Welcome, Guest. Please login or register.
April 28, 2024, 07:25:31 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Display nexplex link down error		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Display nexplex link down error  (Read 16254 times)
idylewild1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 140
Offline Offline

Gender: Male
Posts: 591



WWW
« on: November 17, 2008, 02:43:30 AM »
Have a S2000 with the error message "display nexplex link down".  When the machine is turned on the display says display passes self test and then displays error message. Machine won't go into self test mode. Any help would be appreciated.
Logged
idylewild1

http://samronslots.com/
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: November 17, 2008, 03:05:44 AM »
Could be simple as a loose connection.
Suggest that you check every connection to the motherboard, door I/O, cabinet i/o, power supply (behind reels if upright cabinet)

My S2000 did the same thing when I first got it.
I went through every connection at the motherboard, door and cabinet i/o, vfd.
Verified the Base, Game, Version, VFD, and SS eproms.

WCW1223 has suggested in the past to try running the machine without the LED display connected.
Leave the VFD display connected.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #2 on: November 17, 2008, 04:36:39 AM »
Hello!

I thought I remember reading something about this error having to do with the power supply behind the reels.  I don't remember where I read it...this sound familiar to anyone else?

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #3 on: November 17, 2008, 04:52:19 AM »
It could be the power supply, or a loose connection at the power supply.

My S2000 will intermittently have the same issue, powering it off and then on after 15-30 seconds and its fine.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
onesell
New NLG Member 1 to 100 Post
**

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 49
« Reply #4 on: November 17, 2008, 07:47:06 AM »
I have had this a few times and it has always been the power supply behind the reels not seated properly.

Richard
Logged
idylewild1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 140
Offline Offline

Gender: Male
Posts: 591



WWW
« Reply #5 on: November 17, 2008, 11:46:03 AM »
Thanks for the input will try today.
Logged
idylewild1

http://samronslots.com/
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #6 on: November 17, 2008, 12:58:02 PM »
Could be one of the following

1 ) Power Supply
2 ) MPU Board and or EPROMs (Check for a red light)
3 ) Pinched Cable (Ground out) - This usually causes the game to keep resetting

That is a good start....
Logged
idylewild1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 140
Offline Offline

Gender: Male
Posts: 591



WWW
« Reply #7 on: November 17, 2008, 08:04:12 PM »
The power supply was loose and when tightened it fixed the problem. Thanks for all the help and input. A great place to get help and learn things.
Logged
idylewild1

http://samronslots.com/
onesell
New NLG Member 1 to 100 Post
**

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 49
« Reply #8 on: November 18, 2008, 08:06:19 AM »
Nice one I'm pleased it's fixed and amazed that knew what was wrong with it.
Logged
rjpohl
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 103
Offline Offline

Gender: Male
Posts: 726



WWW
« Reply #9 on: November 23, 2008, 10:51:18 PM »
I have 2 power supplies that are bad, does anyone know what is generally wrong and how to repair?
Logged

http://samronslots.com/
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #10 on: November 24, 2008, 12:22:32 AM »
Usually the caps and Transistors, regulator IC's, then resistors, and inductors/coils
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
woilly
Guest
« Reply #11 on: October 28, 2011, 06:35:48 PM »
if my memory is goog, Change C50.. 100uF 50V in the power supply behind the reels.
The cap in in the middle of pc board.
Logged
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #12 on: November 08, 2011, 12:01:31 AM »
Oddly enough I have the same problem when I forst turn the machine on and after trying to reset, curse at it open the door 600 times it seems I can just turn it on wait until the cabinet gets warm and turn it off and back on close the door and it usually works.  I couldn't find anything loose but maybe the laws of metal and heat make it work but I am still looking.  Too many other issues to work out besides this one.
Doogie
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #13 on: November 08, 2011, 12:14:12 AM »
You've probably got caps going bad in the power supply also. It is very common for bad caps to change value as they warm up
Logged
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #14 on: November 08, 2011, 12:39:52 AM »
Nice something else not working on the machine.  But it is bon fire weather so I get to burn stuff lol.   Would that cause other errors that wont clear as well?
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #15 on: November 08, 2011, 01:11:55 AM »
Any time your power supply isn't working properly you can have a plethora of issues, but you have to fix the primary problem which seems to be the power supply based on the fact that it works after it warms up. Having an extra power supply on the shelf is almost a law.
Logged
DJDOOGIE
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 26
« Reply #16 on: November 08, 2011, 01:14:34 AM »
Awesome I will start there
Logged
Doogie
I am a medic not a mechanic but I did have an erector set and legos as a kid.
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #17 on: November 08, 2011, 01:43:20 AM »
For those who haven't ever changed an S2000 PS:

<a href="http://www.youtube.com/v/9J36Bi4drXY&rel=0" target="_blank">http://www.youtube.com/v/9J36Bi4drXY&rel=0</a>

I've never changed one, so I thought I'd share.

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #18 on: November 08, 2011, 01:52:26 PM »
Jason   This guy gives you the general idea on how it's done, but most times it's not quite that easy. First off if the reels tend to fall over why not lay them on their side to begin with. duh

  Now this guy must have spent at least a hour moving wires back away from the knob ( actually it's a screw with a knob on the end )  The part he didn't tell you is that knob has like a ratchet assembly built into it and if it was last instaled tight you can turn that knob for a week and it won't come out. You must first break it loose with a stubby #2 phillips head screw driver.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #19 on: November 08, 2011, 06:32:58 PM »
Thanks Buzz!  Good to know.  I just checked my S2k and Game King.  The GK was ultra tight, but my S2k was a little loose.  I tightened it up to the "ratchet " point that you described.  We always learn something new.

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #20 on: November 08, 2011, 07:19:19 PM »
Ratchet only works one way. Guess you could call it a left handed ratchet !!  Never have had to use this link, but have it in my favorites if I ever have the need.   http://newlifegames.net/nlg/index.php?topic=1988.msg14955#msg14955
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.123 seconds with 19 queries.