Welcome, Guest. Please login or register.
November 22, 2024, 09:31:08 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  Mikohn Progressive Systems.
| | |-+  Mikohn Power supplies		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] 2 3 Go Down Print
Author Topic: Mikohn Power supplies  (Read 22219 times)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« on: December 13, 2009, 05:28:06 PM »
I have a question that's been bothering me.
I checked the voltages coming out of a Mikohn power supply.
The one in question has the larger 12-pin AMP outlet connector.
Inside are 3 connectors going to the board.
Each connector has 4 wires. (Red,Purple,Black,Yellow)
With a multimeter ground common lead going to the black wire, and the other red lead going to the red wire: I get -12Vdc.
With a multimeter ground common lead going to the black wire, and the other red lead going to the purple wire: I get +12Vdc.
With a multimeter ground common lead going to the black wire, and the other red lead going to the yellow wire: I get +5Vdc.

Am I reading/checking for output voltages correctly? Scratch Head 2
Should I reverse my multimeter leads to get a different polarity?
 
Finally, does anyone know what the apparent needs for a +5Vdc and -12Vdc for with a Mikohn Power Supply?
So far, I haven't found anything that a Mikohn uses that needs these particular power sources. Scratch Head 3

Thank you for any help you can give me on this. yes
Click on picture to enlarge it!>>>

* Mikohn Power Supply 001.jpg (527.46 KB, 1024x768 - viewed 437 times.)
« Last Edit: December 13, 2009, 05:34:55 PM by stayouttadabunker » Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #1 on: December 13, 2009, 06:16:37 PM »
Not sure how you're getting -12v, but if you look at teh Supreme manual, J1 on the controller is 5v, J2 is 12v.

Keep in mind, that power supply board is probably not manufactured by Mikohn. most companies outsource generic boards like power supplies, and those voltages are pretty stadard for power supplies.

<edit>

Found the pinout for the Mikohn power suppy, note the lack of wires connected to the -12v row:

* mikohnps.JPG (80.75 KB, 914x615 - viewed 470 times.)
« Last Edit: December 13, 2009, 06:23:15 PM by brichter » Logged
Thanks,
Bill
cadillacpro
Guest
« Reply #2 on: December 13, 2009, 09:57:20 PM »
Guess I got you started on this one. Test it correctly (or say incorrectly) you can get your meter to read 17 volts Scratch Head. I wasn't dreaming that up sleep
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: December 13, 2009, 10:03:46 PM »
I know... rotflmao
The only way I can possibly get +17Vdc is to put the multimeter on a red and purple wire.
I get a -17Vdc if the multimeter is on the red and yellow wires.

I thought the red and black were supposed to be +12Vdc if when using a multimeter,
you stick the common lead on black and the red lead on red?
The picture brichter is showing from the supreme manual contradicts that.

Notice my power supply shows purple on top row. Yellow on second row.
Black in 3rd row and red on the bottom row.
Logged
cadillacpro
Guest
« Reply #4 on: December 13, 2009, 10:06:45 PM »
Did you get the pictures of my other project? Should post them here in other interests. yes
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: December 13, 2009, 10:09:42 PM »
Yes, I will try to post them up in your other thread...
It came out great!
Logged
cadillacpro
Guest
« Reply #6 on: December 13, 2009, 10:14:47 PM »
I meant the high voltage ones I sent today.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: December 13, 2009, 11:26:05 PM »
Holy Craps!!! Young Frankenstein!! Hail

* IMG_0195.jpg (434.9 KB, 576x768 - viewed 457 times.)

* DSCF4317.jpg (834.38 KB, 1024x768 - viewed 427 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: December 13, 2009, 11:28:26 PM »
More Shocking Pics!!!

* IMG_0197.jpg (686.14 KB, 1024x768 - viewed 439 times.)

* DSCF4318.jpg (853.54 KB, 1024x768 - viewed 452 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: December 13, 2009, 11:30:18 PM »
Really cool picture!!!
That's one heck of a power supply!!! Tongue Out

* DSCF4319.jpg (698.62 KB, 1024x768 - viewed 421 times.)
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #10 on: December 13, 2009, 11:50:43 PM »
That looks like it is the electrician's form of "pyromania!!!!"

 lightning bolt lightning bolt lightning bolt lightning bolt lightning bolt Wicked Cool! lightning bolt lightning bolt lightning bolt lightning bolt lightning bolt

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
cadillacpro
Guest
« Reply #11 on: December 14, 2009, 12:34:21 AM »
120 volts feeding (4) 15,000 volt 30Ma Neon Sign transformers hooked up in parellel for 120Ma. Stepped up thru 64 Capicitors dual spark gap and 15 turn primary winding to a 1600 turn secondary winding. Estimate stats put it a aouut 1.3 million volts output.  Not sure how many jiggi-watts Scratch Head Longest spark to date is 74 inches to a grounding rod.

