Welcome, Guest. Please login or register.
November 28, 2014, 04:54:18 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Monitor Repair Log and Database. **Arcade and Gaming**
| |-+  Monitor Repair Tech Support
| | |-+  Schematic for neotec 2702, 3602, and 3501
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Schematic for neotec 2702, 3602, and 3501  (Read 6716 times)
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« on: September 16, 2008, 02:02:51 AM »

Started by Amusement Repair -


Can anyone post these.  I would appreciate it.

Thanks
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #1 on: September 16, 2008, 02:03:19 AM »

By Cactusjack -


I have it only in hard copy.  That is the only way Neotech has it too.  I have no way to scan it.

If no one else comes through, I can snail mail you a copy of NT-2700(1)(2) and NT-2702A.

CJ
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #2 on: September 16, 2008, 02:03:48 AM »

By Amusement Repair -


Thanks I will wait and see who else can come through.  These chassis are very easy to repair, but I would like a schem for reference.

Thanks
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #3 on: September 16, 2008, 02:04:14 AM »

By channelmanaic -


Hey CJ,

We have a great print server at work that I can send a job to and it sends me back a .pdf file... so if you can scan it, send it my way and I'll .pdf it.

RJ
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #4 on: September 16, 2008, 02:04:41 AM »

By kbert -


Has anyone posted this schematic, I'm in need of the NT-2701 to try to fix my monitor.

Thanks
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #5 on: September 16, 2008, 02:05:03 AM »

By Amusement Repair -


I dont think its posted, but you can call Neotec at 909-626-9889. Ask for service and the guy there can fax it to you.  Whats wrong with yours and maybe we can help you here.

Thanks

S J K
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #6 on: September 16, 2008, 02:05:26 AM »

By kbert -


The problem with my NT-2701 is that it won't power up.  I get nothing when I plug it in, no static, no noise, nothing.  I've checked the fuse and it is good. Voltage is getting to the monitor, checked it at the fuse.  I don't see a test pin for the B+ voltage, found the adjustment for the B+ voltage, just no place to check it.

Any ideas?

thanks,

Ken
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #7 on: September 16, 2008, 02:05:42 AM »

By Jay -


Sounds like the CPU board is not getting its power. My analogy is that you have Video1 going but no disk in the DVD player...
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #8 on: September 16, 2008, 02:06:05 AM »

By Cactusjack -


How much monitor board repair experience do you have?

This type of monitor board uses a switching power supply.  It is normal procedure to isolate the power supply (lifting B+ from the rest of the monitor) and try powering a 55-60 Watt Incandescent light bulb as a dummy load.  This will allow you to test the B+.  And helps to determine if the problem is a power supply problem or a deflection problem.

That would be the starting point if the switching power supply made no sound, or was ticking or chirping like a bird (which would indicate either a P/S problem or a no-load or over-load situation on the other half of the monitor (deflection).

CJ
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #9 on: September 16, 2008, 02:06:27 AM »

By kbert -


I've done some more testing by using the NT2515 schematic, which looks very close to the nt2701.  Found a place to measure the B+  (off of pin 2 from the flyback) and was able to max adjust the voltage to 112.5 volts (up from 105).  I think it needs to be 125+.  The screen is squashed to the middle (Horizontal left and right 4" show nothing).  The last monitor that I had a low B+ voltage on was because the big cap was bad (c104 on the nt2515 schematic).  I'm thinking that this may also be my problem with this one.

Ken
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #10 on: September 16, 2008, 02:06:46 AM »

By Cactusjack -


You might be right.  It is difficult to tell from one board to another as the Cap #'s don't seem to match the schematics. If your monitor has the add on board on the side, that is where most of the deflection caps are (the high voltage ones).  There is also a Bipolar cap that almost always goes bad there (5.6 or higher at 50V).  That will cause no horiz width adj.

Here are some other things from my notes on various ones related to Neotec

NT-2702A (not 2702) C407 0.68ufd @ 400V
NT-3501 C423 0.94ufd @ 400V

For a standard 2701, check the caps around C419, 420, 421.  I am starting to see C423 burn up now (563/250V) it is actually for the ground on the secondary side of the flyback.  On the ones that have failed, it is located in front of the Vertical Driver IC (heat sink).

CJ
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #11 on: September 16, 2008, 02:07:09 AM »

By kbert -


An update for all those who may have a simular problem with a monitor.  I did a cap kit, replaced IC501 and Q501 and had the same problem, but the picture was nice and bright.  I checked out the caps C419, C420 and C421 which looked good, so I started thinking that the problem may not be on the board.  I had another monitor (without chassis which was a nt-2701) which I decided to check out the yoke.  I compared that ohm reading of the yoke to the readings on the current monitor and they were different.  Once I moved the chassis to the other monitor, everything works fine.  So my problem was the yoke on the monitor having a higher ohm reading which means that it had the wrong chassis.

Thanks for everyones help.

Ken
Logged
racergiant
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 105
Offline Offline

Gender: Male
Posts: 321



« Reply #12 on: September 16, 2008, 02:07:36 AM »

By pinshoppe@aol.com


I have schematics for the NT-3501 if anyone would like them in pdf form.  -Mike
Logged
frep420
Guest
« Reply #13 on: February 22, 2010, 11:05:06 PM »

Please fwd the pdf or link to me. I have 3 chassis, two tubes and at least one bad flyback.

JFBArcade@gmail.com

Thanks!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2014


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.281 seconds with 20 queries.