specific manual that you are in need of, please post a request and hopefully, one of our members will have a copy to share with you.


StatFreak garfield
nlg  Global Moderator
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
B-52BadByron
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 213
« Reply #5 on: February 24, 2010, 07:27:29 AM »
Thanks for the information.  I am looking for the sigma SG 50 manual.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #6 on: February 24, 2010, 09:41:40 AM »
The manual to which Jim was referring that can be used for the SG-50 was the SG-150, with the addition of two pages of schematics for the SG-50 board that might prove useful.

The three files that you need have all mysteriously appeared in the Submit section.  Tongue Out rotflmao They are:

- Sigma_SG_150B_manual.pdf
- SIGMA_50-310049.sch..pdf
- SIGMA_50B-310048.sch.pdf

Enjoy. garfield
 Wasn't Me Scratch Head 3
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
B-52BadByron
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 213
« Reply #7 on: February 24, 2010, 03:39:49 PM »
Thanks for all of the help!   applause applause applause Hail Hail Hail
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #8 on: May 08, 2012, 01:32:31 AM »
Can any one send me the manuals for this???

SG-50B

nOT SURE SURE WHAT THE WB-REELS MEAN???

Please pm me for mt e-mail address...

Thank you..

Mark
Logged
Mark
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #9 on: May 08, 2012, 11:09:39 AM »
 You've Got Mail

Ron (r273)
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #10 on: May 08, 2012, 12:21:34 PM »
Thank you Very Much Ron
Logged
Mark
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #11 on: May 12, 2012, 05:05:00 AM »
Hello. I just picked up a SG-50b Sigma Double Cherries machine last week for $50. It has a mind of it's own. I'm getting a couple of different error codes on the display when the game is playing. Does anyone have info on error codes for this machine? 0Q and 0P I believe are the two error codes I'm getting. I'll just be playing the machine and then it just locks up. The red LED display goes blank and the unit where you put in dollars bills starts turning off and on. If I open and close the door a bunch of times it will start working again and remembers where I left off. Really nice machine and need some help on getting it fixed. Thanks

Mike

* 462149_3994048129268_1222878659_33729089_82138412_o.jpg (127.7 KB, 960x1280 - viewed 1066 times.)
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #12 on: May 12, 2012, 12:31:19 PM »
 NLG Welcome riverratmike

Sorry I don't know anything about a Sigma SG-50b. Guessing at one of the codes OP I
might mean OP 1 (Overpaid by 1 coin) If that would be the case check your knife and
microswitch for correct adjustment.

Ron (r273)
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #13 on: May 12, 2012, 02:42:07 PM »
did you buy this slot off of craigs list???

Did you buy it from a guy out in LA???
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #14 on: May 12, 2012, 02:46:41 PM »
If you did...

If it was is this one it was missing the MPU board. He bought a used MPU board from a guy that said he was not sure if the MPU board was good and the Chip set on the

MPU board could be diffrent and was not sure if it would work.
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #15 on: May 12, 2012, 03:05:11 PM »
OPT 1 WRONG= ONE OF THE COIN DETECTED OPTICAL CIRCUITS IS BROKEN OR DIRTY.
ONE OF THE TWO COIN OPTICS.

OPT 2= IS THE SECOND COIN OPTIC.

OPT 12= MALFUCTION HAS BEEN DETECTED FOR BOTH OPTICS.

OPT 3= THE DROP OPTICS REPLACE OR CLEAN SENSOR. CHECK SENSOR WIRE.
Logged
Mark
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #16 on: May 12, 2012, 03:39:41 PM »
Quote from: drfreeze1739 on May 12, 2012, 02:46:41 PM
If you did...

If it was is this one it was missing the MPU board. He bought a used MPU board from a guy that said he was not sure if the MPU board was good and the Chip set on the

MPU board could be diffrent and was not sure if it would work.

Yeah I bought it off a guy on Craigslist here in Lake Havasu City, AZ.  I was playing it the other night and it worked for hours. The next day I was having alot of problems with it and the error codes were being displayed. What does MPU stand for? Also the coin comparitor isn't working. If you drop in a nickel it just stops at the top of the coin comparitor and doesn't move any further. I think I'm going to take it in to a tech here in Havasu and have some that knows these things better than I. Thanks everyone for the responses.
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #17 on: May 12, 2012, 03:59:30 PM »
The mpu is like a mother board.

It has all the program chips on it.

PM me you email address and i can send you the manual i have to see if it helps...

Have you checked all fuses??
Logged
Mark
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #18 on: May 12, 2012, 04:48:30 PM »
nope haven't checked any fuses. Where might I find those?
Logged
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #19 on: May 12, 2012, 04:53:16 PM »
Quote from: riverratmike on May 12, 2012, 04:48:30 PM
nope haven't checked any fuses. Where might I find those?
Quote from: drfreeze1739 on May 12, 2012, 03:59:30 PM
The mpu is like a mother board.

It has all the program chips on it.

PM me you email address and i can send you the manual i have to see if it helps...

Have you checked all fuses??




I sent ya a PM with my e-mail. Thanks
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #20 on: May 12, 2012, 05:09:29 PM »
 You've Got Mail
Logged
Mark
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #21 on: May 12, 2012, 05:59:54 PM »
Quote from: drfreeze1739 on May 12, 2012, 05:09:29 PM
You've Got Mail

Thanks! This will help me out a ton.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #22 on: May 12, 2012, 07:05:52 PM »
Quote from: riverratmike on May 12, 2012, 03:39:41 PM
Quote from: drfreeze1739 on May 12, 2012, 02:46:41 PM
If you did...

If it was is this one it was missing the MPU board. He bought a used MPU board from a guy that said he was not sure if the MPU board was good and the Chip set on the

MPU board could be diffrent and was not sure if it would work.

Yeah I bought it off a guy on Craigslist here in Lake Havasu City, AZ.  I was playing it the other night and it worked for hours. The next day I was having alot of problems with it and the error codes were being displayed. What does MPU stand for? Also the coin comparitor isn't working. If you drop in a nickel it just stops at the top of the coin comparitor and doesn't move any further. I think I'm going to take it in to a tech here in Havasu and have some that knows these things better than I. Thanks everyone for the responses.

I'll bet apples are oranges that you don't have a sample coin in the comparator.   

* PICT0001.JPG (96.06 KB, 640x480 - viewed 673 times.)
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #23 on: May 12, 2012, 07:20:27 PM »
Quote from: Buzz on May 12, 2012, 07:05:52 PM
Quote from: riverratmike on May 12, 2012, 03:39:41 PM
Quote from: drfreeze1739 on May 12, 2012, 02:46:41 PM
If you did...

If it was is this one it was missing the MPU board. He bought a used MPU board from a guy that said he was not sure if the MPU board was good and the Chip set on the

MPU board could be diffrent and was not sure if it would work.

Yeah I bought it off a guy on Craigslist here in Lake Havasu City, AZ.  I was playing it the other night and it worked for hours. The next day I was having alot of problems with it and the error codes were being displayed. What does MPU stand for? Also the coin comparitor isn't working. If you drop in a nickel it just stops at the top of the coin comparitor and doesn't move any further. I think I'm going to take it in to a tech here in Havasu and have some that knows these things better than I. Thanks everyone for the responses.

I'll bet apples are oranges that you don't have a sample coin in the comparator.   


Interesting. Is there supposed to be one in there? I'm new at this.
« Last Edit: May 12, 2012, 07:30:36 PM by riverratmike » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #24 on: May 12, 2012, 07:26:37 PM »
It won't work without one.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.096 seconds with 20 queries.