Brain Teasers β I have one for you (Which I do not have an answer for β YET)
Have a 19β krotek KT1903N monitor that was working in an IGT slant top game on the casino floor. It had retrace lines, so C504 222uF 35v and C506 47uF 50v caps were replaced.
1) Tested in shop (Works, has a good picture)
2) When the monitor is return to the casino floor β it will not power up.
(Unable to find the machine the monitor came out of β but they are all the same?)
Note: tried in 4 different games β on 4 different banks (will not work). But works fine in the shop tester, which is the IGT 960 tester. No different then the games on the casino floor.
First thought β plug line up and or loose pin.
Pins are all good.
Used an extension cable on casino floor to insure the plugs were seated correctly.
Still donβt work.
The same set up used on the 960 tester β the monitor works fine.
Then thought β Power
Maybe the casino floor is running on low voltage β but testing the monitor on the tester.
Was able to drop the voltage down to 66volts, which at that I lost the game and monitor.
The casino floor is not that lowβ¦
Anyone seen this before? Any one have a thought of what Iβm missing?