New PE Plus manual

Standalone Progressive in the SET CHIP set up of the machine.

PURPOSE OF THE SET CHIP
This set chip serves two purposes: (1) to upgrade game options and meters to the most current format; and (2) to set options for programs already in the most current format.

USING THE SET CHIP
Turn the machine power off. Remove the old game chip. Install the set chip. Turn the machine power on. Credits window = set chip version. Winner Paid window = any tilts detected during power up.

65_3 Advisory Message: If the set chip determines that the game options and meters can be upgraded to the most current format, Winner Paid window = 65_3. Turning the jackpot reset key automatically upgrades the game options and meters to the most current format, and allows the set chip to be used to modify the options listed in this document. Please note that turning the jackpot reset key upgrades the game, which may no longer be compatible with the old game data format (i.e., if reinstalling the old game, data may not be restored without losing game options and meters).
Turn the power off. Remove the set chip. Install the new game chip.

65_4 Advisory Message: When upgrading an old program, if the set chip is unable to upgrade the game options and meters, Winner Paid window = 65_4. The new game must be installed before the set chip can be used. Please note that all game options and meters will be lost when installing the new game.
To clear this tilt, turn the power off. Remove the set chip. Install the new game chip. Turn the power on, clear all tilts, and turn power off. Remove the new game chip. Install the set chip. Turn the power on. Use the set chip to set options. Turn the power off. Remove the set chip. Install the game chip.

SET CHIP OPTIONS
Press the self test button to step through the set chip option pages. To change an option setting, press the Spin Reels button. The numbers appearing below enclosed in < > represent the page number, [ ] represent the option number, and { } represent the setting.
NOTE: After any change has been made, save the option(s) by stepping through to the last page and exiting or by pressing the Bet One Credit button.
NOTE: If not supported by the game, set chip option settings are ignored.
Accounting System
Communication Type   Options are none {0}, Bally MISER {1}, or IGT SAS {2}.

SAS Communication
Address <0>   When using the SAS protocol, a machine address is required to distinguish one machine from another. The valid address range is {001} to {127}.
NOTE: SAS is not enabled if the address is zero.

Bill Pay Mode <0> [8]   Determines how inserted bills are paid. Options are bill pay mode is fixed to changer only and cannot be changed in self test {0}, or bill pay mode is self-test selectable {1}.

Bill Acceptor <0> [9]   Options are enabled {1} or disabled {0}.

Coupon Capability or EFT <0> [11]   If the communication type is MISER, this page determines whether the coupon capability is enabled {1} or disabled {0}. If the communication type is SAS, this page determines whether EFT is enabled {1} or disabled {0}.

Country Code <0> [30]   This page is not displayed if the bill acceptor is disabled. Determines the country code associated with the bill acceptor. Options are United States {37} or Canada {7}.

Progressive Selection <0> [31]   Options are none {0}; primary-level link, secondary-level link {1}; primary-level link, secondary-level standalone {2}; primary-level standalone, secondary-level standalone {3}; and primary-level standalone, secondary-level link {4}.

Progressive Levels <0> [35]   Options are one progressive level {1}, or two progressive levels {2}.

Jackpot to Credit <0> [43]   If the communication type is MISER, this page determines whether jackpots can be directed to the credit meter. Options are enabled {1} or disabled {0}.

Progressive Type <0> [60]   Options are high/low {0}, or alternating {1} progressive. The progressive level must be set at {2} for high/low progressive.

SAS Progressive <0> [63]   This page is not displayed unless the SAS communication address has been set. Determines whether the SAS progressive is enabled {1} or disabled {0}.

NOTE: When this option is changed from enabled to disabled, the progressive option selection defaults to both levels link progressive and the progressive type defaults to high/low.

SAS Bonusing <0> [64]   This page is not displayed unless the SAS communication address has been set. Determines whether SAS bonusing features are enabled {1} or disabled {0}.

Denomination <6>   Determines the game denomination. The Credits window displays the current denomination, in cents. The Winner Paid and Credits windows display denominations larger than $50.00.

Setup <9>   This setup is displayed only if at least one progressive level is specified as standalone.
Press the self test button to advance from one standalone parameter to the next.
To select the digit to be changed, turn the jackpot reset key.
Press the Spin Reels button to increment the value of the currently selected digit.
Press the self test button to save selected parameters.
Upper portion of progressive display unit = amounts and data for the primary standalone progressive award.
Lower portion of progressive display unit = amounts and data for the secondary standalone progressive award.
Primary-level parameters are progressive reset amount [1], maximum progressive amount [2], progressive increment percentage [3] (FYI .. 004.00 = 1 cent per coin), and current progressive amount [4].
Secondary level parameters are progressive reset amount [5], maximum progressive amount [6], progressive increment percentage [7], and current progressive amount [8].