Welcome, Guest. Please login or register.
November 01, 2024, 03:24:09 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S2000 bottom speaker connection
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S2000 bottom speaker connection  (Read 2179 times)
IFFV68
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 32
Offline Offline

Gender: Male
Posts: 784



« on: July 14, 2010, 03:04:52 PM »

I had the terrible noise when the reels spun.
Replaced the board, 504-b & added the top two resistors. Everything worked, no noise.

I disconnected the speaker to take out hopper to count coins. Then reconnected the bottom speaker. Turned on & played the Machine. Noise & static returned.  What happened?
 I rested the speaker outside the machine and wiggled  wires. nothing different happened.
There are two sets of connections on the bottom speaker. Two on the left & two near the right. I noticed I had both wires on the left two terminals. I took one speaker wire & connected it to the terminal on the right, one on the left. They are not marked + or -.
Played the machine, BINGO, the sound returned back to the stereo  sound, clear as a bell.

Could this be some of the problems that others, including myself have had with their S2000 reel spin noise.
I hope this may help someone.

I.F.F.V.68
Logged
stormrider
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 131
Offline Offline

Gender: Male
Posts: 772



« Reply #1 on: July 14, 2010, 09:11:57 PM »

I had the terrible noise when the reels spun.
Replaced the board, 504-b & added the top two resistors. Everything worked, no noise.

I disconnected the speaker to take out hopper to count coins. Then reconnected the bottom speaker. Turned on & played the Machine. Noise & static returned.  What happened?
 I rested the speaker outside the machine and wiggled  wires. nothing different happened.
There are two sets of connections on the bottom speaker. Two on the left & two near the right. I noticed I had both wires on the left two terminals. I took one speaker wire & connected it to the terminal on the right, one on the left. They are not marked + or -.
Played the machine, BINGO, the sound returned back to the stereo  sound, clear as a bell.

Could this be some of the problems that others, including myself have had with their S2000 reel spin noise.
I hope this may help someone.

I.F.F.V.68

Why would you even need the resistors up top with a 504-b mpu
that is the whole reason for getting that board.

When you pull the coin tray the speaker lifts off with the tray and it's connected via the molex plug
on the back of the coin tray....no need to mess with the wires...but for whatever reason
you had to pull wires off it's always good to write stuff down or mark the wires first then guess at it.


Could this be some of the problems that others, including myself have had with their S2000 reel spin noise. NO and NO




Tim

 
Logged
IFFV68
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 32
Offline Offline

Gender: Male
Posts: 784



« Reply #2 on: July 15, 2010, 07:59:09 PM »

When I got my machine from Rocky Mtn. Slots, the bottom speaker wires were cut & spliced with a longer piece of wire. No Molex connector.
Since the machine made a horrible static noise & reel spin noise I was sent two resistors for the top two speakers. They took out the static noise but did nothing towards the Reel Spin noise. That is when they sent me a 504-b Board. After installing that it worked OK.
Then it didn't work. That's when I noticed the bottom speaker wire was installed incorrect. installed wire connectors far apart on bottom speaker & BING, it works.

thank you, I know what you mean but it didn't come that way.
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585



« Reply #3 on: July 15, 2010, 10:45:16 PM »

If you look at the speaker you will notice the two terminals on the left are connected together and the same on the right.  So putting both wires on the left side is the same as putting the wires together and as far as the correct polarity (positive & negative) not much difference at such low wattage.

The molex speaker plug did not seem to be the best and have seen many of people just run the wires straight to the speaker.
« Last Edit: July 15, 2010, 10:52:04 PM by Railroad94 » Logged
IFFV68
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 32
Offline Offline

Gender: Male
Posts: 784



« Reply #4 on: July 16, 2010, 01:40:13 AM »

I wonder if some of theS2000 noise problems are due to the bottom speaker being connected incorrectly?
I guess probably not because so many are having  issues with their machines. This is my first S2000 & I really like the features.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.103 seconds with 20 queries.