ANd this is the little one. My other is 6 feet tall. Crazy
Logged
westec1
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 36
Offline Offline

Gender: Male
Posts: 263
« Reply #12 on: December 14, 2009, 11:38:59 AM »

SHOCKING rotflmao bust gut laughing Cry Laughing

Looks very cool yes
Logged
Wes propeller
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #13 on: December 14, 2009, 12:08:51 PM »
That is one big Tesla coil to have lying around the house!  lightning bolt lightning bolt
Let me guess, do you have a Faraday cage in your basement?  Crazy bust gut laughing bust gut laughing bust gut laughing

Seriously, it looks like a WardLabs DRSSTC. Did you scrounge the parts yourself or buy them as a kit?
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #14 on: December 14, 2009, 03:16:30 PM »
Hmm, Mikohn power supplies to Tesla Coils... interesting tangent.


Now we just need to figure out how to get the arcs to display the progressive amount...
Logged
Thanks,
Bill
rotornaut
Guest
« Reply #15 on: December 14, 2009, 03:43:06 PM »
Stayouttadabunker was that a custom? Did you have to make your own capacitors? I've see those were guys had to build there own caps using 5 gallon buckets as the case. Is the EMP noticeable, (does it ruin all your neighbors TV, cell and radio reception when its on)? Tesla was the man...
Logged
cadillacpro
Guest
« Reply #16 on: December 14, 2009, 03:48:22 PM »
Built from scratch, some pieces were bought online. No faraday cage..thats why it is outside. But I have no problems with bugs in my back yard. Cry Laughing Or neighbors for that matter Tongue Out
Logged
cadillacpro
Guest
« Reply #17 on: December 14, 2009, 03:57:25 PM »
I have two RFI/EMF filters on the source, caps are store bought Cornell-Dubillier-942C20P15K-F 0.15MFD @2000 volt
Logged
rotornaut
Guest
« Reply #18 on: December 14, 2009, 04:08:41 PM »
The coolest this about Tesla coils is the Electro Magnetic Pulse it throws out as a byproduct. Be careful that will kill your Cell phones or any other small circuitry that is not shielded. I'm not sure of the range of the EMP coming out of one that size but I would imagine 15-20 feet or so. That's not an easy thing to measure though. I know you can't have one of those that's over 6 foot tall near an airport, the FAA will get pissed over the EMP threat. Fun stuff.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #19 on: December 14, 2009, 05:36:13 PM »
Tell you what, that would be one hell of a cattle prod or stun gun...LOL
Logged
SAT (aka GANDHI)
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 224
Offline Offline

Gender: Male
Posts: 807
« Reply #20 on: December 15, 2009, 12:36:46 AM »
Quote from: rotornaut on December 14, 2009, 04:08:41 PM
That's not an easy thing to measure though.

You can ALWAYS put your tongue!! 
Logged
Keep it simple!!!
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #21 on: December 15, 2009, 02:14:20 AM »
A buddy of mine made one in highschool. He used an Iron Shotput at the top.
It was cool that you could draw a spark out with your finger to about 3ft.
It left a little black mark but other than a slight buzzing sensation didn't hurt.
Logged
The only way to beat the casino is to own it
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #22 on: December 15, 2009, 02:25:21 AM »
Quote from: cadillacpro on December 14, 2009, 12:34:21 AM
120 volts feeding (4) 15,000 volt 30Ma Neon Sign transformers hooked up in parellel for 120Ma. Stepped up thru 64 Capicitors dual spark gap and 15 turn primary winding to a 1600 turn secondary winding. Estimate stats put it a aouut 1.3 million volts output.  Not sure how many jiggi-watts Scratch Head Longest spark to date is 74 inches to a grounding rod.

ANd this is the little one. My other is 6 feet tall. Crazy

   How in the world did I miss THIS thread !!!.....  Scratch Head  ALLSOME work there! .....  K+ good to see we still have some crazies (expermenting electronics tecks) left in this world !  arrow 

THANKS for the PICS !  applause
Logged
My CAT is smarter than your honor student  !!!
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #23 on: December 15, 2009, 09:27:39 AM »
You can find all kinds of information, schematics, and pictures through Google.

I thought these were cool..

* SteveWards-1.JPG (157.02 KB, 1024x768 - viewed 411 times.)

* tesla-coil-sg-75.jpg (14.79 KB, 360x270 - viewed 482 times.)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #24 on: December 15, 2009, 07:15:22 PM »
Yikes!  Weird Eyes What if that came flying at ya?
I wouldn't wanna be anywhere near that sucker!!!
Logged
Pages: [1] 2 3 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.093 seconds with 20 queries.