Welcome, Guest. Please login or register.
November 22, 2024, 07:06:51 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  S6000 Tokenization?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S6000 Tokenization?  (Read 6242 times)
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« on: October 10, 2010, 12:38:26 AM »
Has anyone done this..

I have mine setup for coin-less. No hopper, no bill acceptor and no printer. Hand pay on all cash outs. Coin acceptor still in, but it is diverted back to tray.

I changed the dip switch 6 as per the manual. And changed denomination to 5 Cents. aAs well that didnt work so I tried with 25 Cents to no avail. Did a full clear and went to reprogram everything and the menu was really different. It did not follow the manual. Some featuers were missing and some were gained which I could not find in the manual.

I had 56-0000
51-1000
58-1000

56 option was still there, but when I zeroed it out, option 51 and 58 were no where to be found? I wanted to change the machine to nickles, and tokenization. So every coin entered would give you 100 credits. Sounded awesome but could not get it to work. I believe if it did work the machine would work as normal and pay-out the right amount. But In understand when you cash out it would revert back to doing the correct calculations by dividing by 20..


Any thoughts.. I just cant stop messing with this thing.. hehe gotta keep you all thinking..

Thanks.. Steve
Logged
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« Reply #1 on: October 11, 2010, 10:59:21 PM »
 Not one person has any comments on this? Heheh.. I know the answer is out there some where!

Heheh well thanks for reading.. I will keep looking around..


Steve
 
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: October 11, 2010, 11:35:57 PM »
Quote from: Red7 on October 10, 2010, 12:38:26 AM
56 option was still there, but when I zeroed it out, option 51 and 58 were no where to be found?

What do you mean by "zeroed it out"... Scratch Head 2
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #3 on: October 11, 2010, 11:51:03 PM »
I think the difference between 54 and 56 determans the payout of the hopper like 54 at 100    and 56 at 200  the hopper will pay out 100 coins then go to hand pay for anything over the 100
Logged
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« Reply #4 on: October 12, 2010, 02:15:59 PM »
If you put 56 to "0" then it goes to hand pay.

Max Credit "51"
Max win before hand pay "58"

Without using the tokenization. I am able to change these so that it can build 1200 credits, and or have a single win of 1200 credits. If Cash out is hit with any number of credits in machines it goes to hand pay. No hopper at all.

It would be nice to set this up the same way (Which I tried) I set the denomination to 5 Cents and tried the token to 1.00. SO every quarter it see's would add 100 credits to the meter. That way it would be easy to play. But when I pulled the MPU set the Dip 6 to on, and denomination to 5 cents, did Ram clear. Went into the menu to turn these features back to they way I need them. #51,58 were no there, although a lot of new numbers showed up that were not on my sheet.

Little test for you..

Thanks
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: October 12, 2010, 02:27:53 PM »
How do you put credits onto the machine if it's "coin-less"?
Dropping a coin in and having it divert back to the tray is not a "coin-less" machine.  Scratch Head

I've seen some casinos such as the Turning Stone Casino use a
player tracking system that requires the use of a "debit" card.
The machines does not accept paper money or coins.
« Last Edit: October 12, 2010, 06:28:02 PM by stayouttadabunker » Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #6 on: October 12, 2010, 05:21:09 PM »
To me a coinless machine has a validator and ticket printer the only way i know to put credits on is with a validator
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: October 12, 2010, 06:32:19 PM »
Quote from: paul on October 12, 2010, 05:21:09 PM
To me a coinless machine has a validator and ticket printer the only way i know to put credits on is with a validator

Quote from: Red7 on October 10, 2010, 12:38:26 AM
Has anyone done this..
I have mine setup for coin-less. No hopper, no bill acceptor and no printer. Hand pay on...



You need to install a bill acceptor then you knock off the credits with a key. yes
Logged
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« Reply #8 on: October 14, 2010, 10:45:25 PM »
Well I guess installing a bill acceptor would be the answer. The trouble there is that I'm in Canada.. seems to be shortage of those bill acceptors.. the Canadian heads cost more then the whole machine!

I'm looking to retail these machines. I would like to make them completely coin less, that way it takes all the troubles away. No bill acceptor or hopper, coin mechs to worry about. For now I have them working pretty good. Coin goes in and comes back to the tray.. It gives you something to do. I would like to use the tokenization so every coin would offer more credits for the customer. I have yet to get knee deep in to it. Once I got the machiens working great, I didn't feel like messing with them. I did try on one Progressive Blazing 7's machine to turn on the "token thing" just seemed like all the menus changed in the programming. Mode numbers that did not correspond with the manual, as well there were a bunch missing. I will have some time next week to document my findings. If anyone has tried this and already has the answer, please feel free to share.

Thanks Steve aka Red7
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #9 on: October 15, 2010, 12:37:37 AM »
TZ Tech developed a "circut" that adds credits with a button push (I think). And if you don't have a hopper, cashing out to hand pay works for your situation.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« Reply #10 on: October 28, 2010, 07:37:19 PM »
So I have been playing around with the Blazing 7's trying to turn on the tokenization.. I have tried multiple times with different denominations, different region settings.. and yes dip 6 is off.. And I cannot get option 22 "Tokenization" to show up in the menu at all... anyone had this problem? Solution?

Thanks

Steve
 
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #11 on: October 28, 2010, 09:29:40 PM »
John @ http://www.rudysdeals.com/ has the setup to go coinless. I put it in a Bally 6000 & it works 100%.
Ford
http://rudysdeals.com/index.php?route=product/product&path=38&product_id=831
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #12 on: October 28, 2010, 09:34:37 PM »
FORDSBS ,
How does it hook up?
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #13 on: October 28, 2010, 09:39:57 PM »
Real easy.
Pull hopper plug off board & have piece to plug in there.
On service button unplug wire & connect the other part you get. I has GOOD INSTRUCTIONS that come with it.
Ford
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #14 on: October 28, 2010, 09:43:10 PM »
I have it for customers to play & pass time while their car in being worked on for about 2 mo. & no problem with it.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #15 on: October 29, 2010, 02:45:53 AM »
Quote from: FORDSBS on October 28, 2010, 09:43:10 PM
I have it for customers to play & pass time while their car in being worked on for about 2 mo. & no problem with it.
Don't customers get mad when it takes two months to get their car fixed? arrow (just kidding ya')  Crazy frying pan   Cry Laughing Cry Laughing Cry Laughing


garfield
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« Reply #16 on: October 29, 2010, 01:40:04 PM »
Hey there,

Yeah I know they make that device to add credits.. I have 4 IGt Splus set for tokens and they work awesome.. every coin/token in to the machines gives you 50 credits.. and it didn't cost me anything.. It is wierd how Bally's offers this option but it doesn't work. I have tried 10 different market codes and cannot get option 22 to come up in the menu.. Can someone do me a favor and check in there 11d settings if they have an option "22"? maybe I am missing a chip on the board or something..

Thanks Guys..

Logged
Red7
NLG Member 101 to 500 Post
***

Total Karma Storms: 14
Offline Offline

Gender: Male
Posts: 124


I love my slots.....
« Reply #17 on: October 29, 2010, 03:28:41 PM »
K, I changed the Market code to 16 - United Kingdom. It should default to - One token is $1.00, so I set to denomination to 1 Cent. Then I set all my other settings to the proper ones. The machine takes a coin, but now for every 3 coins it gives you one credit??? Should be one coin = 100 credits, instead of 3 coins = 1. This is a challenge to everyone! Please help.....

Needless to say, I have put it back to USA, and 25 Cent...


Thanks Steve
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 19 queries.