Welcome, Guest. Please login or register.
November 23, 2024, 12:08:59 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Demensions and wattage of lower flourescent light		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Demensions and wattage of lower flourescent light  (Read 6021 times)
golflover
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 41
Offline Offline

Gender: Male
Posts: 263
« on: August 17, 2010, 09:04:48 AM »
Hey all have what I hope is an easy question.     My lower fluorescent bulb was out on my 5500 Blazing 7's. When I removed the bulb, which must have been old, all the markings on the bulb were worn off. I think it might be 8 watts but want to make sure. Also my choclate lab being playful thought it was a retrieval stick and knocked it out of  my hand when I was holding so now I need the length also.   Thanks as always!
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: August 17, 2010, 11:48:26 AM »
You want to use any fluorescent tube that has F15T8 written on it.
Get the cool whites if possible.
They are roughly 17" inches long.
Logged
golflover
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 41
Offline Offline

Gender: Male
Posts: 263
« Reply #2 on: August 17, 2010, 11:50:55 AM »
Thanks Bunker, figured you would know  Hail applause yes
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #3 on: August 17, 2010, 12:53:21 PM »
It also might not have been your light (albiet post Lab it does need a replacement).
I had a light in similar condition (Pre - Choc Lab of course - my cats don't play fetch well)
When I replaced it the light did not come on. I presumed it was voltage or a dud and got another.
Turned out it was the starter. Its a small cylindrical looking silver doo-dad that is in the supply that feeds the light.
They look permanently affixed but a gentel push and a twist and they pop right out.
I picked up new ones at Home Depot. (Caution they are small enough to be swallowed whole by the dog).
Logged
The only way to beat the casino is to own it
golflover
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 41
Offline Offline

Gender: Male
Posts: 263
« Reply #4 on: August 17, 2010, 01:03:11 PM »
Thanks Jay..

Yeah I thought maybe starter also.. Went and bought a couple and replaced it before I started taking it apart. Light didn't fire up so then removed the bulb. While looking at it before Boozer decided to customize it, it was darker on the one end, so i figure it was blown. that was when i discovered no writing on the bulb. but now either way I need the bulb.. Will keep everyone updated..
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: August 17, 2010, 01:12:51 PM »
Here's an example of what we're talking about just in case
people are wondering...lol >>>

* FS-5 Fluorescent Starters.jpg (50.37 KB, 1025x795 - viewed 266 times.)
Logged
golflover
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 41
Offline Offline

Gender: Male
Posts: 263
« Reply #6 on: August 17, 2010, 01:31:41 PM »
is that a stock photo Bunker or you must have alot of time on your hands today Smiley
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #7 on: August 17, 2010, 01:40:48 PM »
I think the bulb is 15 watts. I want a CCFL replacement for the old bulbs for My machines.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: August 17, 2010, 03:14:15 PM »
hmm...
edited>>>I have an 15 watt fluorescent bulb behind my 5500 belly display glass as well.

Time on my hands? lol
Tee-time is more like it!  Golf Smiley
« Last Edit: August 17, 2010, 03:39:05 PM by stayouttadabunker » Logged
golflover
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 41
Offline Offline

Gender: Male
Posts: 263
« Reply #9 on: August 17, 2010, 03:27:04 PM »
Quote from: stayouttadabunker on August 17, 2010, 03:14:15 PM
hmm...
I have an 8 watt fluorescent bulb behind my 5500 belly display glass.

Time on my hands? lol
Tee-time is more like it!  Golf Smiley

Hmm prolly not enought Bunker, you didn;t inlude the demisions... rotflmao Crazy
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #10 on: August 17, 2010, 03:46:56 PM »
By the way...the word you're trying to say sir is: "Dimensions"   Pointing lol Shifty

( just kidding around ...  Crazy )

* F15T8CW.png (29.44 KB, 555x414 - viewed 321 times.)
Logged
golflover
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 41
Offline Offline

Gender: Male
Posts: 263
« Reply #11 on: August 17, 2010, 04:10:57 PM »
Quote from: stayouttadabunker on August 17, 2010, 03:46:56 PM
By the way...the word you're trying to say sir is: "Dimensions"   Pointing lol Shifty

( just kidding around ...  Crazy )




hmm tomatoe tomatoe..lol... I never remember to hit the spell check...i have fast fingers..lol
Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #12 on: December 13, 2010, 11:34:10 AM »
If I can make a suggestion, being in the electrical field I deal with lighting daily.  I typically yank out the magnetic core and coil transformers and install a workhorse ballast made by Fulham.  They are electronic so you can do away with the starter.  They do not hum and are instant on.  You can use 1 ballast for any combination of lamps as long as you choose the correct one.  You would be surprised on how quiet your machine will be after the retrofit.  I typically attach them with double sided tape since they weigh almost nothing.

* WH.jpg (12.77 KB, 250x192 - viewed 449 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: December 13, 2010, 01:26:19 PM »
Can these ballasts support continuous switching on and off for a few minutes?
It would be neat to have a top box light and the topper light go nuts when
a jackpot is hit using a relay off of the bell output instead of a bell.

I prefer a quieter happiness...lol
Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #14 on: December 13, 2010, 02:32:25 PM »
Yes they can but the problem is the bell itself makes and breaks the circuit so you would have to use a flasher/timer.  Omron makes many different styles.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #15 on: December 13, 2010, 02:55:50 PM »
Quote from: SLOTMAN on December 13, 2010, 02:32:25 PM
Yes they can but the problem is the bell itself makes and breaks the
circuit so you would have to use a flasher/timer.  Omron makes many different styles.

Awessome!! That's the answer I was looking for!
I couldn't do it before because the ballasts take so long to start up.
Your suggestion of replacing the older ballasts with these ones appear to be the answer!

I have various Omron relays and flashers...
I just need to find one that will work off of the Bell output.
I will check the bell output and see if it's a continous steady output
voltage while the machine is in "handpay" mode.

Thank you so much for your reply slotman!

ps
By the way, you've spelled the word "dimensions" pretty much
the way a lot of people actually pronounce it...lol  bust gut laughing CoolChicken

That's okay, I've always though "lobotomy" was pronounce as "Low-boh-toe-me"  lol
« Last Edit: December 13, 2010, 03:01:44 PM by stayouttadabunker » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.112 seconds with 20 queries.