Welcome, Guest. Please login or register.
May 15, 2024, 02:37:48 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Big Times Pay data		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Big Times Pay data  (Read 1902 times)
e2ekielus
Guest
« on: July 23, 2009, 03:36:20 PM »
Ok,
Ive just learned the Basics on My S+ Games to where im comfortable on how they operate. However, I only own one S2000 game (Big Times Pay) and Im not sure how These eproms on these systems work. Im sure they are very similar but dont want to assume. Here is what I found on my PCB:

Stepper Base:             SB100231
Stepper Game 1 of 2:  SG000136
Stepper Game 2 of 2:  SG000136

Version Chip:               VS009VXO
There are 2 more chips but they are not labeled.

Can Someone explain what each chip does and data for each one?
When I bought This slot, I had the tech drop denom from .25 to .05. I saw him pull board out replace one of the eproms, change denom on screen and that was it!
Can someone explain what chip he changed out and with what?
Thanks,
Noob
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #1 on: July 23, 2009, 07:33:28 PM »
most likely he put the key chip in to change the denomination and then put the base chip back in.
Logged
e2ekielus
Guest
« Reply #2 on: July 23, 2009, 11:51:19 PM »
Yeah Thats what i understood from reading here, However I am pretty sure I watched him correctly and After he replaced a chip (didnt see which one) He powered up, went through the on screen menu to denom, set it, backed out of menu, closed the door and was done. He never removed board again! So..... IDK?

anyway what about the chip data? can anyone help out?
Bill
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #3 on: July 23, 2009, 11:59:02 PM »
thats becuase you put in keychip , power up, wait, power back down, put in orginal chip power back up, and then your in change mode. once done making chings you exit and your done. the chip in a way just enables being able to make changes on the next power up
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.105 seconds with 19 queries.