Welcome, Guest. Please login or register.
November 01, 2024, 03:20:37 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S 2000 ???????????????????????
0 Members and 13 Guests are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: S 2000 ???????????????????????  (Read 12135 times)
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« on: July 19, 2010, 12:42:30 AM »

I'm kind of stumped on this one, after about 6 hours I decided to take key board in hand. I have 4   S 2000 I'm trying to install coin handling. All I get is Coin in error on all 4 of them.   I have 1 machine (S 2000) that does except coins, I have been using it as a test stand. That said all the parts and wiring looms I have been using are known GOOD. I wrote down all the key settings on the working machine, and compared them to the other machines and they are exactly the same. I even went so far as to switch the MPU board, from the working machine, didn't make any difference.  Let me be clear, all 4 machines are working machines, they just will not except coins. Drop a coin in, it goes to the hopper and gives a coin in error, open and close door  clears error.  Help Help
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #1 on: July 19, 2010, 01:08:46 AM »

Try moving the comparitor and optics from the working machine to one of the others and make sure you have coin deflector plugged in. other than that check the coin denom setting on the machine
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #2 on: July 19, 2010, 01:17:52 AM »

what type of clear did you perform.  the e square or whatever they call it when I'm not , well it needs to be cleared too.///

w
I will likely ma
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #3 on: July 19, 2010, 01:27:48 AM »

Buzz,
Do you have a different clear chip to try?
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #4 on: July 19, 2010, 01:44:29 AM »

Try moving the comparitor and optics from the working machine to one of the others and make sure you have coin deflector plugged in. other than that check the coin denom setting on the machine


Been there and done that. Take everything out of the good machine and will not work in the other machines. I'm working with 5 comparitor brackets, 5 comparitors, 5 coin optics, and 5 wiring looms, all have been tested in the working machine and all are GOOD. The Green light does come on on the Comp. and it will send the coin to the hopper, that's when I get the CALL ATTENDEANT Coin In Error   Another thing even on the good machine, if I press the little white button on the coin optic board, it will NOT add a credit.
 Accounting set at  .01  coin denom set at .05  multi-denom set at .05, .25, .50, and one dollar. deflector is plugged in.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #5 on: July 19, 2010, 01:52:50 AM »

The only clear I've done is with a 097  I think that's the only clear chip I have. I just took a look I have a 006 and a z clear. I've never had to use them. 
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #6 on: July 19, 2010, 01:59:30 AM »

I don't know if this helps you at all Buzz,
but when I press the little white button on the coin-in optics on my S2000 -
I don't get any credits onto the display meter either.  Scratch Head

I do get the coin-in error when I try the "Service Coin" button while the
door is open and the cherry switch plunger is fully pulled.
I think that's normal however - the machine is sensing an abnormal action.
I clear this error just by closing the door.
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #7 on: July 19, 2010, 02:02:01 AM »

By chance is this a 504 board?  What is your hopper limit set to?  Dumb questions I know...but were heading in a direction here.
Logged

If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #8 on: July 19, 2010, 02:13:32 AM »

Jim the working machine is a Big Time Pay, it had a 504 board in it to start with, I switched it with a 502. The 502 works in the BTP but the 504 will not work in the other machines the rest of the boards are 502s. Hopper is set for 100
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #9 on: July 19, 2010, 02:20:59 AM »

Jim I need to add something else, three of these machines have a S+ SS chip in them.  I'm using a SB001000 Base chip.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #10 on: July 19, 2010, 02:38:21 AM »

After you did your full clear and then did your key chip and went into settings, by chance would you have messed around with the "coin-less mode" settings?  Can you press the test button and work your way through the menu and get to the Key Chip settings...see what it says about coin-less mode and whether or not it is enabled or disabled.
Logged

If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #11 on: July 19, 2010, 02:42:41 AM »

Disabled
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #12 on: July 19, 2010, 03:01:17 AM »

Just for kicks and giggles, can you take the working board from the working machine that is accepting coins from the "test stand" and put it into one of the questionable machines and see if it will then accept coin.
Logged

If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #13 on: July 19, 2010, 03:07:43 AM »

Jim  I'm ahead of you I've already tryed that. The 504 was in the good machine, the good machine now has a 502 board and the 504 will not work in the other machines. The 502 works fine in the good machine.  Hell one of the machines in question, I didn't even want to make it coin handling, but it didn't have a SS chip in it so I gave it a try.

AT one time tonight I had a Sierra Silver machine yelling BIG TIME PAY
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #14 on: July 19, 2010, 03:21:05 AM »

Buzz,
   I'm enjoying the nightlife at the cottage but I believe you may need to use a different clear chip.  I guess I assumed that you already swapped all of the components since your first post said that, but did you swap the board from the working game with the set of chips intact or change out the chips? 

Thanks,
Wayne
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #15 on: July 19, 2010, 03:22:07 AM »

I almost forgot to ask what the chip numbers are?
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #16 on: July 19, 2010, 03:32:25 AM »

Wayne I had to switch the chips. The working machine is a 3 Reel plus a bonus reel (Big Time Pay) the troublesum machines are all 3 Reel. I now have a IVO224 clear, I can give it a try.
 Last weekend I gave my Brother in Law a 3 reel and all I did to it was install a coin head, Comp bracket, optics and It was good to go. Matter of fact it went all the way to FT. Smith, Arkansas
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #17 on: July 19, 2010, 03:38:25 AM »

224 is best choice for a 504 followed by a 45 key.
Logged

If life is like a box of chocolates....why do I always seem to end up with the butter creme?
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #18 on: July 19, 2010, 03:42:56 AM »

I'll grab another refreshment then check back. 

W
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #19 on: July 19, 2010, 03:53:26 AM »

Well I did a 224  with a key 31  let me make a 45 and try it.  Well I started with a 17 and set Machine type as upright but after I left key menue I had a Miss match so went back to a key 31 and got it play, still would not take a coin. Well it takes it but tilts.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #20 on: July 19, 2010, 04:05:19 AM »

what are the game chip numbers?  did you swap the IO boards?
w
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #21 on: July 19, 2010, 04:25:38 AM »

Wayne  SB001000   SG000363   VS011GX1   SS 4614

I did a 224 clear and 45 key It didn't help   
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #22 on: July 19, 2010, 04:42:55 AM »

silly question perhaps but is the coin the correct size for the block/guide?
w
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #23 on: July 19, 2010, 04:44:41 AM »

Wayne  SB001000   SG000363   VS011GX1   SS 4614

I did a 224 clear and 45 key It didn't help   

Key Chip The key chip is required to change some game options, such as the denomination. The
key chip is a 27C4002 or a 27C240 device and is labeled with the key chip number
KEY00031.
Clear Chip This IGT utility program enables the operator to clear the game memory. Use
IVC00223 (or replacement) to clear RAM or use IVC00224 (or replacement) to clear
RAM and EEPROM.
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #24 on: July 19, 2010, 05:32:26 AM »

Wayne   I have a Key 17, 31, and a 45.   Clear keys I have a 097 and a 224   Every one seems to do the job, I do a clear with which ever one (97 or 224) in key menu I have to reset every setting, this makes me think that it cleared.  All 3 key chips will take me to key menu, this makes me think any and all of them are working.  The front display tells me to insert coin, I do and it gives coin in error, if by chance a coin doesn't go to the hopper but rejects to the tray I don't get the error.
 The guide is the right size, heck I've had 5 different sets of optics in that one machine. All of them couldn't be wrong.
 I'm beginning to think the Casino must have cut a wire somewhere. Looks like I can spend the day tomorrow with my handy dandy multi-meter.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.125 seconds with 20 queries.