coin mech wire identification

[jeddybear]

hey fellas, ive got a coin mech quarter acceptor, can anyone identify the wires for me? thanks for your help.

[slotsteve]

jump the grounds too each comm on swicth and hot wire to n/o on coin swicth

[jeddybear]

i apologize for not being clear the first time , i want to know the purpose of each wire. thanks for answering slotsteve.

[stayouttadabunker]

I think you look it up at the Coin Mech co. website which is
located on the right hand side of the homepage.
You'll need to know the model number.
I think yours is a "130" model.
On that website, there may be some info regarding the connector pinouts
for your coin mech.

ok, ok....lol...here's a link>>>>

http://www.coinmech.com

[jeddybear]

thanks for the link, they have nothing for this model, maybe a little too old.

[slotsteve]

Forget about the plug  you only need to use 2 wire from coin switchs, tie both comm/ gd on coin sw together and both  n/o coin in, you,ll be in biz  you don,t want or need coin door light or slam tilt

[jeddybear]

ok, thanks for your help

[jeddybear]

if i did want coin door light, is that 5 v's?

[slotsteve]

depends on blubs 47,44 are 6 v but will work on 5v